Hydraulic modeling of flood pulses in the Middle Bussento Karst System (MBSKS), UNESCO Cilento Global Geopark,southern Italy

Karst systems provide water for domestic and industrial uses and for generating hydropower, but they can also create fluvial hazards, such as upstream back‐flooding and downstream karst flash‐flood events. However, these hazards are difficult to foresee due to the complex recharge‐discharge processes as well as the lack of information on the inside of the system, which has often not been completely surveyed by speleologists or explored by boreholes. To overcome these difficulties, hydro‐chemical data from the monitoring system in the Middle Bussento Karst System (MBSKS), one of the first Experimental Karst Systems in southern Italy, were recorded and previously discussed. Based on shared background in flood karst hydraulic modeling, this paper describes the conceptual premises and rationale of a general‐purpose hydraulic model that is suitable both for the MBSKS and for other Mediterranean, multi‐recharge, mature, conduit‐dominated karst systems. To test the reliability of the model, simulations of time–space behavior and response are performed using natural and artificial flood pulses “as tracers”, considering a “pulse” as a significant variation in water quantity and/or quality. The results of the model explain the interactions between allogenic, autogenic, and anthropogenic recharges from differentiated sources and phreatic conduit systems. These results also clarify the overall response of karst springs at typical time scales of flood pulses. Table acronym name     

Electrical resistivity imaging of hydrologic flow through surface coal mine valley fills with comparison to other landforms

Surface coal mining has altered land cover, near‐surface geologic structure, and hydrologic processes of large areas in central Appalachia, USA. These alterations are associated with changes in water quality such as elevated total‐dissolved solids, which is usually measured via its surrogate, specific conductance (SC). The SC of valley fill effluent streams is a function of fill construction methods, materials, and age; yet hydrologic studies that relate these variables to water quality are sparse due to the difficulty of conducting traditional hydrologic studies in mined landscapes. We used electrical resistivity imaging (ERI) to visualize the subsurface geologic structure and hydrologic flow paths within a valley fill. ERI is a noninvasive geophysical technique that maps spatiotemporal changes in resistivity of the subsurface. We paired ERI with artificial rainfall experiments to track infiltrated water as it moved through the valley fill. Results indicate that ERI can be used to identify subsurface geologic structure and track advancing wetting fronts or preferential flow paths. Our results suggest that the upper portion of the fill contains significant fines, whereas the deeper profile is primarily large rocks and void spaces. Water tended to pond on the surface of compacted areas until it reached preferential flow paths, where it appeared to infiltrate quickly down to >15 m depth in 75 min. ERI applications can improve understanding of how fill construction techniques influence subsurface water movement, and in turn may aid in the development of valley fill construction methods to reduce water quality effects.     

Evaluation of distributed BMPs in an urban watershed—High resolution modeling for stormwater management

The urban environment modifies the hydrologic cycle resulting in increased runoff rates, volumes, and peak flows. Green infrastructure, which uses best management practices (BMPs), is a natural system approach used to mitigate the impacts of urbanization onto stormwater runoff. Patterns of stormwater runoff from urban environments are complex, and it is unclear how efficiently green infrastructure will improve the urban water cycle. These challenges arise from issues of scale, the merits of BMPs depend on changes to small‐scale hydrologic processes aggregated up from the neighborhood to the urban watershed. Here, we use a hyper‐resolution (1 m), physically based hydrologic model of the urban hydrologic cycle with explicit inclusion of the built environment. This model represents the changes to hydrology at the BMP scale (~1 m) and represents each individual BMP explicitly to represent response over the urban watershed. Our study varies both the percentage of BMP emplacement and their spatial location for storm events of increasing intensity in an urban watershed. We develop a metric of effectiveness that indicates a nonlinear relationship that is seen between percent BMP emplacement and storm intensity. Results indicate that BMP effectiveness varies with spatial location and that type and emplacement within the urban watershed may be more important than overall percent.     

Analysis of shaft resistance of jacked piles in sands

In recent years, pile jacking has become a viable alternative installation method for displacement piles. Pile jacking produces minimal noise, vibration and air pollution during installation. In addition, it is possible, at the end of jacking, to have a good estimate of the ultimate static capacity of the pile. In this paper, the shaft resistance of piles jacked into sand is studied using one‐dimensional finite element analysis. The finite element simulations, using a two‐surface plasticity model, demonstrate the effects of relative density and confinement on the unit shaft resistance of piles jacked in sand. The impact of the number of jacking strokes on the unit shaft capacity is also assessed. Based on the numerical results, we developed equations for shaft resistance quantifying the effects of relative density, initial confinement and number of jacking strokes. Predictions using these equations are compared with data obtained from centrifuge tests and field tests. Copyright © 2010 John Wiley & Sons, Ltd.     

基于航测的三维建模方法研究

随着“数字城市”项目在各大城市如火如荼地发展,城市景观重建是数字城市发展的首要步骤和重要内容。本文结合实际生产项目,对基于航测的三维建模方法进行研究。航测法三维建模通过立体采集建筑物平面几何高程数据,并结合测区DEM成果、影像数据等,使用Dibud软件自动生成三维模型,然后,使用3DMAX软件参考外业采集照片精细修模,给模型贴图等。     

Control of syntectonic erosion and sedimentation on kinematic evolution of a multidecollement fold and thrust zone: Analogue modeling of folding in the southern subandean of Bolivia

Several analogue modeling studies have been conducted during the past fifteen years with the aim to discuss the effects of sedimentation and erosion on Foreland Fold and Thrust Belt, among which a few have analyzed these processes at kilometric scale (Malavieille et al., 1993; Nalpas et al., 1999; Barrier et al., 2002; Pichot and Nalpas, 2009). The influence of syn-deformation sedimentation and erosion on the structural evolution of FFTB has been clearly demonstrated. Here, we propose to go further in this approach by the study of a more complex system with a double decollement level. The natural study case is the Bolivian sub-Andean thrust and fold belt, which present all the required criteria, such as the double decollement level. A set of analogue models performed under a CT-scan have been used to test the influence of several parameters on a fold and thrust belt system, among which: (i) the spatial variation of the sediment input, (ii) the spatial variation of the erosion rate, (iii) the relative distribution of sedimentation between foreland and hinterland. These experiments led to the following observations:

• 1. The upper decollement level acts as a decoupling level in case of increased sedimentation rate: it results in the verticalization of the shallower part (above the upper decollement level), while the deeper parts are not impacted.
• 2. Similarly, the increase of the erosion rate involves the uplift of the deeper part (below the upper decollement level), whereas the shallower parts are not impacted.
• 3. A high sedimentation rate in the foreland involves a fault and fold vergence reversal, followed by a back-thrusting of the shallower part.
• 4. A high sedimentation rate in the hinterland favours thrust development toward the foreland in the shallower parts.

     

利用Abel-Poisson径向基函数模型化局部重力场

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。     

广义残差地形模型及其在局部重力场逼近中的应用

研究了残差地形模型中的非调和性问题,比较了基于棱柱体和球冠体的积分模型,提出了基于球冠体积分的广义残差地形模型。以泊松小波径向基函数为构造基函数,结合广义残差地形模型,融合多源实测重力数据构建了局部区域重力场模型。研究结果表明:基于棱柱体积分的残差地形模型精度较低,在山区可能引入毫伽级以上的误差,建议采用更为接近真实地形表面的球冠体积分模型。相比于原始的残差地形模型,基于球冠体积分的广义残差地形模型能更为精确地逼近局部重力场模型中地形因素引起的高频效应。     

基于 Lidar 数据和倾斜摄影的城市三维模型构建

针对传统建模方式建模效率低、模型纹理不够丰富真实等缺点,阐述一种以机载Lidar技术来获取地面点高精度的三维坐标、用倾斜摄影测量为三维建模提供纹理的一种新兴的三维建模方式。实验表明,该建模方式不仅工作效率高、真实反应城市空间布局,而且定位精度高、具备可量测分析功能等,同时提供DOM,DEM,点云数据,倾斜影像等数据。