鸭绿江口溶解有机碳的研究

１９９６年５月采样测定鸭绿江口溶解有机碳（ＤＯＣ）的含量,得出分布变化特征,并同其它一些河口的溶解有机碳进行了比较。鸭绿江口表层水溶解有机碳的平均含量为２０８μｍｏｌＣ／Ｌ。在盐度大于１．６的河口区,溶解有机碳的分布主要受海水稀释作用控制;在盐度０～１．６的区域溶解有机碳的浓度随盐度的增加而明显增加。在最大混浊带,ＤＯＣ的浓度最高,表明有颗粒有机碳转化为溶解有机碳。丹东市以上流段,河水中溶解有机碳的含量相对较低,说明由丹东市引入的工业及生活污水对鸭绿江水体中溶解有机碳的含量有一定的影响。     

胶州湾水体中的二氧化碳体系

采用库仑滴定法测定了胶州湾海域４个航次的总二氧化碳,根据测定的总二氧化碳的数据计算了二氧化碳各分量的含量及二氧化碳分压,得到了胶州湾水体中二氧化碳体系的平面分布、垂直分布及周日变化规律,并对结果进行了初步探讨 。     

沈北煤田煤中琥珀的植物来源和稳定同位素的古环境意义

琥珀是由古代植物代谢产生的树脂聚合物形成的化石。琥珀中的有机质保存环境稳定、封闭,能很好地记载其形成时期的古植物和古环境等信息。本次研究运用气象色谱质谱联用仪（GC-MS）和元素分析稳定同位素质谱仪（EA-IRMS）等测试方法,研究了沈北煤田煤中琥珀的有机地球化学组成、稳定同位素和化合物单体碳同位素特征。结果表明,琥珀中的饱和烃以二萜化合物为主（占73.45%）,芳香烃以松香烷型化合物为主（56.17%）;高含量的贝壳杉烷、雪松烷、扁枝烷和松香烷型化合物指示琥珀来源于松柏类植物,且以柏科植物为主。沈北琥珀的δ13C值为-22.8‰ ~ -21.2‰,与同时期其他地区琥珀的δ13C值相似;氢同位素变化范围较小（-297.2‰ ~ -276.0‰）,氧同位素值为17.4‰ ~ 31.6‰。琥珀的稳定同位素组成（碳、氢和氧）进一步证明琥珀来源于裸子植物。琥珀的δ13C值主要与其形成时的全球气温变化和大气组成有关。沈北琥珀的氢和氧同位素组成主要受植物种类（松柏类）以及植物生长的局部气温和降水条件有关。琥珀稳定碳同位素有望成为研究古气候和古大气组成的良好载体,琥珀的氢和氧同位素可以反映形成时期的古环境条件,但仍需进一步深入研究。     

Settlement over peat on the A5 at Pant Dedwydd near Cerrigydrudion, North Wales

The A5 London to Holyhead trunk road suffers from large and varied settlements at Pant Dedwydd where it crosses a geotrophic peat bog developed on the glacial drift that overlies bedrock of Silurian Denbigh Grits Group. Recent carriageway settlements have created an undulating profile over a 100 m stretch, restricting forward visibility and posing recurring and persistent difficulties for highway maintenance. The highly compressible peat underlies almost 400 m of highway, ranges up to 7 m deep and a typical profile consists of an upper sphagnum peat layer and a basal reedy, woody and sedge grass peat. The highway was originally constructed by Thomas Telford in 1819 as a low floating embankment over the organic terrain. Increases in traffic over the intervening period together with successive asphalt overlays have resulted in a history of major repairs and although records are incomplete it is likely that the carriageway is now over 2 m thick over parts of the bog. Comprehensive geological investigations carried out to characterize the peat deposit included dynamic probe holes, boreholes and a trial pit. No unusual subsurface conditions were identified. However, scrub willow or grey sallow (Salix cinerea) was observed growing in spiraea thickets alongside the deepest hollows in the highway. The willows may contribute to the road subsidence by extraction of water from the peat beneath the carriageway. Accordingly, removal of the scrub willow and conventional re-grading of the carriageway have been recommended to correct the existing problem.     

长北地区生油岩干酪根的特征

本文应用元素、碳同位素和红外光谱分析,研究了长北地区生油岩干酪根的地球化学特征,结果表明该地区生油岩为陆相淡水湖相沉积,干酪根类型主要为腐殖型。随着埋深增加,同类型干酪根的成熟度增大。     

活性炭从硫脲浸出液中回收金的工艺研究

本文研究了在酸性硫脲浸出液中活性炭回收金的工艺过程,实验表明,在该浸出液中活性炭对金具有较高的吸附速度、吸附率和吸附容量并易于解吸,为工业应用提供了可靠的技术依据。     

沉积地层中成矿作用的碳同位素特征和含矿缺氧盆地成因新观点

沉积盆地内地层中碳的来源 ,根据其碳、氧同位素特征可归纳为 :海洋沉积碳酸盐碳、生物碳、热解非生物成因碳、大气淡水方解石碳和热卤水系统中的无机碳。热水成因的金矿及喷气 沉积矿床中的碳都具有深源成因的无机碳。深部含无机碳的热流体喷溢到海洋底部可以解释为扩张盆地底部形成的缺氧环境和含矿黑色页岩的主导原因     

Relation of streams, lakes, and wetlands to groundwater flow systems

 Surface-water bodies are integral parts of groundwater flow systems. Groundwater interacts with surface water in nearly all landscapes, ranging from small streams, lakes, and wetlands in headwater areas to major river valleys and seacoasts. Although it generally is assumed that topographically high areas are groundwater recharge areas and topographically low areas are groundwater discharge areas, this is true primarily for regional flow systems. The superposition of local flow systems associated with surface-water bodies on this regional framework results in complex interactions between groundwater and surface water in all landscapes, regardless of regional topographic position. Hydrologic processes associated with the surface-water bodies themselves, such as seasonally high surface-water levels and evaporation and transpiration of groundwater from around the perimeter of surface-water bodies, are a major cause of the complex and seasonally dynamic groundwater flow fields associated with surface water. These processes have been documented at research sites in glacial, dune, coastal, mantled karst, and riverine terrains. Received, April 1998 · Revised, July 1998, August 1998 · Accepted, September 1998     

Depositional environment of a Kimmeridgian carbonate 'black band' (Akkuyu Formation, south-western Turkey)

The Upper Jurassic Akkuyu Formation of south-western Turkey consists of pale-coloured carbonate facies, but includes a peculiar ‘black band’ at its base. In order to characterize the depositional environment of this level, a sedimentological, organic and inorganic geochemical study was performed on 30 samples. Three units are distinguished. Unit 1 consists of black marlstones, very rich in organic carbon (22–30%) with HI (hydrogen index) values around 600. The organic matter is an amorphous homogeneous material even at nanoscopic scale. This unit is also characterized by a very high concentration of V ( >1000 p.p.m.) and a δ¹³C_org value around ?26·5‰. Unit 2 shows thin-bedded black limestones with chert layers. Its organic content varies from 2% to 6%. As in unit 1, the HI values are uniformly high (600), and gas chromatography shows a high quantity of hopanes. The V concentration is also high (≈400 p.p.m.). The unit has a high Sr/Ca ratio, an organic carbon isotopic ratio close to ?28·7‰ and diffuse, nanoscopically amorphous organic material that is closely associated with pyrite. Unit 3 corresponds to the white limestones overlying the ‘black band’. This calcitic facies is almost devoid of organic carbon (<0·1%). The δ¹³C_org values are similar to those of unit 1 (?25·5‰ to ?26‰). Deposition occurred in a basinal environment surrounded by a carbonate platform. Primary productivity was high but not exceptional; terrestrial organic inputs were scarce. Bottom waters were probably euxinic during the deposition of unit 1. The presence of both hopane-rich and sulphur-rich nanoscopically amorphous organic matter may be the result of strong sulphate-reducing bacterial activity. Coupled with low amounts of iron, this led to intense vulcanization of the organic matter and thus good preservation. With the onset of unit 2 deposition, environmental conditions became less extreme, perhaps because of cooler water temperatures. Finally, the depositional conditions became oxic, leading to the accumulation of pale-coloured organic-poor limestones of unit 3.     

Calculation of reflectance values for two models of texture of carbon materials

This paper presents two models of texture of carbon materials possessing porosity. For both models, R_MAX, R_INT and R_MIN values of reflectance have been calculated by modified Ting's 3A method [Ting, F.T.C., 1978. Petrographic techniques in coal analysis. In: C. Karr (Ed.), Analytical Methods for Coal and Coal Products, Vol. 1. Academic Press, New York, 1978, pp. 3–25]. It has been found that the reflectance indicating surface (RIS) for the studied models of texture changes from a biaxial negative up to a biaxial positive one (the type A texture) depending on the shape and size of pores. In particular case, for the type B texture and the isometry of pores, a uniaxial negative RIS is merely obtained.