河南桐柏围山城金银成矿带成矿物质来源: 铅同位素证据

围山城金银成矿带出露有破山银矿床、银洞坡金矿床和银洞岭银矿床等三个大型金银矿床,均受地层和构造的双重控制,赋矿地层为新元古界歪头山岩组,河前庄背斜是成矿带的主要控矿构造.围岩地层歪头山岩组的铅同位素组成具有整体富Th亏U、低μ高ω的特征,与围山城金银成矿带的矿石铅整体富Th亏U、低μ高ω的特征一致.经过年龄校正后,把成矿带内的围岩地层和岩体的全岩铅同位素样品与矿石铅同位素对比分析发现,围岩歪头山岩组与矿石关系最为接近,其次为燕山期梁湾花岗岩体.成矿带的矿石铅具有混源特征.可以认为围岩歪头山岩组和梁湾花岗岩体共同为成矿带提供了铅源及成矿物质.     

锡铁山片岩型铅锌矿床稀土元素成因标志

锡铁山(碳质)片岩型矿床具典型的"双层结构",笔者对层状矿体中硫化物、硅质岩及其围岩火山岩稀土元素分析表明,硫化物∑REE较低,在4.78×10-6～7.24×10-6之间,具明显负Eu异常,Ce异常总体不明显;硅质岩∑REE较高,在102.64×10-6～168.82×10-6之间,负Eu异常明显,Ce异常不明显;矿下中酸性火山岩的稀土元素总量普遍较高,负Eu异常明显,Ce异常不明显,矿上火山岩稀土元素组成变化较大,δEu值0.70～1.03(平均0.90),无明显Eu异常.分析认为,锡铁山(碳质)片岩型矿床是热水喷流-沉积作用的结果,成矿物质主要来自下伏火山岩及地壳深部.     

相山铀矿田西部地区深部多金属矿化成矿年代与成矿流体演化:Rb-Sr同位素体系的制约

江西相山铀矿田科学深钻3号孔在深部-700 m发现大量铅锌多金属矿化脉,垂向上呈"上铀下多金属"的分布特征。本文选取深部多金属矿脉主成矿阶段(S3)自形闪锌矿样品6件和不同阶段的毒砂、黄铁矿、方铅矿、方解石等样品12件,以及围岩全岩样品17件,进行了Rb、Sr同位素组成研究。结果表明:(1)由闪锌矿Rb-Sr等时线法确定的相山铀矿田深部多金属矿化形成于121. 0±3. 5Ma,与围岩火山岩存在较大时差,可能与晚于围岩的深部次火山有关。根据穿插关系,多金属矿化略晚于碱性交代铀矿化,但明显早于酸性交代铀矿化;(2)多金属矿化脉体中金属矿物的Rb和Sr含量分别介于0. 041×10~(-6)～1. 38×10-6和2. 35×10-6～23. 11×10-6之间,Sr同位素初始比值(87Sr/86Sr)i变化较大,介于0. 706114～0. 718814之间,平均值为0. 713579,暗示相山铀矿田深部多金属矿化的成矿物质主要来源于地壳。初始流体Sr同位素值(0. 718665)明显高于成矿时赋矿围岩(流纹英安岩为0. 714581,碎斑流纹岩为0. 714417)的Sr同位素组成,表明多金属成矿流体和物质并非来自围岩火山岩;(3)由早到晚阶段的(87Sr/86Sr)i呈明显降低的演化趋势,表明成矿流体演化过程中受到大气降水的不断稀释作用。相山矿田的铀矿和深部多金属矿化同形成于华南中生代板内伸展构造背景。     

矿物白度的影响因素与增白机理研究

白度是矿物的重要光学性质之一。为了深化矿物的光学性质及白色矿物功能材料的研究与应用,根据测试分析结果和叶大年的结构光性矿物学理论,系统研究了影响矿物白度的主要因素,以及矿物增白效果的差异性及其产生机理。研究结果表明:(1)晶体化学是决定不同种类透明矿物白度的最主要因素,但对于某种透明矿物来说,影响其白度的主要因素是矿物中的碳质有机质、含铁钛矿物杂质、杂质元素的价态与晶体化学环境、介质环境、矿物中的水和粒度大小等。(2)证明了透明矿物白度大小与折射率呈正相关。白度相同的不同矿物的增白效果存在很大差异性,其根本原因是由矿物折射率所决定的反射率存在很大差别。(3)提出了真白度和假白度的概念,即主要由自色产生的白度称为真白度,主要由假色产生的白度称为假白度;真白度高的矿物具有增白作用,而真白度低的矿物,即使粉末白度高,也没有增白作用。(4)在影响矿物白度的主要因素中,矿物中的碳质有机质、含铁钛矿物杂质、杂质元素的价态等杂质成分对矿物白度和增白效果起负面作用。(5)矿物中与晶体结构相关的水所产生的颜色属于自色,脱去结晶水、层间水和结构水都有利于提高矿物的真白度或增白效果,但脱去沸石水的效果正好相反;由矿物粒度大小变化产生的颜色属于假色;通过降低粉体粒度大小所提高的白度属于假白度,由此增加的白度没有增白作用。另外,矿物粉体与使用介质之间的折射率大小差别越大,增白效果越明显。     

Basaltic and Solution Reference Materials for Iron,Copper and Zinc Isotope Measurements

Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ⁵⁶Fe = 0.83 ± 0.07 and δ⁵⁷Fe = 1.20 ± 0.13, δ⁶⁵Cu = 0.57 ± 0.06, and δ⁶⁶Zn = ?0.79 ± 0.12 and δ⁶⁸Zn = ?1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ⁵⁶Fe = 0.15 ± 0.07, δ⁵⁷Fe = 0.22 ± 0.10, δ⁶⁵Cu = 0.12 ± 0.08, δ⁶⁶Zn = 0.17 ± 0.13, and δ⁶⁸Zn = 0.34 ± 0.26 (2s).     

Comment on: Mass Fractions of Forty‐Six Major and Trace Elements,Including Rare Earth Elements,in Sediment and Soil Reference Materials Used in Environmental Studies. Fiket et al. (2017), Geostandards and Geoanalytical Research, 41, 123–135

This paper is intended to be a constructive discussion of Fiket et al. (2017, Geostandards and Geoanalytical Research , 41 , 123–135), who dealt with the determination of major, trace and rare earth elements in several sediment and soil certified reference materials. In the present author's view, the paper by Fiket et al. (2017) suffers from a lack of reference to several publications in which somewhat similar results had already been reported. The present contribution therefore provides a comparison of previously published results with those of Fiket et al. for the CRMs soil NCS DC 77302 (GBW 07410), stream sediment NCS DC 73309 (GBW 07311), marine sediments MESS‐3 and NCS DC 75301 (GBW 07314) and estuarine sediment IAEA‐405. It is argued that this fuller consideration (a) allows critical evaluation of the quality of the results presented by Fiket et al. and (b) highlights the advantages of their work. Finally, attention is drawn to the (possible or real) problems that can arise during simultaneous determination of multiple trace elements.     

Identification of the anomaly component using BEMD combined with PCA from element concentrations in the Tengchong tin belt,SW China

Concentration of elements or element groups in a geological body is the result of multiple stages of rockforming and ore-forming geological processes.An ore-forming element group can be identified by PCA(principal component analysis)and be separated into two components using BEMD(bi-dimensional empirical mode decomposition):(1)a high background component which represents the ore-forming background developed in rocks through various geological processes favorable for mineralization(i.e.magmatism,sedimentation and/or metamorphism);(2)the anomaly component which reflects the oreforming anomaly that is overprinted on the high background component developed during mineralization.Anomaly components are used to identify ore-finding targets more effectively than ore-forming element groups.Three steps of data analytical procedures are described in this paper; firstly,the application of PCA to establish the ore-forming element group;secondly,using BEMD on the o re-forming element group to identify the anomaly components created by different types of mineralization processes; and finally,identifying ore-finding targets based on the anomaly components.This method is applied to the Tengchong tin-polymetallic belt to delineate ore-finding targets,where four targets for Sn(W)and three targets for Pb-Zn-Ag-Fe polymetallic mineralization are identified and defined as new areas for further prospecting.It is shown that BEMD combined with PCA can be applied not only in extracting the anomaly component for delineating the ore-finding target,but also in extracting the residual component for identifying its high background zone favorable for mineralization from its oreforming element group.     

Study on wetting deformation characteristics of coarse granular materials and its simulation in core-wall rockfill dams

The wetting deformation of coarse granular materials is often considered to be an important cause of the core wall rockfill dam cracks during impounding. By analyzing existing research results, this paper proposes a hyperbolic relationship between the wetting axial strain and wetting stress level and puts forwards a warped surface relationship among spherical stress, shear stress, and the ratio of wetting volumetric strain to wetting axial strain. To illustrate its practicability, the wetting strain model's parameter determination process is introduced and the rockfill materials wetting parameters are determined using the triaxial wetting test data. Moreover, the collapse settlement of Guanyinyan rockfill dam during first impounding is numerically simulated using the proposed method to calculate rockfill wetting deformation and verified by field measurements and monitoring data. The results show that the calculative method of wetting deformation proposed in this paper is reasonable and practical; the wetting deformation of upstream rockfill materials would cause an adverse deformation trend, which may lead to crack occurrence at the upstream slope and dam crest; and the Guanyinyan rockfill dam cracks on the top of junction mainly caused by the wetting deformation of upstream rockfill.     

3种水稻土时间序列黏粒矿物的组合特征与物源指示意义

对南方丘陵区3种不同母质水稻土时间序列黏粒矿物的X-射线衍射（XRD）进行分析发现：① 紫色砂页岩（PS）母质起源土壤的黏粒矿物以高岭石类似矿物为主;第四纪红黏土（RC）母质起源土壤的黏粒矿物以高岭石类似矿物、伊利石类似矿物与三羟铝石为主;红砂岩（RS）母质起源土壤的黏粒矿物以1.4 nm过渡矿物、高岭石类似矿物与三羟铝石为主。② 这3种母质土壤种稻后黏粒矿物的变化大体可分为2种情况。RC与RS母质的起源土壤种稻后,土壤黏粒矿物的变化相对较小,伊利石类似矿物相对含量有所增加,这可能主要与钾肥的持续施用有关。PS母质的起源土壤种稻后,土壤黏粒矿物变化相对较大,表现为高岭石类似矿物相对含量降低,低结晶度的伊利石或次生绿泥石与三羟铝石相对含量上升。PS母质发育的土壤种稻后脱钾明显且主要集中在原生矿物部分。这种原生矿物的脱钾作用对土壤黏粒含量和黏粒矿物的类型都有较大影响。③ 起源土壤的黏粒矿物通常会被水稻土所继承,并在水稻土发育过程中相对稳定,可以用其来指示起源土壤（或母质）的物源组分。     

聚能爆破在石材切割应用中的试验研究

摘 要 简单分析了聚能爆破装药在孔内爆破的力学效应‚阐明了聚能爆破对岩石定向破裂 的控制机理。在聚能爆破切割石材过程中‚聚能射流起到前期切割出定向裂缝的作用‚石材 的最终开裂由后期爆破产生的气体的准静态胀楔作用来完成。通过提高炸药爆速、增大装药 密度等方法可以提高聚能装药爆炸后形成射流的能量和改善聚能爆破切割石材的效果。