The stable isotope signature of kilometre-scale fracturedominated metamorphic fluid pathways, Mary Kathleen, Australia

Abstract Large calcite veins and pods in the Proterozoic Corella Formation of the Mount Isa Inlier provide evidence for kilometre-scale fluid transport during amphibolite facies metamorphism. These 10- to 100-m-scale podiform veins and their surrounding alteration zones have similar oxygen and carbon isotopic ratios throughout the 200 × 10-km Mary Kathleen Fold Belt, despite the isotopic heterogeneity of the surrounding wallrocks. The fluids that formed the pods and veins were not in isotopic equilibrium with the immediately adjacent rocks. The pods have δ¹³C_calcite values of –2 to –7% and δ¹⁸O_calcite values of 10.5 to 12.5%. Away from the pods, metadolerite wallrocks have δ¹⁸O_whole-rock values of 3.5 to 7%. and unaltered banded calc-silicate and marble wallrocks have δ¹³C_calcite of –1.6 to –0.6%, and δ¹⁸O_calcite of 18 to 21%. In the alteration zones adjacent to the pods, the δ¹⁸O values of both metadolerite and calc-silicate rocks approach those of the pods. Large calcite pods hosted entirely in calc-silicates show little difference in isotopic composition from pods hosted entirely in metadolerite. Thus, 100- to 500-m-scale isotopic exchange with the surrounding metadolerites and calc-silicates does not explain the observation that the δ¹⁸O values of the pods are intermediate between these two rock types. Pods hosted in felsic metavolcanics and metasiltstones are also isotopically indistinguishable from those hosted in the dominant metadolerites and calc-silicates. These data suggest the veins are the product of infiltration of isotopically homogeneous fluids that were not derived from within the Corella Formation at the presently exposed crustal level, although some of the spread in the data may be due to a relatively small contribution from devolatilization reactions in the calc-silicates, or thermal fluctuations attending deformation and metamorphism. The overall L-shaped trend of the data on plots of δ¹³C vs. δ¹⁸O is most consistent with mixing of large volumes of externally derived fluids with small volumes of locally derived fluid produced by devolatilization of calc-silicate rocks. Localization of the vein systems in dilatant sites around metadolerite/calc-silicate boundaries indicates a strong structural control on fluid flow, and the stable isotope data suggest fluid migration must have occurred at scales greater than at least 1 km. The ultimate source for the external fluid is uncertain, but is probably fluid released from crystallizing melts derived from the lower crust or upper mantle. Intrusion of magmas below the exposed crustal level would also explain the high geothermal gradient calculated for the regional metamorphism.     

Fluid infiltration during contact metamorphism of interbedded marble and calc-silicate hornfels, Twin Lakes area, central Sierra Nevada, California

Abstract In the Twin Lakes area, central Sierra Nevada, California, most contact metamorphosed marbles contain calcite + dolomite + forsterite ± diopside ± phlogopite ± tremolite, and most calc-silicate hornfelses contain calcite + diopside + wollastonite + quartz ± anorthite ± K-feldspar ± grossular ± titanite. Mineral-fluid equilibria involving calcite + dolomite + tremolite + diopside + forsterite in two marble samples and wollastonite + anorthite + quartz + grossular in three hornfels samples record P± 3 kbar and T± 630° C. Various isobaric univariant assemblages record CO₂-H₂O fluid compositions of χCO₂= 0.61–0.74 in the marbles and χCO₂= 0.11 in the hornfelses. Assuming a siliceous dolomitic limestone protolith consisting of dolomite + quartz ° Calcite ± K-feldspar ± muscovite ± rutile, all plausible prograde reaction pathways were deduced for marble and hornfels on isobaric T-XCO₂ diagrams in the model system K₂O-CaO-MgO-Al₂O₃-SiO₂-H₂O-CO₂. Progress of the prograde reactions was estimated from measured modes and mass-balance calculations. Time-integrated fluxes of reactive fluid which infiltrated samples were computed for a temperature gradient of 150 °C/km along the fluid flow path, calculated fluid compositions, and estimated reaction progress using the mass-continuity equation. Marbles and hornfelses record values in the range 0.1–3.6 × 10⁴ cm³/cm² and 4.8–12.9 × 10⁴ cm³/cm², respectively. For an estimated duration of metamorphism of 10⁵ years, average in situ metamorphic rock permeabilities, calculated from Darcy's Law, are 0.1–8 × 10^?6 D in the marbles and 10–27 × 10^?6 D in the hornfelses. Reactive metamorphic fluids flowed up-temperature, and were preferentially channellized in hornfelses relative to the marbles. These results appear to give a general characterization of hydrothermal activity during contact metamorphism of small pendants and screens (dimensions ± 1 km or less) associated with emplacement of the Sierra Nevada batholith.     

安徽铜陵矿集区海底喷流沉积体系的流体包裹体微量元素对比

铜陵矿集区与铜-金(多金属)矿床有关的热液活动主要有两大体系。即与海西期海底喷流沉积有关的热液体系和与矽卡岩矿化有关的燕山期岩浆热液体系。查明这两类热液体系的流体包裹体特征对区域找矿和矿床成因研究都有实际意义。在包裹体岩相学研究基础上，应用ICP-MS技术和热爆提取方法，研究了新桥、冬瓜山、峙门口、铜官山、朝山等矿床具代表性的热液石英中流体包裹体的微量元素、稀土元素特征。结果表明，两类热液体系在流体包裹体特征上有较大的区别，在流体的微量元素和稀土元素特征方面也很不相同。海底喷流沉积体系的热液石英中流体包裹体与岩浆热液体系的相比。稀土总量较高，LREE／HREE比值较大，δEu不明显。且Mo／(W Sn)比值较高，反映流体中成矿物质的深源特征；Ga／T1、Rb／Cs大。Zr／Hf低，也不同于岩浆热液体系。     

南秦岭十里坪锑矿床成矿时代及成因的初步研究

十里坪锑矿床受赵川陆缘隆_滑构造的主滑脱拆离带的控制。矿体呈脉状赋存于韧_脆性主滑脱带上部的脆性次级断层_节理中,矿石类型主要为萤石石英辉锑矿型。围岩为太古宙_元古宙变质岩系,围岩蚀变弱。成矿流体属H2O_CO2_NaCl体系,流体包裹体盐度w(NaCleq)为3.6%～11.3%,均一温度为109～232℃,形成压力大致为800×105Pa。硫、铅同位素研究表明,矿质主要来源于变火山岩围岩;氢、氧同位素显示,成矿流体以大气降水为主,初步将该矿床定为变质岩源就地式大气降水热液矿床。矿石中萤石Sm_Nd等时线年龄为(392±24)Ma,与南秦岭北部晚古生代拗陷区热水喷流_沉积成矿时代相一致,它们都形成于秦岭微板块泥盆纪非造山裂解阶段。     

云南会泽超大型铅锌矿床成因研究中的几个问题

位于川-滇-黔铅锌多金属成矿域中南部云南会泽超大型铅锌矿床可能是一种新的铅锌矿床类型，该类铅锌矿床明显特征是规模大、品位富、伴生有用元素多，暗示其成矿环境较为特殊。从成矿时代、成矿物质来源、成矿流体来源与演化，以及峨眉山玄武岩与成矿的关系等方面分析了会泽超大型铅锌矿床的研究进展及国内外研究现状，认为矿床成矿时代与西南大面积峨眉山玄武岩成矿时代相近，成矿物质和成矿流体具有“多源性”，成矿流体存在均一化过程，区域大规模流体运移在该区铅锌成矿过程中具有重要意义，峨眉山玄武岩岩浆活动与铅锌成矿具有密切的成因联系，矿床可能为“均一化成矿流体贯入成矿”的产物。     

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.     

青海东昆仑哈陇休玛钼多金属矿床成矿流体特征及成矿模式

哈陇休玛钼多金属矿床是东昆仑成矿带东段目前仅有的中型斑岩型矿床。为了查明其成矿流体性质及成矿物质来源,构建矿床成矿模式,本文进行了详细的流体包裹体和H-O-S同位素研究。流体包裹体显微测温显示,哈陇休玛矿床发育气液两相和含CO₂三相两种类型包裹体,成矿流体呈现中高温(集中于280～340℃)、高盐度(w(NaCl),集中于6.00%～18.00%)和中等密度(集中于0.64～0.92 g/cm³)特点,成矿深度为2.4～4.1 km,形成于中浅成环境。H-O同位素显示,成矿流体具有岩浆水和大气降水混合的特征,但主体以岩浆水为主;S同位素显示,成矿物质主要来自于深部岩浆。结合区域构造演化认为,哈陇休玛矿床成矿模式为印支晚期东昆仑地区发生强烈壳幔混合作用,形成富含成矿元素的混合岩浆,含矿流体在随混合岩浆上升的过程中发生流体沸腾,并与大气降水混合冷却,导致成矿物理化学条件发生变化,促使成矿物质沉淀成矿。     

内蒙古东乌珠穆沁旗舒哈迪铅锌多金属矿成矿特征

舒哈迪铅锌多金属矿床赋存在发育于奥陶系中统多宝山组细碧岩、石英角斑岩岩系中的断裂构造蚀变带内,矿体呈脉状、透镜状,受舒哈迪背斜构造及其伴生的断裂构造控制,铅锌矿石成分简单,伴生有银和铜.围岩蚀变主要为黄铁矿化、硅化、绿泥石化、绿帘石化、绢云母化和碳酸盐化,具有不明显的分带性.成矿物质来源于奥陶系中统多宝山组变质岩系,成矿热液来源于隐伏的岩浆侵入体,矿床成因属于岩浆热液充填（脉）型铅锌多金属矿床,矿床形成时代为燕山早-中期.     

煤层气井流体原位实时监测仪

煤层气生产过程中,需要随时了解和掌握煤层气井的产水、产气、液面高度等各项参数,以便根据生产阶段的需要及时调整生产参数,使煤层气井的生产处于最佳状态。目前国内煤层气抽采过程中仅能单独测量压力、温度、液位等参数,并不能检测每个层位的产气产水量,因此为了达到长期同时监测不同层位煤层的目的,设计了煤层气井流体原位实时监测仪。该监测仪不仅能测量温度、压力等参数,还可结合地面测得的气、水流量,分别得出不同层位煤层的产气产水量,为煤层气开采方法的确定提供科学依据,有利于提高煤层气抽采率。