Fluid salinities obtained by infrared microthermometry of opaque minerals: Implications for ore deposit modeling — A note of caution

Infrared microthermometry of opaque minerals has revealed that temperatures of phase changes vary with the infrared light source intensity, resulting in an overestimate of fluid salinities and an underestimate of homogenization temperatures. Failing to recognize this analytical artifact during infrared microthermometry may result in meaningless geological models. A fluid inclusion investigation on enargite from a high-sulfidation epithermal deposit is used as an example to document this. Fluid salinities obtained during an early investigation ranged between 6.3 and 20.4 wt.% NaCl, which were interpreted as intense boiling or as evidence for the involvement of a magmatic brine during ore formation. Fluid inclusion salinities obtained with improved analytical settings, i.e. low light intensities, fall between 1.1 and 1.7 wt.% NaCl and are in better agreement with fluid salinities obtained in quartz from similar deposits, and recent modeling suggesting vapor transport of Au and Cu from deep porphyry-Cu environments to shallower high-sulfidation epithermal deposits.     

Heavy metal contents in soil of major towns in the east coast of Peninsular Malaysia

A total of 63 soil samples from 3 different soil profiles （urban, suburban and industrial areas） in major towns in the east coast of Peninsular Malaysia were analyzed for the total concentrations of Cu, Zn, Pb, Ni and Cr. The soil samples were subjected to acid digestion and the concentrations of total metals extracted were measured or flame atomic absorption spectrometry and inductively coupled plasma - atomic emission spectrometry. According to the result of this study, Pb and Zn concentrations in urban soils are much higher than those of industrial and suburban soils. Total concentrations of Cu and Cr in industrial soil samples are high compared to other two soil profiles and Ni concentrations in the suburban area are slightly higher those of urban and industrial soils. Since Malaysia has not yet to come up with her own soil maximum allowable limit, the heavy metal concentrations were compared with the Dutch maximum allowable limit. The results indicated that the median of heavy metals values in the three different soil profiles is still below the Dutch system limit. From the maximum allowable value obtained from the Dutch system, a contamination/pollution （C/p） index for each site was calculated for the set of these five heavy metals. An advantage of using this method is to make a differentiation between pollution （C/p〉1） and contamination （C/p〈1） status in soils as well as being able to characterize each status into 5 different categories （slight, moderate, severe, very severe and excessive）.     

Changes in manganese and lead in the environment and young children associated with the introduction of MMT in gasoline

This is a 4-year longitudinal study to evaluate changes to the environment and exposure of young children associated with the introduction of methylcyclopentadienyl manganese tricarbonyl （MMT） into Australia in 2000. The cohort includes 57 females and 56 males; age range of 0.29 to 3.9 years. Samples are collected every 6 months from children in residences located at varying distances from major traffic thoroughfares in Sydney. Environmental samples： air, house and day care dustfall, soil, dust sweepings and gasoline. Samples from children： blood, urine, handwipes prior to and after playing outdoors, and a 6-day duplicate diet. All samples are analyzed for a suite of 20 elements using ICP-MS. Results are presented for the first three 6-month sampling periods for Pb and Mn. For dustfall accumulation, there was no significant change over the 3 sampling periods （time） for Pb or Mn, and a positive relationship between ‘traffic exposure＇ （traffic volume and proximity to the road） and Pb but not Mn. For handwipes, Pb and Mn in wipes taken from children after playing outdoors were usually significantly greater than for wipes taken prior to playing. There was no significant association between Pb or Mn in handwipes with traffic exposure. Dustfall accumulation was a significant predictor for Pb in the handwipes, and dust sweepings were a significant predictor of Mn in handwipes.     

Analysis of the effect of geology, soil properties, and land use on groundwater quality using multivariate statistical and GIS methods

The regional survey of groundwater used as a small water supply system was performed to know the effect of geology, soil properties and land use on groundwater quality at Nonsan City, Korea. A total of 126 groundwater samples were collected and analyzed at the study area. The multivariate statistical methods, principal components analysis and discriminant analysis, and GIS technique were used for the quantitative interpretation of groundwater quality. The study area is mainly composed of Precambrian gneiss, Jurassic granite, and Cretaceous volcanics, and metasedimentary rocks of the Ogcheon zone. The land use was grouped as paddy, upland, grassland, resident, point source, industrial area, and water system. The soil properties were classified as 4 major groups, Entisols, Alfisols, Inceptisols, and Ultisols, by the degree of development, and reclassified as 11 subgroups. The modified and simplified geologic map, soil map, and land use map were made by using ARCGIS soft-ware. The area of geology, soil property, and land use affecting the groundwater quality for each well were also calculated by ARCGIS soft-ware to acquire the quantitative parameters for multivariate statistical analysis. The monitoring results of groundwater in the study area showed that 13%-21% of the groundwater samples exceeded the portable water guideline and the main causes were turbidity, bacteria, arsenic and nitrate-N. The spatial distribution of each component showed the close relationship between groundwater quality and geology reflecting the topography, land use.     

GGR Critical Review of Analytical Developments in 2004–2005

In 2005 Geostandards and Geoanalytical Research embarked upon a new initiative for its readers. Key researchers in various fields of geoanalytical technique development and their application were identified and invited to provide reviews pertinent to their expertise. As noted in the first of these publications "…instead of revisiting the historical context or decades of development in each analytical technique, the goal here has been to capture a snapshot of "hot topics" across a range of fields as represented in the… literature" (Hergt et al . 2005). Rather than prepare an annual review, a decision was taken earlier this year to provide a biennial summary of progress and accomplishments, in this case for the years 2004–2005. The principal techniques employed in Earth and environmental sciences are covered here, and include laser ablation and multicollector ICP-MS, ICP-AES, thermal ionisation and secondary ion mass spectrometry, as well as neutron activation analysis, X-ray fluorescence and atomic absorption spectrometry. A comprehensive review of the development of reference materials, often essential to these techniques, is also provided. The contributions assembled serve both to keep readers informed of advances they may be unfamiliar with, but also as a means of showcasing examples of the breadth and depth of work being conducted in these fields.     

Reference Materials in Geoanalytical Research -Review for 2004 and 2005

This review gives an overview of the use and development of reference materials of geochemical and environmental interest in the literature of the years 2004 and 2005. In these years the performance of existing methods has been improved and new geochemical applications using new techniques have been developed. Accordingly, there was an increasing need for new reference materials, especially for in situ microanalysis and for precise stable isotope measurements. In addition, there was a notable trend for further characterisation of existing reference materials, mainly for the platinum-group elements. This review focuses on five topics: reference materials for platinum-group elements, reference glasses for in situ microanalysis, zircon reference materials, isotopic reference materials, and the development and certification of reference materials.     

城市化过程中土地征用风险表征及对策

从土地征用基本概念和基本特征着手，描述了土地征用的主要风险，其表现为土地征用权力滥用、侵害失地农民的权益、诱发集体土地黑市、诱发社会矛盾等方面。分析了产生风险的“公共利益需要”缺乏明确界定、土地征用的补偿标准偏低或滞后、土地征用及相关制度不健全或存在缺陷等主要原因。提出了控制与规避风险的对策与措施：严格限定公益性用地范围，提高征地补偿标准，扩大补偿范围，完善相关制度，严格土地征用程序。     

Factors controlling the spatial and temporal variability of dust emissions

New field measurement techniques are allowing researchers to better understand how surficial properties affect the temporal and spatial variability of dust emissions. In this paper we review the current understanding of the dust emission process and present new field measurements that examine how three surface properties： roughness, crust strength, and temporal changes of surface properties affect dust emissions. These data were collected using three unique measurement systems developed by our team. Roughness exerts considerable control on the entrainment threshold and emissions of dust from a surface. We have carried out a series of experiments designed to quantify roughness effects on aeolian sediment entrainment and transport in a shear stress partitioning framework. Our results show that the model of Raupach et al. （1993） provides very good agreement with available data to predict the amount of shearing stress on the intervening surface among roughness elements, relatively independent of their size and distribution. However, element size affects the aeolian sediment transport process beyond that attributable only to the reduction of surface shear stress caused by the roughness. Additional interactions of the elements with the saltation cloud appear to reduce the transport efficiency and potentially dust emissions as well. The effect of crust strength on dust emissions was assessed using a newly-developed pin penetrometer, which can measure crust strength in-situ. Previous researchers suggested that variation in crust strength even within a small area could lead to considerable spatial variability in dust emissions. Our measurements showed that crust strength is highly variable over a scale of centimeters. This variability may help to explain some of the observed scatter in field measurements of dust emissions for what appear to be homogeneous surfaces. Variability of dust emissions in time and space was also evaluated using a new instrument, the Portable In-Situ Wind Erosion Lab （PI-SWERL） developed to measure dust emissions from soil surfaces.     

Total gaseous mercury emissions from mercury-enriched soil in Guizhou, China

Guizhou is located in the Circum-Pacific Global Mercuriferous Belt, and mercury concentrations in soil in this area are enriched. In-situ total gaseous mercury （TGM） exchange fluxes between air and soil surface were intensively measured at four sampling sites in Guiyang from 21 May to 16 June, 2003, and five sites in the Lanmuchang mercury mining area in December 2002 and May 2003, respectively. The in-situ Hg flux measurement was conducted with a dynamic flux chamber （DFC） of quartz. Overall, net emissions were obtained from all sampling sites. Soil mercury concentration and solar radiation have been proved to be the two most important parameters to control mercury emissions from soil. Meanwhile, rain events can enhance mercury emission rate significantly.     

Origin and three-dimensional fluorescence spectrum of the chromophoric dissolved organic matter in Yangtze estuary, East China

Dissolved organic matter （DOM） is an important chemical component in natural water. Chromophoric dissolved organic matter （CDOM）, a fraction of optical properties, plays art important role in the biogeochemical cycle of nutrients in aquatic environment. People realized that DOM cycle is crucial in the global carbon and nitrogen flux, and also is inherently related to nutrients and trace metal elements. Therefore, CDOM was concerned by scientists in global oceanography and limnology fields. Water samples were collected from three sections （North Channel, South Channel and Zhuyuan） of the Yangtze （Changjiang River） estuary in March 2006 Three-dimensional excitation emission matrix （3-DEEM） fluorescence spectra were analyzed for those filtrates through Whatman GF/F filters. Dissolved organic carbon （DOC） was also measured by TOC analyzer. The tidal variety was also taken into account. The 3-D EEM fluorescence scans suggested the fluorescence characteristics of humic acid （Ex=332-344 nm, Em=439-451 nm） and fulvic acid （Ex=250-254 nm, Em=472-478 nm） were obvious, and the fluorescence group of protein-like and tyrosine （Ex=230 nm, Em=283 nm） was also found. They are mainly composed of CDOM in the Yangtze estuary. Further data analysis, especially the fluorescence index （f 450/500）, showed that terrestrial signal was rather strong （1.41-1.65） in the surface water, however, some terrestrial CDOM signals of bottom water showed excursions （1.28-1.39）. On the other hand, anthropogenic sign was impressed in the waters of Zhuyuan, which is one of the main drain outlets of Shanghai Metropolis. DOC concentrations ranged from 2.2 mg/L to 3.4 mg/L in Zhuyuan and South Channel, and from 2.0 mg/L to 2.4 mg/L in North Channel. The tide effect played a role in the composition of the CDOM measured by 3-D fluorescence scan technology.