Occurrence and evolution of the Xiaotangshan hot spring in Beijing, China

Thermal groundwater occurs in bedrock aquifers consisting of the dolomite of the Wumishan Group of the Jixianin System and the Cambrian carbonate in the Xiaotangshan geothermal field near the northern margin of the North China Plain, China. The hot water in the geothermal field of basin-type discharges partly in the form of the Xiaotangshan hot spring under natural conditions. The hot water has TDS of less than 600 mg/L and is of Na·Ca-HCO₃ type. The geothermal water receives recharge from precipitation in the mountain area with elevation of about 500 m above sea level to the north of the spring. Thermal groundwater flows slowly south and southeast through a deep circulation with a residence time of 224 years estimated with the Ra–Rn method. The Xiaotangshan hot spring dried up in the middle of the 1980s owing to the increasing withdrawal of the hot water in the geothermal field in the past decades. The water level of the geothermal system still falls continually at an annual average rate of about 2 m, although water temperature changes very little, indicating that the recharge of such a geothermal system of basin-type is limited. Over-exploitation has a dramatic impact on the geothermal system, and reduction in exploitation and reinjection are required for the sustainable usage of the hot water.     

Application of MODFLOW and geographic information system to groundwater flow simulation in North China Plain, China

MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology. Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December 2003. During this period, the total recharge of the groundwater system was 49,374 × 10⁶ m³ and the total discharge was 56,530 × 10⁶ m³ the budget deficit was −7,156 × 10⁶ m³. In this integrated system, the original data including graphs and attribution data could be stored in the database. When the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online.     

Seal integrity and feasibility of CO<Subscript>2</Subscript> sequestration in the Teapot Dome EOR pilot: geomechanical site characterization

This paper reports a preliminary investigation of CO₂ sequestration and seal integrity at Teapot Dome oil field, Wyoming, USA, with the objective of predicting the potential risk of CO₂ leakage along reservoir-bounding faults. CO₂ injection into reservoirs creates anomalously high pore pressure at the top of the reservoir that could potentially hydraulically fracture the caprock or trigger slip on reservoir-bounding faults. The Tensleep Formation, a Pennsylvanian age eolian sandstone is evaluated as the target horizon for a pilot CO₂ EOR-carbon storage experiment, in a three-way closure trap against a bounding fault, termed the S1 fault. A preliminary geomechanical model of the Tensleep Formation has been developed to evaluate the potential for CO₂ injection inducing slip on the S1 fault and thus threatening seal integrity. Uncertainties in the stress tensor and fault geometry have been incorporated into the analysis using Monte Carlo simulation. The authors find that even the most pessimistic risk scenario would require ∼10 MPa of excess pressure to cause the S1 fault to reactivate and provide a potential leakage pathway. This would correspond to a CO₂ column height of ∼1,500 m, whereas the structural closure of the Tensleep Formation in the pilot injection area does not exceed 100 m. It is therefore apparent that CO₂ injection is not likely to compromise the S1 fault stability. Better constraint of the least principal stress is needed to establish a more reliable estimate of the maximum reservoir pressure required to hydrofracture the caprock.     

Glacier change and glacier runoff variation in the Tuotuo River basin,the source region of Yangtze River in western China

Glaciers in the Tuotuo River basin, western China, have been monitored in recent decades by applying topographical maps and high-resolution satellite images. Results indicate that most of glaciers in the Tuotuo River basin have retreated in the period from 1968/1971 to 2001/2002, and their shrinkage area is 3.2% of the total area in the late 1960s. To assess the influence of glacier runoff on river runoff, a modified degree–day model including potential clear-sky direct solar radiation has been applied to the glaciated regions of the river basin over the period 1961–2004. It was found that glacier runoff has increased in the last 44 years, especially in the 1990s when a two-thirds increase in river runoff was derived from the increase in glacier runoff caused by loss of ice mass in the entire Tuotuo River basin.     

Neoliberalism and natural resource management: Agri-environmental standards and the governing of farming practices

Private standards and certification schemes are widely acknowledged as playing an increasingly important role in agri-environmental governance. While much of the existing research concludes that these mechanisms consolidate the global extension of neoliberalism – enhancing the power of corporate actors to the detriment of smaller producers – we argue that this overlooks the complex ways in which standards are used by governments and farmers in the governing of farming practices. Focusing specifically on a process standard – Environmental Management Systems (EMS) – promoted by the Australian government as a way of verifying the ‘clean and green’ status of agricultural exports, we examine how one regional group of producers has sought to use EMS standards in practice. Our analysis of a case study in the state of Victoria appears to confirm that EMS was a successful instrument for the extension of neoliberal governance, reinforcing the production of neoliberal subjectivities and practices amongst farmer participants and enabling the government to compensate for gaps in environmental provision. However, it would be a mistake to interpret the development of this EMS scheme as an example of naïve farmers manipulated by the state. In practice, farmers used the opportunities provided by government funding to undertake actions which expressed their own agri-environmental values and practices. Establishment of an EMS and associated eco-label enabled producers to demonstrate and extend their capacity to act as good environmental stewards. Our research highlights how the local application of environmental standards negotiates and shapes, rather than simply contributes to, neoliberal rule.     

Impact of lightning on organic matter-rich soils: influence of soil grain size and organic matter content on underground fires

A detailed study was carried out on a piece of land that had been struck by lightning during the violent rainstorm that raged over the Island of S?o Miguel (Azores Archipelago) in late October 2006. Temperature and gas measurements (CO₂, CO, H₂S and CH₄) were performed in four study trenches, dug in an area of ∼3 m², where an underground fire had been initiated by the impact with a lightning stroke, followed by the emission of a column of gases and smoke. The soil under study was originally a well-pedogenized about 80 cm thick bed, made of volcanic clayey to silty tephra fallouts and contained 5.5–9.7% of organic matter. The underground fire was monitored for one week and revealed a peak release of 404 ppm CO and 3.4% CO₂ originating from a horizon located about 45 cm under the soil surface. Measurements of temperature, performed one week after the impact, indicated a maximum value of 326°C inside the soil, while 516.5°C were measured on the surface of a lava block interred about 20 cm under the surface. Subsequently, a stratigraphic and sedimentologic study proved the role of the grain-size of the soil and of the organic matter content of the different horizons of the impact area, in determining the ratio between anoxic/oxidised combustion conditions and in the progress of the process itself. It was also noticed that combustion was not total all over in the soil bed and that the process had slightly migrated toward SW during the observation period. The combustion process went on for about ten days, in spite of several other violent rainstorms, until it was artificially extinguished through the excavations made to obtain study trenches. This particular circumstance evidenced the potential natural hazard represented by this kind of atmospheric event, especially in a land where the volcanic nature of the soil may easily mislead inexperienced observers and, consequently, delay proper action.     

Methodology for preliminary assessment of Natech risk in urban areas

Concern for natural hazard-triggered technological disasters (Natech disasters) in densely populated and industrialized areas is growing. Residents living in urban areas subject to high natural hazard risk are often unaware of the potential for secondary disasters such as hazardous materials releases from neighboring industrial facilities, chemical storage warehouses or other establishments housing hazardous materials. Lessons from previous disasters, such as the Natech disaster during the Kocaeli earthquake in Turkey in 1999 call for the need to manage low frequency/high consequence events, particularly in today’s densely populated areas. However, there is little guidance available on how local governments and communities can assess Natech risk. To add to the problem, local governments often do not have the human or economic resources or expertise to carry out detailed risk assessments. In this article, we propose a methodology for preliminary assessment of Natech risk in urban areas. The proposed methodology is intended for use by local government officials in consultation with the public. The methodology considers possible interactions between the various systems in the urban environment: the physical infrastructure (e.g., industrial plants, lifeline systems, critical facilities), the community (e.g., population exposed), the natural environment (e.g., delicate ecosystems, river basins), and the risk and emergency management systems (e.g., structural and nonstructural measures). Factors related to vulnerability and hazard are analyzed and qualitative measures are recommended. Data from hazardous materials releases during the Kocaeli, Turkey earthquake of August 17, 1999 are used as a case study to demonstrate the applicability of the methodology. Limitations of the proposed methodology are discussed as well as future research needs.

Reducing hazard vulnerability through local government engagement and action

The concept of a natural hazard is a human construct. It is the interaction with human communities and settlements that defines a natural phenomenon as a natural hazard. Thus the end point of hazard mitigation and hazard vulnerability assessment must involve an attempt to reduce, or mitigate, the impact of the natural hazard on human communities. The responsibility to mitigate hazard impact falls primarily upon governments and closely connected non-government and private institutional agencies. In particular, it is most often local government that takes the responsibility for safeguarding its own communities, infrastructure and people. Hazard vulnerability of specific local communities is best assessed by the local government or council, which then faces the responsibility to translate that assessment into community education and infrastructural safeguards for hazard mitigation. This paper illustrates the process of local government engagement in hazard mitigation in Australia, through the Natural Disaster Risk Management Studies, as a first step towards natural disaster reduction.     

Natural background levels and threshold values of monitored parameters in the Cambrian-Vendian groundwater body,Estonia

The Cambrian-Vendian groundwater body plays an important role in drinking water supply of capital Tallinn and other settlements in northern Estonia. Water quality in this deep-seated confined groundwater body is influenced by the intrusion of present-day seawater and pumping-induced upward migration of deeper saline groundwater. The aim of this study is to evaluate the threshold values applying the methodology worked out within the EU 6th FP project “Background criteria for the identification of groundwater thresholds (BRIDGE)” and to compare the results with the values proposed by local authorities. A database containing 250 monitoring points was completed and used for the calculation of natural background levels (as the 90 and 97.7 percentile) in groundwater. The calculation of threshold values is based on natural background levels and reference values. In case of Cambrian-Vendian groundwater body the receptor is drinking water, thus limit values set by Estonian drinking water standard were used as reference values. The threshold values proposed by local authorities are more or less the same as calculated by BRIDGE methodology. Exceptionally different values are derived in case of chloride and ammonium.     

气举反循环采矿方法单井试验及应用探讨

湖南道县一个矿区,铁锰矿体储量约2200万t。由于复杂的水文地质和工程地质条件,从20世纪70年代发现后,一直没有开采。笔者通过多年大直径工程井的实践经验,查阅国内外资料后,提出了钻井-气举反循环法试开采的方法,并在现场进行了单孔开采试验,获得了比较满意的效果。以该矿体Ⅱ号矿为例,介绍了钻井-气举反循环法采矿的适用条件、工艺过程以及试采情况,并就以后大面积开采提出了若干技术措施。