海洋浮游微食物网结构及其影响因素

微食物环是海洋生态系统中重要的物质和能量过程,是传统食物链的有效补充。微食物环研究是当前海洋生态学研究的热点之一,但对其结构的系统研究较少,海洋微食物网结构在2000年才被Garrison提出。尽管微食物网各个类群的丰度在不同海洋环境中有相对变化,但是这些变化都处于一定的范围之内,其丰度结构约为纤毛虫10 cell ml-1、鞭毛虫103 cell ml-1、微微型真核浮游生物104 cell ml-1、蓝细菌104-5 cell ml-1、异养细菌106 cell ml-1、病毒107 particle ml-1。海洋浮游食物链中捕食者和饵料生物粒径的最佳比值为10:1,实际研究中该比值会略低,例如纤毛虫与其饵料的粒径比值为8:1,鞭毛虫为3:1。Pico和Nano浮游植物的丰度比（Pico:Nano）是研究微食物网结构的指数之一,该指数具有不受研究尺度影响的优点,可用于研究区域性和全球性微食物网结构。近年来,学者们从多角度对海洋微食物网的结构开展了研究,不同海区微食物网各类群丰度、生物量的时间和空间变化研究有很多报道,微食物网的结构可受空间、季节、摄食、营养盐等多种因素影响。在对不同空间微食物网的研究中,学者往往研究不同物理性质的水团中各类群生物丰度的不同,以此来表征微食物网结构的不同;同一海区微食物网结构的季节变化也是使用各个类群丰度和生物量的变化来表示,该变化主要受水文环境因素影响。摄食者对微食物网各类生物的影响通过三种途径：1. 中型浮游动物摄食;2. 中型浮游动物摄食微型浮游动物,通过营养级级联效应影响低营养级生物;3. 中型浮游动物通过释放溶解有机物、营养盐影响细菌和低营养级生物。浮游植物通过产生化感物质和溶解有机物影响微食物网结构,而营养盐的浓度及变化则可以对微食物网产生直接或间接影响。     

The evolution of the Huangling uplift and its control on the accumulation and preservation of shale gas

There are plenty of Sinian and Cambrian potential shale gas resources in South China, which is characterized by high thermal evolution degrees, poor drilling performances and only occurs in local areas. Taking the principle “high to find low” is the key issue to achieving a breakthrough in older shale. China Geological Survey drilled in the periphery of the Proterozoic basement, i.e. the Huangling anticline, in the western Hubei, and Hannan paleocontinent in the southern Shanxi. It received high-quality gas-bearing shale with relatively low Ro in the in Lower Cambrian Niutitang formation and Sinian Doushantuo formation. Based on geological conditions of shale gas reservoirs in the Huangling anticline, this paper puts forward the new model named “Control over reservoirs by periphery of basement” about shale gas accumulation, suggesting that the shale deposited in a deepwater continental shelf in the periphery of the basement is characterized by shallow burial, a short burial time, stable tectonics, relatively low thermal evolution degrees, and shale gas reservoirs in a good condition. The shale of the Sinian-Cambrian strata deposited in deepwater continental shelves in the periphery of Chuanzhong paleo-uplift in Sichuan, Hannan paleocontinent in the southern Shanxi, Huangling anticline in western Hubei and Jiangnang-Xuefeng paleo-uplift in Hunan and Guizhou province have good shale gas exploration potential.     

卷积神经网络及其在矿床找矿预测中的应用——以安徽省兆吉口铅锌矿床为例

大数据人工智能地质学刚刚起步,基于大数据智能算法的地质研究是非常有意义的探索性实验。利用大数据和机器学习解决矿产预测问题,有助于人们克服不能全面考虑地质变量的困难及评估当前模型在已有数据中的可靠性。元素地表分布特征量主要受原岩成分、成矿作用影响和地表过程的影响,它们携带某些指示矿体就位的信息,即矿体在地下空间就位时在地表的响应,且未在地表过程中消失。以往的地球化学勘查工作仅仅识别异常,但未能发现矿体在地表响应的成矿特征量。本文以安徽省兆吉口铅锌矿床为例,通过机器学习,利用卷积神经网络算法,不断挖掘元素Pb分布特征与矿体地下就位空间的耦合相关性。经过1000次训练后,可以得到准确率0. 93,损失率0. 28的卷积神经网络模型。这种神经网络模型就是矿体在地下就位时元素在地表分布的响应,可以用来进行矿产资源预测。应用该模型对未知区进行预测,结果显示第53号区域具有很大概率存在尚未发现的矿体。     

新疆西昆仑奥尔托喀讷什锰矿地质、地球化学及成因

近年来,西昆仑玛尔坎苏地区富锰矿找矿取得重大突破,新发现奥尔托喀纳什等大型锰矿床。该矿床层位稳定,厚度较大,Mn平均品位达35%以上,为中国最富的碳酸锰矿床,属于典型的海相沉积型锰矿床。锰矿体主要赋存于晚石炭世喀拉阿特河组地层中,该组岩性为一套浅海碳酸盐岩台地相沉积建造组合,可划分为台内浅滩、潮坪、开阔台地、局限台地等4个相类型。成矿分为三个期次,第一期为沉积成岩成矿期,矿石矿物由菱锰矿、锰方解石、硼锰矿组成;第二期为热液改造期,形成锰镁绿泥石、红锰矿、硫锰矿、锰方解石(脉)、重结晶菱锰矿、蔷薇辉石及滑石、石膏等;第三期为表生氧化期,发育少量软锰矿、水锰矿、硬锰矿等。锰矿石具有较低的Fe/Mn比值、V/(V+Ni)比值和强烈的Ce正异常,表明Mn是在氧化环境下,以氧化物或氢氧化物的形式沉积富集。含锰岩系顶、底板岩石中含较多成熟度较差的中酸性火山岩岩屑,以及具有较低Al/(Al+Fe+Mn)、Y/Ho、Co/Ni比值的锰矿石,说明其成矿物质来源于海底热水活动。奥尔托喀纳什锰矿具有"内源外生"的特点,锰矿石及菱锰矿具有负的δ~(13)C值(-23.3‰～-13.2‰),表明锰矿经历了先成锰氧化物或氢氧化物、再被还原转化成菱锰矿的过程。此外,有机质所导致的更为强烈的还原作用是本矿床富锰矿形成的重要机制。后期构造叠加致使矿体发生变形,矿体形态受褶皱控制。矿石受到强烈改造,形成锰镁绿泥石、红锰矿、蔷薇辉石等,晚期经历氧化淋滤作用形成软锰矿、水锰矿等。     

云南鹤庆县小天井锰矿地质特征及找矿标志

云南鹤庆县小天井锰矿矿体呈层状、似层状,局部透镜状赋存于上三叠统松桂组第三段(T3sh3)灰岩、钙质泥岩中,矿体产状与围岩一致.矿体顶板的硅钙质层是该矿的直接找矿标志.矿床成因属沉积-改造型锰矿.     

Research achievements of the Qinghai-Tibet Plateau based on 60 years of aeromagnetic surveys

The Qinghai-Tibet Plateau (also referred to as the Plateau) has long received much attention from the community of geoscience due to its unique geographical location and rich mineral resources. This paper reviews the aeromagnetic surveys in the Plateau in the past 60 years and summarizes relevant research achievements, which mainly include the followings. (1) The boundaries between the Plateau and its surrounding regions have been clarified. In detail, its western boundary is restricted by West Kunlun-Altyn Tagh arc-shaped magnetic anomaly zone forming due to the arc-shaped connection of the Altyn Tagh and Kangxiwa faults and its eastern boundary consists of the boundaries among different magnetic fields along the Longnan (Wudu)-Kangding Fault. Meanwhile, the fault on the northern margin of the Northern Qilian Mountains serves as its northern boundary. (2) The Plateau is mainly composed of four orogens that were stitched together, namely East Kunlun-Qilian, Hoh-Xil-Songpan, Chamdo-Southwestern Sanjiang (Nujiang, Lancang, and Jinsha rivers in southeastern China), and Gangdese-Himalaya orogens. (3) The basement of the Plateau is dominated by weakly magnetic Proterozoic metamorphic rocks and lacks strongly magnetic Archean crystalline basement of stable continents such as the Tarim and Sichuan blocks. Therefore, it exhibits the characteristics of unstable orogenic basement. (4) The Yarlung-Zangbo suture zone forming due to continent-continent collisions since the Cenozoic shows double aeromagnetic anomaly zones. Therefore, it can be inferred that the Yarlung-Zangbo suture zone formed from the Indian Plate subducting towards and colliding with the Eurasian Plate twice. (5) A huge negative aeromagnetic anomaly in nearly SN trending has been discovered in the middle part of the Plateau, indicating a giant deep thermal-tectonic zone. (6) A dual-layer magnetic structure has been revealed in the Plateau. It consists of shallow magnetic anomaly zones in nearly EW and NW trending and deep magnetic anomaly zones in nearly SN trending. They overlap vertically and cross horizontally, showing the flyover-type geological structure of the Plateau. (7) A group of NW-trending faults occur in eastern Tibet, which is intersected rather than connected by the nearly EW trending that develop in middle-west Tibet. (8) As for the central uplift zone that occurs through the Qiangtang Basin, its metamorphic basement tends to gradually descend from west to east, showing the form of steps. The Qiangtang Basin is divided into the northern and southern part by the central uplift zone in it. The basement in the Qiangtang Basin is deep in the north and west and shallow in the south and west. The basement in the northern Qiangtang Basin is deep and relatively stable and thus is more favorable for the generation and preservation of oil and gas. Up to now, 19 favorable tectonic regions of oil and gas have been determined in the Qiangtang Basin. (9) A total of 21 prospecting areas of mineral resources have been delineated and thousands of ore-bearing (or mineralization) anomalies have been discovered. Additionally, the formation and uplift mechanism of the Plateau are briefly discussed in this paper.©2021 China Geology Editorial Office.     

师宗县高良码头公路西侧古滑坡成因与防治措施

云南师宗县高良码头公路西侧古滑坡为一中型推移式土质滑坡,滑坡体规模30.8万m3.该古滑坡曾造成南盘江短期堵塞,之后古滑坡堆积体处在临界稳定状态.由于修建的省道S207公路从滑坡下部通过,古滑坡堆积体开始蠕动,2013年8月滑坡堆积体加剧蠕动变形,后缘弧状拉张裂缝及错台变形强烈.通过多次实地调查,激发古滑坡堆积体蠕动因...     

云南红河县龙然村滑坡成因分析及治理方案

云南红河县龙然村滑坡为—浅层牵引式破碎松散层滑坡,连续的降雨是诱发滑坡的主要因素.该滑坡的治理应采用“挡+排”的综合治理,“档”即在滑坡上缘设置抗滑桩、档板和毛石混凝土挡墙;“排”即沿滑坡顶、滑坡体两侧分别设置截水和排水沟,将地表水及雨水排出滑坡体外,以保证该滑坡体的稳定.     

基于机理的合成孔径雷达系统成像误差理论分析

目前在遥感和GIS中,关于误差和不确定性研究的主要方法有两种: 概率统计和机理模拟。本文论述了二者的特点,详细讨论了影响合成孔径雷达成像的诸多因素,提出利用机理的方法分析SAR系统成像误差。本方法是从合成孔径雷达成像机理的研究出发,利用控制论的观点来解释、分析影响合成孔径雷达成像的诸多误差因素并建立误差传播模型。这不仅对研制合成孔径雷达的设计具有指导意义,而且对遥感数据的质量控制也有重要意义。     

Wave tank and bench-top control testing of a wave energy converter

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.