利用地质雷达探测青岛港木质高桩码头承台完整性

利用EKKO－100型探地雷达对青岛港木质高桩码头承台完整性进行探测，结合现场钻探、孔内波速测试、岩样分析测试，进一步对码头的工程性状进行了分析和评价。     

青岛浮山野生花卉种质资源

本文简要叙述了青岛浮山野生花卉的种类、生长环境、园林用途及开花结果日期，为把这些野生花生花卉引进城市园林提供科学依据。     

关于“包装产品的计量标准型一次抽检方案”的确定

本文给出了“包装产品的计量标准型一次抽检方案”,并通过一个实例说明本方案比一般《计量标准型一次抽检方案》更为优越。     

P矢量方法在南海夏季环流诊断计算中的应用

基于1998年6～7月南海调查航次的CTD资料,对南海环流采用最近发展的P矢量方法进行诊断计算.计算结果:黑潮向西入侵南海,然后做反气旋弯曲向东北方向流动,最终有通过巴士海峡流出南海的趋势.在南海北部存在一个气旋性环流,这个环流的强度和范围随深度增加而减小.该环流的冷中心位置随深度增加稍向南移.南海中部、越南以东海域存在一个明显的气旋涡和反气旋涡,尤其在200m及其以上水层均相当稳定,反气旋涡位于越南以东,其中心位置在11°53'N,111°50'E,气旋涡的中心位置在13°17'N,112°55'E,两者的尺度皆约为250km.吕宋岛西侧存在一个反气旋涡.在计算海区南部、巴拉望岛西南海域,100m以上层存在一个反气旋式涡.从各层流场分布均可以显示海流在西部强化的现象.     

湄洲湾泥沙活动及海底冲淤变化

湄洲湾沙源少,海水含沙量低,平均值10～20g/m~3。冬季受东北季风及浙闽沿岸流影响,湾口含沙量高,达到34g/m~3;夏季受径流影响,湾内含沙量相对偏高,达到16g/m~3。泥沙的运移趋势:主航道基本朝外,两侧朝里。受强潮流作用,深槽及水下潮流冲沟受到冲刷,斜坡及潮坪略有淤积。     

浙、闽海域仙菜科[CERAMIACEAE(RHODOPHYTA)]海藻研究Ⅰ

根据1957～1987年期间采自浙江和福建沿岸的仙菜科海藻标本，初步鉴定有7属14种。分两次报道，首先报道其中的5屑7种：复羽多孢藻Pleonosporiumvenustissimum、日本对丝藻Antithamnionnipponicum和卡洛绢丝藻Callithamnioncallophyllidicola为我国首次较全面描述和绘图记录；赫勒对丝藻Antithamnionhubbsii为浙、闽海域首次报道；而如下三个种纵胞藻Centrocerasclavulatum、日本凋毛藻Griffithsiajaponica和对公藻Antithammioncruciatum在浙、闽海区早有报道。     

9012号热带气旋维持的卫星云图和垂直结构特征分析

本文根据卫星云图的演变和常规天气分析相结合，对9012号热带气旋登陆后维持水消的成因进行了分析。指出该热带气旋经久不消的重要原因为其西南侧对流云团和东北侧高空槽前对流云带与热带气旋云系相衔接在中低层东北气流引导下卷入，热带气旋内部的两条云带的维持，以及利有的环流条件。     

Determination of cadmium(II), copper(II), manganese(II) and nickel(II) species in Antarctic seawater with complexing resins

The strong species of cadmium(II), copper(II), manganese(II) and nickel(II) in an Antarctic seawater sample are investigated by a method based on the sorption of metal ions on complexing resins. The resins compete with the ligands present in the sample to combine with the metal ions. Two resins with different adsorbing strengths were used. Very stable metal complexes were investigated with the strong sorbent Chelex 100 and weaker species with the less strong resin, Amberlite CG-50. Strong species were detected for three of the considered metal ions, but not for Mn(II). Cu(II) is completely linked to species with a side reaction coefficient as high as log α_M(I) = 11.6 at pH = 7.3. The ligand concentration was found to be similar to that of the metal ion, and the conditional stability constant was around 10²⁰ M^− 1. In the considered sample, only a fraction of the metal ions Cd(II) and Ni(II) is bound to the strong ligands, with side reaction coefficients equal to log α_M(I) = 5.5 and 6.5 at pH = 7.3 for Cd(II) and Ni(II), respectively. These findings were confirmed by the test with the weaker sorbent Amberlite CG-50. It can be calculated from the sorption equilibria that neither Mn(II) nor Ni(II) is adsorbed on Amberlite CG-50 under the considered conditions and, in fact, only a negligible fraction of Mn(II) and Ni(II) was adsorbed. A noticeable fraction of Cd(II) was adsorbed on Amberlite CG-50, meaning that cadmium(II) is partially linked to weak ligands, possibly chloride, while no copper(II) was adsorbed on this resin, confirming that copper(II) is only combined in strong species. These results are similar, but not identical, to those obtained for other seawater samples examined in previous investigations.     

福建近海主要经济渔业生物营养级和有机碳含量研究

本文研究了福建近海52种鱼类、6种虾类、4种蟹类、1种虾蛄和4种头足类的食性和营养级及其有机碳含量。结果表明：营养级以鱼类最高，为2．1～3．7级，平均2．65级；头足类为2．04～2．88级，平均2．60级；蟹类2．38～2．73级，平均2．58级；虾类最低，为1．64～2．21级，平均1．96级．干样有机碳含量百分率也以鱼类最高，为33．0％～76．2％(m／m)，平均46．25％(m／m)；头足类为27．80％～46．16％(m／m),平均40．24％(m／m)；虾类为30．60％～38．40％(m／m),平均34．90％(m/m)；蟹类最低,为25．00％～30．78％(m/m)，平均28．24％(m／m),鲜样有机碳含量百分率还是以鱼类最高,为4．80％～29．55％(m／m),平均13．75％(m／m)；蟹类为8．90％～12．68％(m／m),平均10．74％(m/m)；虾类为6．97％～11．53％(m/m)，平均9．55％(m/m)；头足类最低仅为7．38％～8．52％(m／m),平均7．95％(m/m),干样有机碳含量百分率和鲜样有机碳含量百分率与营养级均成正相关，但前者的相关性高于后者。     

Modelling linear wave transformation induced by dissipative structures—Random waves

The relevant theory is presented and numerical results are compared with the analytical solution for the interaction of non-breaking waves with an array of vertical porous circular cylinders on a horizontal bed. The extension to the cases of unidirectional and multidirectional waves is obtained by means of a transfer function. The influence of the mechanical properties of porous structures and wave irregularity on wave transformation is analysed. Results for unidirectional and multidirectional wave spectra are compared to those obtained for regular waves. The model presented reproduces well the analytical results and provides a tool for analysing several engineering problems.