大型智能控制压扭多轴加载试验机的研制

设计和研制一台大型智能控制压扭多轴加载试验机,形成一个集动静加载、扭剪、常规三轴等功能为一体的多功能土动力试验平台。该试验机具有如下特点:(1)试样尺寸大,高度可达600mm,且可根据试验需求更换大小不同的试样及相应传感器;(2)加载自由度多,可独立施加轴力、扭矩、内压、外压、孔压及相应的位移,实现5个不同物理量的独立控制,从而大大拓宽可施加的应力路径范围;(3)控制智能化,可先将拟进行的应力路径或应变路径写入程序中,试验过程中即可由计算机自动控制。测试结果表明,该试验机的控制精度能够满足土工材料试验的要求。     

Solutions for the deformations and stability of elastoplastic hollow cylinders subjected to boundary pressures

In this paper, a closed-form solution is presented for the stress and displacement distributions throughout a hollow cylinder subjected to uniform pressures acting on its internal and external boundary surfaces under plane strain conditions. The material is assumed to be elastoplastic, obeying a Mohr–Coulomb failure criterion, and exhibiting dilatant plastic deformation according to a non-associated flow rule. The newly developed analytical solution is verified through comparison with the solutions obtained from an infinite boundary problem (for which a closed-form solution exists), and numerical analyses using the program FLAC. The solution is also compared with the results of a borehole collapse test on a thick-walled hollow cylinder of synthetic shale. The analytical solution can be used to calculate the stress and displacement distributions around boreholes and other cylindrical cavities under both infinite and finite boundary conditions under both drained and undrained conditions. Copyright © 1999 John Wiley & Sons, Ltd.     

定向剪切应力路径下冻结黏土变形特性试验

为研究复杂应力路径下冻土的强度与变形特征,采用冻土空心圆柱仪（FHCA-300）对不同负温状态下的饱和冻结黏土开展定向剪切试验,基于不同剪切方向下冻结黏土的轴向和扭剪分量的应力-应变关系,探讨土样的剪切变形特征、各向异性属性以及剪切带的演变规律,并考察温度、大主应力方向角、平均主应力以及中主应力系数等因素对冻结黏土强度的影响。结果表明：平均主应力p值对冻结黏土的应力-应变关系影响显著,尤其是p=4.5 MPa时具有较高的剪切强度,且该值可能为压融临界p值;大主应力方向变化会诱发冻结黏土的各向异性,随着大主应力方向角的增加,冻结黏土剪切强度逐渐降低,并有明显的剪切带产生;中主应力系数的增加使得轴向强度有逐渐降低的趋势,但对剪切强度影响不明显;随着温度的降低,冻结黏土强度逐渐增大,试样发生脆性破坏并出现剪切破裂面,其剪切强度主要取决于冰颗粒和土颗粒的胶结力。     

岩石空心圆柱扭剪仪研制的重点问题及研究进展

随着深部岩体工程的发展,开挖卸荷导致的应力主轴旋转问题引起了广泛关注。首先,分析总结了岩体工程中存在的应力主轴旋转问题及其对岩体工程稳定性的影响;其次,介绍了土体空心圆柱扭剪仪的发展现状及其特点,从荷载的施加方式、试样尺寸两个方面指出了研制岩石空心圆柱扭剪仪的关键问题,并与土体空心圆柱扭剪仪进行了对比,提出了新的扭矩施加技术和合理的岩石空心圆柱试样尺寸;最后,总结概括了考虑应力主轴旋转的土体本构模型的研究成果,并对考虑应力主轴旋转的岩石本构关系的研究进行了展望。该工作将对岩石空心圆柱扭剪仪的研制和相关理论的研究提供一定的参考和指导。     

岩石空心圆柱扭剪仪试验能力

针对自行研制的岩石空心圆柱扭剪仪可独立控制4个加载参数（轴力、扭力、内围压和外围压）的功能,通过数学和力学分析,系统地整理出几种易于实现且符合实际工程的应力路径及加载方式：在轴力与内围压满足一定关系的前提下,可以获取岩石的抗拉强度,提供一种新型测量岩石抗拉强度的方法;通过控制内外围压及轴力,可以进行常规三轴试验与真三轴试验,克服了现阶段岩石真三轴试验中试验装置复杂、试样加载面摩擦大的缺点;在轴力与内、外围压分别满足一定关系时,可以分别实现平均应力p不变与中主应力系数b不变的应力路径,用于研究应力主轴旋转对岩石力学性质的影响。上述应力路径的实现对岩石力学性质的研究以及现阶段岩石室内试验的发展具有重要意义。     

Benchmark computations for flows around a stationary cylinder with high Reynolds numbers by RANS-overset grid approach

The aim of this paper is to evaluate the accuracy, stability and efficiency of the overset grid approach coupled with the RANS (Reynolds Averaged Navier-Stokes) model via the benchmark computations of flows around a stationary smooth circular cylinder. Two dimensional numerical results are presented within a wide range of Reynolds numbers (6.31 × 10⁴ ∼ 7.57 × 10⁵) including the critical flow regime. All the simulations are carried out using the RANS solver pimpleFoam provided by OpenFOAM, an open source CFD (Computational Fluid Dynamics) toolkit. Firstly, a grid convergence study is performed. The results of the time-averaged drag and lift force coefficients, root-mean square value of lift force coefficient and Strouhal number (St number) are then compared with the experimental data. The velocity, vorticity fields and pressure distribution are also given. One main conclusion is that the numerical solutions in regard to a fixed cylinderare not deteriorated due to the implementation of the overset grid. Furthermore, it can be an appealing approach to facilitate simulations of Vortex Induced Vibrations (VIV), which involves grid deformation. The present study is a good start to implement the overset grid to solve VIV problems in the future.     

不同倒角半径下方柱绕流的数值模拟及水动力特性研究

为了研究不同倒角半径对方柱绕流特性的影响,采用有限体积法,模拟了雷诺数Re为22 500、倒角半径为0.1D(D为方柱边长的长度)、0.2D和0.3D时方柱的绕流过程。方柱近壁面采用增强壁面函数,模型采用SST k–?湍流模型。根据模拟结果给出了不同倒角半径下方柱的流场涡量图以及阻力系数Cd和升力系数Cl;利用快速傅里叶变换法得到斯托罗哈数St。结果表明,倒角半径的增加改变了方柱的分离点,使得尾流区长度增加,旋涡尺度减小;Cd和Cl的振动幅值呈现先减小后增大的趋势,倒角半径为0.1D和0.2D时方柱受力较小,不存在倒角时方柱受力较大,倒角半径为0.3D时方柱受力最大;随着倒角半径的增加,柱体截面形式越接近圆形,斯托罗哈数逐渐增大,漩涡脱落频率更快。     

软土地基上影响预应力钢筒混凝土管相对转角关键因素研究

预应力钢筒混凝土输水管线(PCCP)已广泛应用于地下输水工程,特别是南水北调工程。管道接口属于半刚性结构,相邻管道可产生一定的自由转角,在自由转角范围内两管之间不会产生内力。当相对转角大于自由转角时,两管会产生相互作用力,作用力过大会导致PCCP管的破坏,如何有效地控制不均匀软土地基上相邻管道转角成为研究管道安全的关键问题之一。首先分析了导致PCCP管线产生相对转角的机制,结合现场试验和数值分析对控制PCCP管线相对转角的关键因素进行研究。研究表明,相对转角的敏感因素为管道底部碎石垫层厚度、腰部以下砂垫层（砂包角）厚度和压实度,随着碎石垫层厚度增大、砂垫层（砂包角）厚度和压实度增加,管线相对转角降低,通过控制这3个因素可有效控制PCCP管的相对转角。研究成果可为软土地基上PCCP输水工程设计提供依据和指导。     

Hydromechanical behavior of radially multilayered cylinders under time-varying loads

ABSTRACT

Geotechnical strata are often treated as horizontally homogeneous for hydromechanical analysis due to the vertical deposition of geological layers; however, such a treatment becomes no longer valid when vertical drilling or construction causes the localized disturbance of subsurface, which would result in radial heterogeneity of geomaterials. This paper presents a poroelastic solution for the saturated multilayered cylinder where multilayer is used to represent radial heterogeneity. After the application of Laplace transform, the governing equations in cylindrical coordinates are derived to obtain the stiffness matrix between stresses, displacements, and pore water pressure. The global matrix is assembled by the boundary conditions and the compatibility of interfaces between adjacent layers. Under time-dependent horizontal compression loads, a parametric study is performed for a cylinder comprised of two layers with distinct properties, and the results show that the load frequency and radial heterogeneity play a significant role in hydromechanical behavior of geomaterials: (1) the time-varying loading can induce a negative pore pressure, and the influence of cyclic loading with a high frequency is limited near the outer surface; (2) the radial heterogeneity due to permeability and compressibility affects the development of pore pressure.     

Prediction of streamwise flow-induced vibration of a circular cylinder in the first instability range

The streamwise flow-induced vibration of a circular cylinder with symmetric vortex shedding in the first instability range is investigated, and a wake oscillator model for the dynamic response prediction is proposed. An approach is applied to calibrate the empirical parameters in the present model; the numerical and experimental results are compared to validate the proposed model. It can be found that the present prediction model is accurate and sufficiently simple to be easily applied in practice.