四川甘洛铅锌矿集区闪锌矿Rb-Sr等时线年龄及其地质意义

四川甘洛铅锌矿集区位于扬子地块西南缘的川滇黔铅锌成矿带北段,是四川主要的铅锌产地,具有重要经济价值。为研究该矿集区铅锌成矿时代、成矿大地构造背景和成矿机制,以支撑区域找矿勘查,在区内选择赤普和尔呷地吉两个典型铅锌矿床开展闪锌矿Rb-Sr同位素体系研究,获得Rb-Sr等时线年龄246 ± 17 Ma（MSWD= 2.3）,表明区内铅锌矿化作用发生于早三叠世,与古特提斯洋闭合时限吻合;闪锌矿(87Sr/86Sr)i值变化于0.71061~0.71393,高于幔源87Sr/86Sr值0.70355及峨眉山玄武岩87Sr /86Sr值0.704979~0.706938,低于基底岩石87Sr /86Sr值0.7243~0.7288,暗示成矿物质主要来源于地壳。综合前人研究,认为在古特提斯洋闭合背景下,强烈造山运动诱发盆地卤水深循环并萃取基底地层中的成矿物质,在峨眉山玄武岩岩浆活动的热动力条件下,含矿流体沿马拉哈断裂进一步迁移沉淀形成了赤普和尔呷地吉铅锌矿床。马拉哈深大断裂及造山作用派生的层间或断层破碎带、碳酸盐岩地层是甘洛地区主要的控矿要素。     

石煤钒矿成分分析标准物质的研制

石煤钒矿资源的开发和合理利用需要对其成分进行准确的分析测试和质量控制.目前,国内外尚未有石煤钒矿成分分析的标准物质,现有钒成分分析标准物质无论是其五氧化二钒含量,还是定值成分都无法满足我国对石煤钒矿勘查、开发和研究需要.本文对采自湖北省崇阳县小源冲钒矿、湖南省芷江县牛牯坪钒矿、湖南省古丈县岩头寨钒矿和湖南省凤凰县黑冲钒...     

海山富钴结壳标准物质研制

报道了我国与俄罗斯合作研制的三个海山富钴结壳标准物质GSMC-1,2,3.这三个标准物质的原样分别取自西太平洋麦哲伦海山和中太平洋海山.样品经风干、选配、球磨制备成均匀的粉体样品,其均匀性采用高精度的X-射线荧光光谱法检验.样品的化学组分采用国内外多实验室协同分析方式定值,有八个国内实验室和八个国外实验室参加了合作分析.测试组分均为57个,其中GSMC-1,2有43个组分定为保证值,10个组分作为参考值;GSMC-3有45个组分定为保证值,8个组分作为参考值.经2a多的试用,三个标准物质已于2005年被国家计量部门批准为国家一级标准物质,其编号分别为GBW07337,GBW07338和GBW07339.     

稀土催化材料在工业废气、人居环境净化中的研究与应用综述

阐述了稀土催化材料在工业废气、人居环境净化方面的研究与应用现状,并对稀土催化材料的发展进行了展望,认为将稀土催化材料用于工业有机废气污染治理和人居环境净化,是推动稀土催化应用的动力之一。等离子体辅助的催化技术,可以显著改善低温活性。作为长期去除污染物的有效措施,光催化技术应大力开发。开发联合脱硫脱氮的新方法、新理论、新技术及新设备,将成为烟气净化技术发展的总趋势。作为一种新型催化材料应用,掺杂稀土的ABO3钙钛矿复合氧化物以及TiO2为基础的复合氧化物,在环境净化方面的发展方向是努力降低成本,提高光催化剂活性,尽量多利用太阳光,扩大降解范围。     

Explicit stress–strain equations for modeling frictional materials

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.     

含部分晶须的钛酸锂的制备及其性能表征

L i4T i5O12是一种循环性能好、有很好的充放电平台、理论比容量较大、不与电解液反应的新型负极材料,研究探索以偏钛酸和碳酸锂为主要原料制备含部分晶须的尖晶石型晶型L i4T i5O12的一种方法。通过此工艺在1 000℃煅烧8 h后在样品中约20%的晶须出现,晶须的直径≤0.5μm,晶须的长度约为7μm。     

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.     

Engineering characteristics and uses of duricrusts in Australia

The uses and shortcomings of duricrusts (ferricrete, calcrete and silcrete) in engineering construction (as used for road‐base, aggregate, foundation materials and aquifers) are reviewed. Australian production of these materials represents about one‐third of all unprocessed road‐base and they are especially important as pavement courses for lightly trafficked, low‐cost rural and outback roads. However, duricrusts are regarded as marginal materials at best because of their typically poor grading, particle unsoundness, high fines plasticity, and absorption of water and bitumen. These materials are used because they are available locally in areas that are otherwise lacking in hard rock materials, such as deeply weathered and sedimentary rock terrains. The weathering profiles of which they form part are characterized by high permeability (despite being clay‐rich), variable cementation, low compressibility and a tendency to become weaker with depth. Although the more indurated layers are unrippable, they are also difficult to blast. Pedogenic (nodular) duricrusts were formerly sought for natural road‐base, because they occur widely and require only rudimentary processing. However, well‐cemented groundwater (vadose) duricrusts are now the preferred deposits, even though they require crushing and screening. Ferricrete is the most widely exploited of the duricrusts for engineering purposes, especially in northern and southwestern Australia, although calcrete is important in South Australia and in the Murray Basin. Silcrete is only a minor source of aggregate and road‐base, mainly in western Queensland.     

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.     

北京市北山泥石流分布规律及形成过程

北京北山泥石流的分布受构造控制，呈北东方向展布。其分布在时间上和空间上均有一定的规律可寻。一条泥石流沟谷的形成从开始到结束，概括分为形成、位移和堆积。区内泥石流的形成主要有三种形式：以水力侵蚀为主，以坡面侵蚀为主和以沟源崩、滑塌形式触发沟床物质活动而形成的泥石流。