波浪作用下软基上沉入式大直径圆筒结构的变位计算模型

文章通过所建立的软粘土地基土体的循环累积变位分析模型，对大直径圆筒原型结构在波浪引起的水平向循环荷载作用下的基础稳定性进行研究，计算分析了简体随循环次数的变位状况和临界稳定状态时简体所受到的土压力分布以及临界稳定状态的判别参数c值。     

浅水破碎波对直立圆柱作用力的试验研究

分析了桩柱破波力的构成特性,认为破碎波与桩柱作用过程中在不完全绕流区将出现由于附连质量迅速变化引起的冲击力和柱前后波面高度差引起的附加压差力;影响破碎波对直立圆柱作用力的因素应该包括确定破波特性的水底坡度i、入射深水波陡H_0/L_0及代表圆柱对破波作用影响的相对柱径D/H_0。通过从i=1/100到1/15五种底坡上桩柱破波力的系统试验,探索了桩柱破波力的作用特性,归纳了计算桩柱破波力的经验公式。     

在波浪荷载作用下插入式大圆筒结构稳定性分析评述

结合某大圆筒结构工程，对大圆筒结构稳定性分析中的各种计算方法进行了综合评述与讨论，尤其对大圆筒结构在波浪荷载作用下，各方法采用的受力计算模式及其计算结果进行了深入剖析，明确了一些概念性问题，有助于促进本课题的进一步发展。     

大直径圆筒振动下沉动力分析方法研究

本文运用纵向强迫振动多自由度结构和土体等代流变模型 ,对大直径圆筒振动下沉过程进行模拟计算 ,确定在振动锤作用下大直径圆筒的动力响应、筒壁峰值应力和可沉入性 ,并通过工程试验结果验证模拟计算方法的适用性 ,为施工控制提供依据。     

Rotating flow past a short,sliced cylinder at finite Rossby number

Abstract

Flow past a short obstacle in a rotating reference frame generates a wake that is crucial to the overall flow structure if the Rossby number is of the order of the quarter power of the Ekman number. We present here a theory for such flows for the case when the obstacle's top is an oblique, planar surface. The results arise from a combination of asymptotic analysis and numerical computation, and show that even weak asymmetry generates significant global effect on the entire flow-field. Comparisons with the experiments reported by Foster and Davies (1996) are generally good when the high edge is at 90° to the oncoming flow.     

Force and flow characteristics of a circular cylinder with uniform surface roughness at subcritical Reynolds numbers

The main purpose of this study is to establish a better understanding of the relationship between drag reduction and surface roughness. Experiments were conducted to measure the force and flow characteristics of a circular cylinder with different types of artificial surface roughness over the range 6 × 10³ < Re < 8 × 10⁴ (Re is based on the cylinder diameter D). The roughness cylinder was formed by covering the exterior surface of the cylinder with uniformly distributed (1) sandpaper, (2) netting, and (3) dimples. The roughness coefficient ranged from k/D = 0.0028 to 0.025 (k is the roughness height). A detailed quantitative measurement of the flow field around the cylinder using Particle Imaging Velocimetry (PIV) was carried out. The hydrodynamic force coefficients (drag and lift) of the rough cylinders are compared against those of a smooth cylinder measured under the same flow conditions. It is found that certain configuration of surface roughness significantly reduces the mean drag coefficient of the cylinder, particularly at large Reynolds numbers. In addition, the root-mean-square (r.m.s.) lift coefficient of the rough cylinders is considerably lower than that of a smooth cylinder.     

分离盘控制圆柱涡激振动的数值模拟研究

圆柱涡激振动问题一直以来备受关注,分离盘作为涡激振动抑制装置得到广泛研究。分离盘长度L与圆柱直径D之比L/D是影响抑制效果的主要因素。运用有限体积法结合RANS方程与一定的湍流模式离散和求解流场,通过编写自定义程序,使用动网格模拟结构物的运动带来的流域边界的变化,针对弹性支撑的圆柱及附加长度为0.5 D的分离盘模型,在约化速度Ur为2.5~13的情况下,对涡激振动及其抑制进行研究。结果表明:分离盘可以抑制甚至消除圆柱涡激振动,99%以上的振幅被抑制;锁定区始点被推后,锁定区变窄;附加分离盘的圆柱阻力和升力被抑制;其斯特鲁哈数(St)稍高于单圆柱St但差别不大。     

EXPERIMENTS ON FLOW AROUND A CYLINDER IN A SCOURED CRANNEL BED

1 INTRODUCTION'LOcal scour around a pier is a result of the interatiOn amongst the pier, the aPproach flow and theerodible bed. The Presence of a pier results in a stagnation pressure build-up in front of the pier and athree-dimensional tUrbulent flow echaracterized by the downward flow ahead of the pier and the so-called horseshoe vortex along the base of the Pier forms itself The flow modifies the erothe bed inthe vicinity of the pier when local scour takes place (Graf and AJhnakar l…     

The response of a horizontal conducting cylinder embedded in a uniform earth for uniform and line current sources

The response of a horizontal conducting cylinder embedded in a uniform conducting earth is studied using mathematical models of uniform and line current source excitation for the period range 10 to 10⁴ s. The line current source is located at heights ranging from 100–750 km above the surface of the earth. From the calculated results, it is shown that for periods greater than 10³ s the ratioE _x /H _y at the surface of the earth for localized fields, such as the auroral and equatorial electrojet normally situated at heights of about 100 km, is considerably different from that for a uniform source. The results presented also show that the magneto-telluric method of geophysical prospecting for ore bodies in regions of the electrojet may not be very practicable for periods exceeding 10³ s.     

A direct method for interpreting magnetic anomalies—the case of a horizontal circular cylinder

A new method is introduced here to interpret the magnetic anomalies with special reference to vertical magnetic anomalies of a horizontal circular cylinder. The parameters of the cylinder are found to be related toV, ∂V/∂x and∂V/∂z at the origin of the cylinder. HereV is the observed anomaly,∂V/∂x and∂V/∂z are its horizontal and vertical derivatives respectively. The origin may be located working out an equality,viz.,3(∂V/∂z) ²=2V∂²V/∂z² which is true only at the origin. Thus, once the cylinder is located,V, ∂V/∂x and∂V/∂z at its origin can be determined and hence its parameters. The procedure is illustrated with a theoretical example.