新疆北天山中东段地区震源参数研究

本文首先利用经验格林函数方法证明了新疆北天山中东段地区的震源谱基本满足ω-2 模型。在此基础上 ,通过对S波观测谱中的噪音、仪器、路径、场地等影响的逐一消除 ,得到了研究区 10 5次ML2 5～ 5 7地震的震源谱 ,进而根据Brune的圆盘震源模型计算了地震矩、应力降、震源半径等震源参数。结果表明 ,这些地震的标量地震矩M0 与ML 震级线性相关较好 ,关系为Log10 M0 =1 10ML+ 17 2 0 ;震源半径在 10 0～ 15 0 0m之间 ;应力降介于 1～ 16 0bar之间 ,优势分布于 1～ 10 0bar。地震矩与拐角频率的关系呈现出两段趋势 ,可能表明了研究区震源的多重标度特征 :当M0 小于 4× 10 2 1dyne cm时 (相当于ML4 0地震 ) ,应力降显示出对M0 有依赖关系 ;当M0 大于 4× 10 2 1dyne cm时 ,地震的应力降不依赖于M0 。     

Discussion on the dynamic mechanism of Great North China area based on the observed stress data

Introduction The Great North China, located at longitude 106E to 124E and latitude 31N to 42N, in-cludes three secondary active tectonic blocks, Ordos, Yanshan and North China plain (Figure 1). The geological tectonics of these three secondary blocks is much different from each other. As a stable block with high rigidity, the Ordos block is mostly surrounded by down-faulted basins with an inactive interior since Cenozoic, although the fault zones along its boundary are strongly active wi…     

Distribution of chlorophyll-a off the Changjiang River and its dynamic cause interpretation

Red tide,also called harmful algal bloom interna-tionally,is a disaster abnormal phenomenon of oceanecology with an explosive breed or dense assemble ofone or several phytoplanktons in a specific ocean en-vironment condition,colors the seawater,influencesand harms ocean living things.The formation of redtide is controlled mainly by a complex interplay ofbiological,physical and chemical processes,but themost main cause influencing the occurrence of red tideis the seawater eutrophication,i.e.,the…     

上海市公共卫生中心空调设计

介绍了上海市公共卫生中心空调通风的设计特点,突出反映在呼吸道传染病区、呼吸道门诊、呼吸道临检、生物安全实验室的系统设计中,并介绍了空调水系统的特殊要求。     

An approach for quantifying geomorphological impacts for EIA of transportation infrastructures: a case study in northern Spain

A methodological proposal for the assessment of impacts due to linear infrastructures such as motorways, railways, etc. is presented. The approach proposed includes a series of specific issues to be addressed for each geomorphological feature analysed—both ‘static’ and ‘dynamic’—as well as a series of steps to be followed in the process.Geomorphic characteristics potentially affected were initially identified on the basis of a conceptual activities/impacts model that helps to single out geomorphic impacts related to environmental concerns for the area. The following issues were addressed for each individual impact: nature of potential effects; indicators that can be used to measure impacts; criteria of ‘geomorphologic performance’; procedure for measurement/prediction of changes; translation of geomorphologic impacts into significant terms from the viewpoint of human concerns; possible mitigation and/or compensation measures.The procedure has been applied to a case study corresponding to a new motorway in the Basque Country, northern Spain. Geomorphological impacts considered in this analysis included: (1) consumable resources; (2) sites of geomorphological interest; (3) land units with high potential for use, high productivity or value for conservation; (4) visual landscape; (5) slope instability processes. The procedure has been designed for implementation in a Geographic Information System (GIS) environment. Details are given on the application of the method to each individual impact analysed and results are presented in both numerical and map form.Impacts assessed were initially expressed by means of heterogeneous magnitudes, depending on the geomorphological feature considered. Those geomorphological impacts were then translated into significant terms and homogeneous magnitudes. Integration was carried out on the basis of impact values thus obtained. Final integrated results were also expressed in numerical and map form.The method proposed enables comparison of alternatives as well as ‘prediction’ and assessment of impacts in terms directly related to geomorphic characteristics. It also facilitates the expression of those impacts in terms that allow integration with other types of environmental impacts.     

Late Quaternary systematic stream offsets caused by repeated large seismic events along the Kunlun fault, northern Tibet

The Kunlun fault is one of the largest strike-slip faults in northern Tibet, China. In this paper, we focus upon the Kusai Lake–Kunlun Pass segment of the fault to understand the geomorphic development of offset streams caused by repeated large seismic events, based on tectono-geomorphic analysis of high-resolution satellite remote sensing images combined with field studies. The results indicate that systematic left-lateral stream offsets appear at various scales across the fault zone: Lateral offsets of small gullies caused by the 2001 M_w 7.8 Kunlun earthquake vary typically from 3 m to 6 m, meanwhile streams with cumulative offsets of 10 m, 25–30 m, 50–70 m, 250–300 m and 750–1400 m have resulted from repeated large seismic events during the late Quaternary. An average slip rate of 10 ± 1 mm/year has been estimated from the lateral stream offsets and ¹⁴C ages of alluvial fan surfaces incised by the streams. A three-dimensional model showing tectono-geomorphic features along a left-lateral strike-slip fault is also presented. The Kusai Lake–Kunlun Pass segment provides an opportunity to understand the relationship between geomorphic features produced by individual large seismic events and long-term geomorphic development caused by repeated large seismic events along a major strike-slip fault.     

珠江三角洲江村ZK2钻孔沉积物粒度的环境意义

运用MALVERN公司2000型粒度仪对珠江三角洲地区的江村ZK2钻孔作粒度分析，江村钻孔按粒度的偏态值可划分为两个河相与海相或湖泊沼泽相的沉积交替过程，同时与粒度参数、年代数据以及前人所做的孢粉等证据相结合，大致看出研究区气候变化的4个千年尺度的气候波动：第一阶段为较长时间的冷干期，该段时间约为20-10．7kaB．P．；第二阶段为回暖期，时间大致在10．7-7．5kaB．P.,总体比较湿润；第三阶段为升温期，该时期约在7．5-5kaB．P．之间，在此期间各有一次干湿交替；第四阶段为降温期，时间大约出现在5kaB．P．至今，这是一个波动性较大的时期，也各有一次干湿交替。     

Petrology of the Jurassic Shah-Kuh granite (eastern Iran), with reference to tin mineralization

The Shah-Kuh granitic pluton of eastern Central Iran was emplaced 165 Ma ago, in an active continental margin setting. It is made of two main units: a granodioritic unit (SiO₂=63–71 wt%) to the north–west and a syenogranitic unit (SiO₂=73–77 wt%) to the south–east. The former unit displays seriate medium-grained textures and contains locally abundant mafic enclaves. The latter unit is medium- to coarse-grained and porphyritic, with 0.5–3 cm long K-feldspar megacrysts. Fine-grained granitic bodies are present in both units. The rocks are metaluminous to slightly peraluminous (I-type) and peraluminous (S-type) and belong to the ilmenite-series granites. Fractional crystallization appears to have been a very effective differentiation process in both units, and the fractionated mineral assemblages are determined by mass balance calculations. Isotopic data (Sr_i=0.7065 and εNdt=−2.5) are consistent with a young upper crustal protolith. Tin mineralization in sheeted quartz-tourmaline (-cassiterite) veins is spatially associated with the granodioritic unit. The veins formed by hydraulic fracturing when the granodioritic to monzogranitic magma became water-saturated and exsolved a fluid phase during crystallization. The reduced nature of this magma is responsible for the incompatible behaviour of Sn, likely to favour Sn concentration in the residual melt and then in the exsolved fluid. Another fluid phase was exsolved by the syenogranitic magma and was responsible for local greisenized granites, characterized by high Y and HREE-contents and non-fractionated REE distribution patterns. Field and mineralogical data show that the (B, Sn) vein-forming fluid was different from the (F, Li) greisen-forming fluid.