Experimental and numerical investigation of local scour around a submerged vertical circular cylinder in steady currents

Local scour around a submerged vertical circular cylinder in steady currents was studied both experimentally and numerically. The physical experiments were conducted for two different cylinder diameters with a range of cylinder height-to-diameter ratios. Transient scour depth at the stagnation point (upstream edge) of the cylinder was measured using the so-called conductivity scour probes. Three-dimensional (3D) seabed topography around each model cylinder was measured using a laser profiler. The effect of the height-to-diameter ratio on the scour depth was investigated. The experimental results show that the scour depth at the stagnation point is independent on cylinder height-to-diameter ratio when the later is smaller than 2. The increase rate of equilibrium scour depth with cylinder height increases with an increase in Shields parameter.     

Modelling the effect of wave overtopping on nearshore hydrodynamics and morphodynamics around shore-parallel breakwaters

Wave overtopping nearshore coastal structures, such as shore-parallel breakwaters, can significantly alter the current circulation and sediment transport patterns around the structures, which in turn affects the formation of tombolos and salients in the nearshore area. This paper describes the implementation of a wave overtopping module into an existing depth-averaged coastal morphological mode: COAST2D and model applications to investigate the effect of wave overtopping on the hydrodynamics and morphodynamics around a group of shore-parallel breakwaters. The hydrodynamic aspects of the model were validated against a series of laboratory conditions. The model was then applied to a study site at Sea Palling, Norfolk, UK, where 9 shore-parallel segmented breakwaters including 4 surface-piercing and 5 low-crested breakwaters are present, for the storm conditions in Nov 2006. The model results were compared with laboratory data and field measurements, showing a good agreement on both hydrodynamics and morphological changes. Further analysis of wave overtopping effect on the nearshore hydrodynamics and morphodynamics reveals that wave overtopping has significant impacts on the nearshore circulation, sediment transport and the resulting morphological changes within such a complex breakwater scheme under the storm and macro-tide conditions. The results indicate the importance of including the wave overtopping in modelling nearshore morphodynamics with the presence of coastal structures.     

Deep-sea reef fish assemblage patterns on the Blake Plateau(Western North Atlantic Ocean)

Deep‐water coral habitats are scattered throughout slope depths (360–800 m) off the Southeastern United States (SEUS, Cape Lookout, North Carolina, to Cape Canaveral, Florida), contributing substantial structure and diversity to bottom habitats. In some areas (e.g. off North Carolina) deep corals form nearly monotypic (Lophelia pertusa) high profile mounds, and in other areas (e.g. off Florida) many species may colonize hard substrata. Deep coral and hard substrata ecosystems off the SEUS support a unique fish assemblage. Using the Johnson‐Sea‐Link submersible (in 2000–2005, 65 dives), and a remotely operated vehicle (in 2003, five dives), fishes were surveyed in nine deep reef study areas along the SEUS slope. Forty‐two benthic reef fish species occurred in deep reef habitats in these study areas. Species richness was greatest on the two coral banks off Cape Lookout, North Carolina (n = 23 and 27 species) and lowest on the two sites off Cape Canaveral, Florida (n = 7 and 8 species). Fish assemblages exhibited significantly (ANOSIM, Global R = 0.69, P = 0.001) different patterns among sites. Stations sampled off North Carolina (three study areas) formed a distinct group that differed from all dives conducted to the south. Although several species defined the fish assemblages at the North Carolina sites, Laemonema barbatulum, Laemonema melanurum, and Helicolenus dactylopterus generally had the most influence on the definition of the North Carolina group. Fish assemblages at three sites within the central survey area on the Blake Plateau were also similar to each other, and were dominated by Nezumia sclerorhynchus and L. melanurum. Synaphobranchus spp. and Neaumia sclerorhynchus differentiated the two southern sites off Cape Canaveral, Florida, from the other station groups. Combinations of depth and habitat type had the most influence on these station groups; however, explicit mechanisms contributing to the organization of these assemblages remain unclear.     

Palynology and petroleum potential of the Kazhdumi Formation (Cretaceous: Albian–Cenomanian) in the South Pars field,northern Persian Gulf

The Kazhdumi Formation of the Bangestan Group is a well-known source rock that has produced abundant oil in most petroleum fields in the Zagros Basin, which stretches from northwest to southwest Iran over hundreds of kilometres. The formation reaches a thickness of 230 m at the type section in northwest Zagros but thins out to 40–50 m in wells studied from the South Pars giant petroleum field, where it comprises mainly grey shales with occasional intercalations of marls and sandstones. South Pars, best known as the Iranian part of the world's largest non-associated gas field, contains small quantities of oil above and below the Kazhdumi Formation.     

A control-volume finite-element method for three-dimensional multiphase basin modeling

In this paper we describe a 3D control-volume finite-element method to solve numerically the coupled partial differential equations (PDEs) governing geological processes involved in the evolution of sedimentary basins. These processes include sediment deposition and deformation, hydrocarbon generation, multiphase fluid flow, and heat transfer in deforming porous media.     

Two-dimensional,two-phase granular sediment transport model with applications to scouring downstream of an apron

We present a two-dimensional, two-phase model for non-cohesive sediment transport. This model solves concentration-weighted averaged equations of motion for both fluid and sediment phases. The model accounts for the interphase momentum transfer by considering drag forces. A collisional theory is used to compute the sediment stresses, while a two-equation (k–ε) fluid turbulence closure is implemented. A benchmark sediment transport problem concerning the scouring downstream of an apron is carried out as an example and numerical results agree with existing experimental data.     

海底浅表层不同土类静力触探参数与物理力学性质对比研究

海底土的物理、力学特性是海洋地质学、海洋土工学、海洋地质灾害等调查研究及海洋资源开发环境条件调查和评价等方面非常重要的资料,海底静力触探试验(CPT)是获取这方面资料的一种快速高效、成本低、测试精度高的原位测试方法。它可同时获取海底土锥尖阻力、侧摩阻力等方面的连续原位测试数据,这些数据与海底土取样样品测试分析资料及物探资料结合,可对海底土的工程特性等作比较全面的分析和评价。本文对采集的海底土样的静力触探参数与海底土样的物理力学指标进行相关分析,分粘性土和砂类土二类,建立了海底浅表层土的静力触探参数与物理力学指标之间的相关方程。利用相关方程可以通过静力触探的数据来推算土的物理力学指标,进而对海底土的工程情况作较全面的评价。     

GLIMMER Antarctic Ice Sheet Model,an experimental research of moving boundary condition

A 3-D coupled ice sheet model, GLIMMER model is introduced, and an idealized ice sheet experiment under the EISMINT-1 criterion of moving boundary condition is presented. The results of the experiment reveal that for a steady-state ice sheet profile the characteristic curves describe the process of evolution which are accordant with theoretical estimates. By solving the coupled thermodynamics equations of ice sheet, one may find the characteristic curves which derived from the conservation of the mass, energy and momentum to the ice flow profile. At the same time, an agreement, approximate to the GLIMMER case and the confirmed theoretical results, is found. Present study is explorihg work to introduce and discuss the handicaps of EISMINT criterion and GLIMMER, and prospect a few directions of the GLIMMER model.     

Application of a vanishing, quasi-sigma, vertical coordinate for simulation of high-speed, deep currents over the Sigsbee Escarpment in the Gulf of Mexico

Recent observations over the Sigsbee Escarpment in the Gulf of Mexico have revealed extremely energetic deep currents (near 1 m s⁻¹), which are trapped along the escarpment. Both scientific interest and engineering needs demand dynamical understanding of these extreme events, and can benefit from a numerical model designed to complement observational and theoretical investigations in this region of complicated topography. The primary objective of this study is to develop a modeling methodology capable of simulating these physical processes and apply the model to the Sigsbee Escarpment region. The very steep slope of the Sigsbee Escarpment (0.05–0.1) limits the application of ocean models with traditional terrain-following (sigma) vertical coordinates, which may represent the very complicated topography in the region adequately, can result in large truncation errors during calculation of the horizontal pressure gradient. A new vertical coordinate system, termed a vanishing quasi-sigma coordinate, is implemented in the Navy Coastal Ocean Model for application to the Sigsbee Escarpment region. Vertical coordinate surfaces for this grid have noticeably gentler slopes than a traditional sigma grid, while still following the terrain near the ocean bottom. The new vertical grid is tested with a suite of numerical experiments and compared to a classical sigma-layer model. The numerical error is substantially reduced in the model with the new vertical grid. A one-year, realistic, numerical simulation is performed to simulate strong, deep currents over the Escarpment using a very-high-resolution nested modeling approach. The model results are analyzed to demonstrate that the deep-ocean currents in the simulation replicate the prominent dynamical features of the observed intense currents in the region.     

基于灰关联分析方法卡尔曼滤波器的精度效能评估

针对综导系统卡尔曼滤波器的特点,深入研究了灰关联分析法在滤波器精度效能评估中的应用。给出卡尔曼滤波器进行灰关联分析的方法和步骤,并对某一类型的滤波器进行精度效能评估。仿真结果表明了该方法的可行性和有效性。