三峡库区生基包滑坡监测及成果分析

生基包滑坡监测属于三峡库区奉节县三期地质灾害监测预警项目之一,该滑坡位于长江左岸,临近人口稠密的安坪乡集镇,地理位置重要。三峡水库175 m蓄水后,其变形破坏特征有何表现？对航道安全运营有无潜在威胁？是否会对滑坡体上的重要建筑及村民生产生活构成危害？针对这些问题,首先分析了滑坡的工程地质特征及主要的影响因素;其次,确立以4种监测手段为主、人工巡查为辅的监测方案;通过对大地变形GPS、深部位移、滑坡推力等几种监测方法的运用及对其成果进行分析研究,以实例说明其在滑坡监测中的应用;再次,结合宏观人工巡查进行对照分析,以充分说明大地变形、深部位移和滑坡推力监测在实际运用中的可行性;最后,根据监测结论提出对生基包滑坡防治的建议。     

河南洛宁段河金矿流体包裹体研究和矿床成因

河南省洛宁县段河石英脉型金矿主要包括石寨沟和岭东两个矿区,分别由3～4条含金石英脉构成。矿化过程从早到晚包括石英-黄铁矿、石英-多金属硫化物和石英-碳酸盐等3个阶段．其中中阶段金矿化最强,次为早阶段。各阶段石英中流体包裹体以气液两相包裹体为主．次为纯液体包裹体。激光拉曼测试表明,气液两相包裹体的液相为H2O,气相主要为Ho和CO2混合、纯H2O,次为纯CO2;纯液体包裹体为纯H2O。石寨沟矿区包裹体均一温度从早到晚依次为240．9～315．9℃．188．7～304．5℃,137．3～259．3℃：流体盐度变化依次为（6．74～12．85）wt%NaCl．eq,（2．41～8．68）wt％NaCl．eq,（2．24-7．86）wt%NaCl．eq。岭东矿区均一温度从早到晚依次为303．7-343．1℃,251．8-325．4℃,305．7～355．0℃：流体盐度变化依次为（5．11～11．70）wt％NaCl．eq,（2．74-10．11）wt％NaCl．eq,（0．53-6．74）wt％NaCl．eq。两矿区主成矿期流体均为中温、低盐度,早阶段流体为改造热液和变质热液的混合体,含一定量CO2,且流体CO2含量和盐度从早到晚逐渐降低。石寨沟矿区包裹体均一温度逐渐降低,而岭东矿区包裹体均一温度先降后升,加之岭东矿区各阶段成矿温度均高于石寨沟矿区．表明成矿流体系统主要受岩浆热驱动,岭东矿区更靠近岩体,且在晚阶段又有脉动性的岩浆加热．段河金矿区南部存在隐伏岩体。     

无外加流体、350℃和差异应力条件下硫化物再活化实验研究

红透山块状硫化物矿石主要成分为黄铁矿、磁黄铁矿、黄铜矿、闪锌矿和石英、角闪石、黑云母等脉石矿物。将此矿石烘干后作为试料置于岩石三轴应力试验机,在13h内将轴压、围压和温度分步升至1276MPa、414MPa和350℃,然后在空气中自然冷却至室温。实验产物中黄铁矿、石英、长石等以脆性碎裂为主,而磁黄铁矿、黄铜矿、闪锌矿和云母等以塑性变形为主。再活化的黄铜矿、磁黄铁矿和少量闪锌矿呈脉和网脉穿插黄铁矿碎斑。实验结果表明,即使没有外来流体加入．构造动力作用所导致的流体包裹体破坏所释出的流体,就足以使成矿物质发生活化转移和再活化。     

深层裂缝性储层防漏堵漏实验评价研究

深层裂缝性气藏具有异常高压、高产等特点,钻井完井过程中易出现又喷又漏等复杂事故,因此需做好“防漏为主、堵漏为辅”的防漏堵漏措施。通过全尺寸堵漏装置进行了高压静态、动态模拟堵漏实验,优选配方组合,并系统评价了防漏、堵漏配方的封堵能力、承压能力以及酸溶性,评价研究出的防漏堵漏配方,具有酸溶率高、堵塞强度高、返排效果好等特点,为防漏、堵漏方案现场实施提供依据。     

甘肃庆城庄19井区上三叠统延长组长82亚油层组低渗透储层的地质特征

长82亚油层组是甘肃庆城地区庄19井区上三叠统延长组中储集砂岩相对富集的层位,但砂岩低渗透性的特点显著,成为影响该区石油储产量增长的主要地质因素。结合前人的相关工作,通过钻井岩心观察、测井曲线分析、储层岩石实验测试等工作,详细地分析了庄19井区长82亚油层组低渗透储层的地质特征,认为沉积微相和压实作用、胶结作用是控制低渗透性储集砂岩发育和分布的主要地质因素,寻找以水下分流河道微相为代表的有利储集相带砂岩体是油气勘探的重要方向。     

海拉尔盆地贝西斜坡北部地区储层特征及影响因素分析

通过测井曲线的标准化处理及信息提取、岩心及录井岩屑观察、铸体薄片、物性分析、扫描电镜、压汞分析等技术手段,研究了海拉尔盆地贝西斜坡北部地区南屯组储层的主要岩性特征、物性特征、储集空间类型和影响因素.研究结果表明.海拉尔盆地南屯组以内陆湖相碎屑岩为主,主要包括角砾岩、砾岩、砂砾岩、粗砂岩、细砂岩、粉砂岩、泥质砂岩及泥岩等.南一段储层孔隙度平均值为6.15%,渗透率平均值为0.31 × 10-3μm2,为低孔特低渗型孔隙特征;南二段储层孔隙度平均值为12.18%,渗透率平均值为2.79× 10-3μm2,属于中孔低渗型孔隙特征.储集空间类型以粒间孔隙为主,发育一定的次生孔隙.喉道分为4种类型(Ⅰ类、Ⅱ类、Ⅲ类、Ⅳ类).扇三角洲前缘分支水道砂体、扇三角洲平原辫状河道砂体和滨浅湖砂坝微相砂体为该区有利的储层砂体类型.储层性质主要受沉积相和成岩作用影响.     

Numerical Experiment on Two-Dimensional Line Thermal

The time evolution of a two-dimensional line thermal-a turbulent flow produced by an initial element with signifi-cant buoyancy released in a large water body, is numerically studied with the two-equation k - e model for turbulence closure. The numerical results show that the thermal is characterized by a vortex pair flow and a kidney shaped concentra-tion structure with double peak maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless time around 10. There are two regions in the flow field of a line thermal: a mixing region where the concentration of tracer fluid is high and the flow is turbulent and rotational with a pair of vortex eyes, and an ambient region where the concentration is zero and the flow is potential and well-described by a model of doublet with strength very close to those given by early experimental and analytical studies. The added virtual mass coeffi-cient of the thermal motion is found to be approximat     

Geophysical evidence of mud diapirism on the Mediterranean Ridge accretionary complex

Mud volcanoes, mud cones, and mud ridges have been identified on the inner portion of the crestal area, and possibly on the inner escarpment, of the Mediterranean Ridge accretionary complex. Four areas containing one or more mud diapirs have been investigated through bathymetric profiling, single channel seismic reflection profiling, heat flow measurements, and coring. A sequence of events is identified in the evolution of the mud diapirs: initially the expulsion on the seafloor of gasrich mud produces a seafloor depression outlined in the seismic record by downward dip of the host sediment reflectors towards the mud conduit; subsequent eruptions of fluid mud may create a flat topped mud volcano with step-like profile; finally, the intrusion of viscous mud produces a mud cone.The origin of the diapirs is deep within the Mediterranean Ridge. Although a minimum depth of about 400 m below the seafloor has been computed from the hydrostatic balance between the diapiric sediments and the host sediments, a maximum depth, suggested by geometric considerations, ranges between 5.3 and 7 km. The presence of thermogenic gas in the diapiric sediments suggests a better constrained origin depth of at least 2.2 km.The heat flow measured within the Olimpi mud diapir field and along a transect orthogonal to the diapiric field is low, ranging between 16 ± 5 and 41 ± 6 mW m^–2. Due to the presence of gas, the thermal conductivity of the diapiric sediments is lower than that of the host hemipelagic oozes (0.6–0.9 and 1.0–1.15 W m^–1 K^–1 respectively).We consider the distribution of mud diapirs to be controlled by the presence of tectonic features such as reverse faults or thrusts (inner escarpment) that develop where the thickness of the Late Miocene evaporites appears to be minimum. An upward migration through time of the position of the décollement within the stratigraphic column from the Upper Oligocene (diapiric sediments) to the Upper Miocene (present position) is identified.     

Validation of a finite difference method for the simulation of vortex-induced vibrations on a circular cylinder

The Karman Vortex Street generated by a circular cylinder is investigated by the numerical solution of the compressible Navier–Stokes equations in the incompressible Mach number range (Mach<0.3) using the Beam and Warming implicit scheme. The agreement with the fully incompressible projection method (Chorin, 1968) is fairly good while convergence time is very much better. The investigation suggests that the compressible Navier–Stokes equations may be used as an efficient alternative to study incompressible flows as well. Mach numbers just below 0.3 are enough to simulate incompressible flow behavior and at the same time do not cause numerical ill-conditioning in the solution. In addition, some relevant features of the vortices generated and carried by the wake of the cylinder could be fairly well captured.     

Numerical Solution of Lock-Release Gravity Current with Viscous Self-Similar Regime

Lock-release gravity currents with a viscous self-similar regime are simulated by use of the renormalization group(RNG) k - ε model for Reynolds-stress closure. Besides the turbulent regime with initially a slumping phase of a conslant current front speed and later an inviseid self-similar phase of front speed decreasing as t^-1/3(where t is the time measured from release), the viseous self-similar regime is satisfactorily reproduced with front speed decreasing as t^-4/5,consistent with well known experimental observations.