Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

非开挖导向钻进实际轨迹的控制设计

非开挖导向钻进技术，具有施工速度快、适用范围广等优点，得到了广泛的应用。在实际钻进中，由于钻进在地下的不确定性，影响了导向钻进的顺利进行。到得钻进中当前点的顶角、方位角和孔深，通过均角全距法原理，可以近似地描绘出当前钻孔的空间实际轨迹，并确定钻头的位置。应用这一原理，同时运用VisualBasic语言和AutoCAD绘图工具相结合的方法，编制一套应用程序，可以直接绘制出当前钻孔轨迹，并可实现对钻孔轨迹的调控，从而保证导向钻进的顺利进行。     

Current controlled sediment deposition from the shelf to the deep ocean: the cenozoic evolution of circulation through the SW pacific gateway

 The circulation of cold, deep water is one of the controlling factors of the Earth's climate. Forty percent of this water enters the world ocean through the Southwest Pacific as a deep western boundary current (DWBC) flowing northwards at bathyal to abyssal depths, east of the New Zealand microcontinent. South of latitude 50°S, the DWBC is intimately linked with the Antarctic circumpolar current (ACC), which is the prominent force for the shallow-water circulation. The Pacific DWBC is presently the largest single contributor of deep ocean water, and deciphering its evolution is of fundamental importance to understanding ocean and climate history, and global ocean hydrography. The evolution of the DWBC system, and of related circum-Antarctic currents, has taken place since 30–25 Ma when plate movements created the first oceanic gaps south of Australia and South America. The stratigraphic record preserved in sediment drifts of the Southwest Pacific, in eastern New Zealand, is the best available for deciphering the Neogene history of Southern Ocean water masses, and of the circulation of the ACC, DWBC and their precursor systems. Major current activity commenced on the New Zealand margin in the late Eocene or early Oligocene (Hoiho Drift; early ACC) and was widespread by the mid-late Oligocene (Marshall Paraconformity and Weka Pass Limestone drift; ACC). During the Neogene the eastern South Island continental shelf built seawards by accretion at its outer edge of large Miocene current drifts up to tens of kilometres long and hundreds of metres thick (Canterbury drifts). Also commencing in the mid-Cenozoic, but in depths >2000 m, the DWBC emplaced large deep-water sediment drifts. Rates of drift deposition accelerated considerably in the late Neogene, when climatic change (and particularly glacial sea-level falls) caused the delivery of large volumes of turbiditic sediment into the path of the DWBC via the Bounty and Hikurangi channels. Received: 9 August 1995 / Accepted: 15 January 1996     

REE and (э)Nd of clay fractions in sediments from the eastern Pacific Ocean: Evidence for clay sources

Clay fractions in the non-calcareous surface sediments from the eastern Pacific were analyzed for clay minerals, REE and 143Nd/144Nd. Montmorillonite/illite ratio (M/I ratio), total REE contents ((REE), LREE/HREE ratio and cerium anomaly (бCe) may effectively indicate the genesis of clay minerals. Clay fractions with M/I ratio >1, бCe (0.85, (REE (400 μg/g, LREE/HREE ratio (4, and REE patterns similar to those of pelagic sediments are terrigenous and autogenetic mixed clay fractions and contain more autogenetic montmorillonite. Clay fractions with M/I ratio <1, бCe=0.86 to 1.5, ΣREE=200 to 350 μg/g, LREE/HREE ratio (6 and REE distribution patterns similar to that of China loess are identified as terrigenous clay fraction. The 143Nd/144Nd ratios or (э)Nd values of clay fractions inherit the features of terrigenous sources of clay minerals. Clay fractions are divided into 4 types according to (э)Nd values. Terrigenous clay minerals of type I with the (э)Nd values of -8 to -6 originate mainly from North American fluvial deposits. Those of type II with the (э)Nd values of -9 to -7 are mainly from the East Asia and North American fluvial deposits. Those of type III with (э)Nd values of -6 to -3 could come from the central and eastern Pacific volcanic islands. Those of type IV with (э)Nd values of -13 to -12 may be from East Asia eolian. The terrigenous and autogenetic mixed clay fractions show patchy distributions, indicating that there are volcanic or hot-spot activities in the eastern Pacific plate, while the terrigenous clay fractions cover a large part of the study area, proving that the terrigenous clay minerals are dominant in the eastern Pacific.     

事故经济损失评估方法及计算机程序设计

分析了事故的后果和经济损失,详细论述了由于生产活动的中止和人的死亡或劳动能力的丧失而导致的生产活动中劳动力资源损失的计算方法,并应用面向对象的数据库系统Cache′和Delphi开发工具编写了事故经济损失计算程序,以货币形式给出了每个损失点的损失大小并输出可能损失的报告书,为事故管理、安全决策和风险评估提供了科学的依据.     

内蒙古索伦山地区哈尔博格托尔TTG岩锆石年代学、岩石地球化学及大地构造意义

内蒙古索伦山地区是中亚造山带构造演化的关键区域,其中关于古亚洲洋的闭合时限以及西伯利亚板块和华北板块的拼贴时空关系一直存在争议。出露于内蒙古索伦山地区哈尔博格托尔的中酸性侵入岩,其深入研究对探讨古亚洲洋演化具有重要意义。文中对内蒙古索伦山地区哈尔博格托尔TTG岩进行了系统的岩石学、年代学及地球化学研究。获得哈尔博格托尔TTG岩的LA ICP MS锆石U Pb年龄为(266.7±3.7) Ma,表明该侵入岩形成于中二叠世。地球化学主量元素分析表明,索伦山地区哈尔博格托尔TTG岩的岩石系列主要为含钠较高的钙碱性准铝质系列。其稀土元素总量较低,呈现轻稀土元素(LREEs)相对于重稀土元素(HREEs)弱富集的特征,Eu异常不明显;微量元素呈现Rb、Ba、Th、U等大离子亲石元素富集,Nb、Ta、Ti等高场强元素强烈亏损的特征,与典型的岛弧岩浆岩类似。结合索伦山TTG岩体地质特征和区域地质背景,综合年代学和地球化学特征分析,笔者认为索伦山地区哈尔博格托尔TTG岩体形成于岛弧环境,即中二叠世期间古亚洲洋壳向华北板块还存在俯冲作用,因而古亚洲洋至少应在中二叠世以后才闭合。内蒙古索伦山地区哈尔博格托尔TTG岩是洋壳俯冲的岩石学记录,为索伦山缝合带及古亚洲洋构造域演化提供了新的基础地质资料。     

全球变化中的北极碳汇：现状与未来

由于海冰覆盖，北极碳汇（Arctic Carbon Sink）在全球碳通量预算中经常被忽略或简单处理。但随着全球变化加剧，北极发生快速变化，北极碳循环及其对全球变化的响应与反馈日趋重要。综合对北极碳汇的研究结果，分析了北极碳汇的来源、变化以及主要调控因子，评估了北极碳汇现状。探讨了在全球变化中，影响北极碳汇变化的因素及其对未来北极碳汇变化趋势的影响。      

内蒙古西乌旗晚石炭世–早二叠世伸展事件——来自大石寨组火山岩的证据

内蒙古西乌旗地区发育一套中酸性火山岩,空间展布特征显示其为大石寨组火山岩的西延部分。为查明该火山岩的形成时代及构造属性,对其进行了岩石学、年代学和岩石地球化学研究。研究结果表明该火山岩主要由安山岩及流纹岩组成。锆石LA-MC-ICP-MS U-Pb定年结果显示其喷发时代为275~311 Ma,属晚石炭世–早二叠世。岩石地球化学特征表明中性岩富钙贫镁,富集LREE及K、Rb、Ba,亏损Nb、Ta,具有弱Eu异常,安山质岩浆可能是由基性岩浆分离结晶形成的,但在形成过程中受到了陆壳物质混染。酸性岩贫钙镁,富硅碱,具有显著的Eu负异常,亏损Nb、Ta、Sr、P、Ti,反映岩石成因与中下地壳的熔融及其后期的分离作用有关。在构造判别图解中,中性岩具有板内玄武岩特征,而酸性岩具有A2型花岗岩特征。结合区域已发表资料推断,西乌旗大石寨组火山岩形成于造山后伸展环境,暗示古亚洲洋至少在早二叠世之前已经闭合。