《江苏省地图集》电子版的设计与实现

探讨地图集电子版的设计原则,从《江苏省地图集》电子版的设计与实现入手,分析地图集电子版的设计思路和技术方案.阐述多媒体电子地图集的解决方案.     

黄河下游引黄区沉沙处理运行方案分析研究*

黄河是多沙性河流,引黄必带进大量泥沙,沉沙池沉粗排细,能有效处理泥沙。当沉沙池淤满,失去自流沉沙作用时,采用"以挖待沉"可以延长灌区运行年限,但没有扬水沉沙方案优越。根据黄河下游地上河的特殊地貌条件,如果能在河漫滩上建沉沙池,可以解决沉沙占地的难题。     

Reprint of: Comparison of modern fluid distribution,pressure and flow in sediments associated with anticlines growing in deepwater (Brunei) and continental environments (Iran)

Differences in fluids origin, creation of overpressure and migration are compared for end member Neogene fold and thrust environments: the deepwater region offshore Brunei (shale detachment), and the onshore, arid Central Basin of Iran (salt detachment). Variations in overpressure mechanism arise from a) the availability of water trapped in pore-space during early burial (deepwater marine environment vs arid, continental environment), and b) the depth/temperature at which mechanical compaction becomes a secondary effect and chemical processes start to dominate overpressure development. Chemical reactions associated with smectite rich mud rocks in Iran occur shallow (∼1900 m, smectite to illite transformation) causing load-transfer related (moderate) overpressures, whereas mechanical compaction and inflationary overpressures dominate smectite poor mud rocks offshore Brunei. The basal detachment in deepwater Brunei generally lies below temperatures of about 150 °C, where chemical processes and metagenesis are inferred to drive overpressure development. Overall the deepwater Brunei system is very water rich, and multiple opportunities for overpressure generation and fluid leakage have occurred throughout the growth of the anticlines. The result is a wide variety of fluid migration pathways and structures from deep to shallow levels (particularly mud dykes, sills, laccoliths, volcanoes and pipes, fluid escape pipes, crestal normal faults, thrust faults) and widespread inflationary-type overpressure. In the Central Basin the near surface environment is water limited. Mechanical and chemical compaction led to moderate overpressure development above the Upper Red Formation evaporites. Only below thick Early Miocene evaporites have near lithostatic overpressures developed in carbonates and marls affected by a wide range of overpressure mechanisms. Fluid leakage episodes across the evaporites have either been very few or absent in most areas. Locations where leakage can episodically occur (e.g. detaching thrusts, deep normal faults, salt welds) are sparse. However, in both Iran and Brunei crestal normal faults play an important role in the transmission of fluids in the upper regions of folds.     

VLISP与VBA结合编程在测量放线工作中的应用

作为CAD二次开发工具中比较易学的编程工具,VBA和VLISP各有优点。VLSIP善于直接使用AutoCAD的命令,而VBA用来开发对话框显得简单得多。文中介绍将它们结合起来并成功开发出一个在CAD电子图上拾取坐标生成两种不同格式的测量放线文件程序的简单实例,提出在进行CAD二次开发的过程中,发挥VBA与VLISP各自的优点,通过"中介"CAD系统变量来传递数据信息的方法,把两种程序结合起来开发CAD应用程序。     

电子信息化技术在地方资源介绍方面的应用

本文通过对灵宝市矿产资源电子信息化实施的工程实例 ,详细阐述了这种技术方法在介绍地方部门资源方面的优势 ,以及运用它所必须的软件、硬件环境等和实施这种技术的方法。     

深部盐岩层绳索取心钻井液技术研究与应用

由于次生应力场的作用以及盐岩易溶于水的特性,深部盐岩层钻进存在岩层蠕动、钻井液易遭受盐钙侵等问题;钻进参数选择不合理易导致盐岩层取心效率低、岩心冲蚀严重。本文以河南省叶舞凹陷ZK3井为例,采用石油钻井与绳索取心相结合的措施,解决了普通固体矿产钻探设备在深部地层取心中效力不足的问题;通过阳离子交换容量测定、矿物组分鉴定、钻井液体系优选及性能测试等试验,确定了针对上部泥岩地层的聚合物钻井液体系,中部含膏泥岩的欠饱和盐水钻井液体系,下部盐岩层取心段的饱和盐水钻井液体系。通过确定合适的钻井液密度与临界环空返速,可以有效控制深部盐岩层蠕变与井壁冲蚀,适度提高排量以成倍提高钻进速度。钻进过程中钻井液性能稳定,体系转换顺利且性能易于调整,为取心任务的顺利完成提供了有力保证。     

不同开采条件下采空区地表变形机理的数值模拟研究

通过建立数值模型,模拟不同采深、采宽、采厚及不同开采倾角下采空区地表的变形,通过数值模拟及计算得出各开采条件下地表的下沉曲线及水平移动曲线,进而分析地表变形规律及变形机理,为研究开采引起的地表变形提供一种便捷的方法。     

Excel 在坐标法测设曲线中的应用

利用Excel软件计算带有缓和曲线的圆曲线放样数据,可有效解决坐标的计算问题,提高内业工作效率,并提出坐标法测设曲线的方法,分析了在不同的情况下,如何选择合适的坐标放样方法保证曲线测设的精度。     

Interplay between an axial channel belt,slope gullies and overbank deposition in the Puchkirchen Formation in the Molasse Basin,Austria

Deep‐water sediments in the Molasse Basin, Austria, were deposited in a narrow foreland basin dominated by a large channel belt located between the steep Alpine fold and thrust belt to the south and the gentler northern slope off the Bohemian Massif. Several gas fields occur outside the channel belt, along the outer bend of a large meander. Accumulation of these overbank sediments reflects a complicated interplay between slope accommodation and debris‐flow and turbidity‐flow interaction within the channel. The tectonically oversteepened northern slope of the basin (ca 2 to 3°) developed a regionally important erosional surface, the Northern Slope Unconformity, which can be traced seismically for >100 km in an east–west direction and >20 km from the channel to the north. The slope preserves numerous gullies sourced from the north that eroded into the channel belt. These gullies were ca 20 km long, <1 km wide and ca 200 m deep. As the channel aggraded, largely inactive and empty gullies served as entry points into the overbank area for turbidity currents within the axial channel. Subsequently, debris‐flow mounds, 7 km wide and >15 km long, plugged and forced the main channel to step abruptly ca 7 km to the south. This resulted in development of an abrupt turn in the channel pathway that propagated to the east and probably played a role in forming a sinuous channel later. As debris‐flow topography was healed, flows spread out onto narrow area between the main channel and northern slope forming a broad fine‐grained apron that serves as the main gas reservoir in this area. This model of the overbank splay formation and the resulting stratigraphic architecture within the confined basin could be applied in modern and ancient systems or for subsurface hydrocarbon reservoirs where three‐dimensional seismic‐reflection data is limited. This study elucidates the geomorphology of the oversteepened slope of the under‐riding plate and its effects on the sedimentation.     

道路平面测设计算的通用公式

基于各类道路线型曲率呈线性变化的共同特性,给出了线元上任意点坐标方位角的统一计算公式,进而提出了适用于所有道路线型平面测设计算的中桩坐标、边桩坐标的通用公式。在此基础上,讨论线路外一点对应中桩的计算以及直线与线路交点的计算,给出了相应的计算方案。