加筋土坡临界高度的研究

假定破裂面为一过坡脚的斜平面,分别以传统塑性理论和广义塑性理论为基础,导出了加筋土坡临界高度的计算公式。通过与前人试验结果的比较发现,虽然基于广义塑性理论极限法求得的加筋土坡临界高度值要比基于传统塑性理论极限法求得的临界高度值略偏大,且更接近于试验实测值,但二者在工程中均是可靠的,都可用于加筋土坡设计时的参考。     

The engineering geology of the Lower Lias Clay at Blockley,Gloucestershire, UK

Summary The Lower Lias Clay at Blockley, 20 km due south of Stratford-upon-Avon, UK, is thought to be representative of this clay formation over much of the Severn Basin. As far as the mineralogy of the clay is concerned, illite is the dominant clay mineral, kaolinite being subsidiary, with quartz, calcite, pyrite and chlorite/vermiculite present in subsidiary or accessory amounts. Weathering changes the mineralogy, with illite being degraded and calcite and pyrite being removed. Furthermore free iron oxide coatings become important as a result of weathering, with the maximum concentrations being present in the highly weathered material.The unweathered clay possesses a preferred orientation associated with turbostratic structures. At certain horizons microfolding and remoulding occurs in the unweathered clay and silty layers are displaced. Weathering has progressively destroyed the micro-structures present in the weathered clay horizons.The fissures in the Lower Lias Clay occur in five uniplanar sets. In the unweathered clay the intensity is fairly constant but it increases in a narrow zone just below the weathered horizons. The number of curved fissures also increases at this depth. This intense fissuring continues into the lowest zone of weathered clay where weathering is confined to the fissure surfaces. Fissures become less apparent in the more weathered horizons as more and more degradation has taken place. However, new smaller fissure systems are developed in the weathered clay, as are desiccation cracks.Engineering index properties and values of shear strength are given. Relationships between moisture content and strength, liquid limit and iron (Fe) content were observed, and a relationship between weathering zones and the shear strength-depth curve was established.     

考虑饱和黏土初始各向异性的循环边界面塑性模型

天然土体的初始各向异性通常可对其后继循环特性产生显著影响。现有考虑循环载荷作用的土体弹塑性模型,往往采用类似修正剑桥模型的椭圆形屈服面,已有研究表明,该椭圆形屈服面因其拉伸弹性区域偏大,针对天然K0固结状态的土体,其计算精度较差。基于新近提出的广义各向同性硬化准则,在边界面方程中引入初始各向异性张量,并采用空间滑动面破坏准则（SMP）的变换应力法,建立了能考虑饱和黏土初始各向异性的循环边界面塑性模型。分别针对等压和偏压固结的饱和黏土静、动三轴试验进行模拟,结果表明,该模型能合理反映土体的初始各向异性及其后继循环动力特性。     

Low-Temperature Plasticity of Naturally Deformed Calcite Rocks

Optical, cathodoluminescence and transmission electron microscope (TEM) analyses were conducted on four groups of calcite fault rocks, a cataclastic limestone, cataclastic coarse-grained marbles from two fault zones, and a fractured mylonite. These fault rocks show similar microstructural characteristics and give clues to similar processes of rock deformation. They are characterized by the structural contrast between macroscopic cataclastic (brittle) and microscopic mylonitic (ductile) microstructures. Intragranular deformation microstructures (i.e. deformation twins, kink bands and microfractures) are well preserved in the deformed grains in clasts or in primary rocks. The matrix materials are of extremely fine grains with diffusive features. Dislocation microstructures for co-existing brittle deformation and crystalline plasticity were revealed using TEM. Tangled dislocations are often preserved at the cores of highly deformed clasts, while dislocation walls form in the transitions to the fine-grained     

Influences of fisheries management measures on biological characteristics of threadfin bream (Nemipterus virgatus) in the Beibu Gulf,South China Sea

Long-term variations in population structure, growth, mortality, length at median sexual maturity, and exploitation rate of threadfin bream(Nemipterus virgatus) are reported based on bottom trawl survey data collected during 1960–2012 in the Beibu Gulf, South China Sea. Laboratory-based analyses were conducted on 16 791 individuals collected quarterly in eight different sampling years. Average body length, estimated asymptotic length, and percentage of large individuals have decreased significan...     

Interaction between different internal length scales in strain localization analysis of fully and partially saturated porous media—the 1‐D case

The paper analyses the interaction between two internal length scales during dynamic strain localization in multiphase porous materials. The first internal length is introduced in the mathematical model by the gradient‐dependent plasticity for the solid skeleton, while the second one is naturally contained in the multiphase model and is due to the seepage process of the water via Darcy's law, which induces a rate‐dependent behaviour of the solid skeleton. Numerical results of a one‐dimensional example of water saturated porous medium demonstrate the competing effect between these two length scales. The porous medium is here treated as a multiphase continuum, with the pores filled by water and air, the last one at constant atmospheric pressure. Copyright © 2005 John Wiley & Sons, Ltd.     

Coupled damage and plasticity modelling in transient dynamic analysis of concrete

In a concrete structure subjected to an explosion, for example a concrete slab, the material is subjected to various states of stress which lead to many modes of rupture. Closer to the explosive, a state of strong hydrostatic compression is observed. This state of stress produces an irreversible compaction of the material. Away from the zone of explosion, confinement decreases and the material undergoes compression with a state of stress, which is slightly triaxial. Finally, the compression wave can be reflected on a free surface and becomes a tensile wave, which by interaction with the compression wave, produces scabbing. We present, in this paper, a model aimed at describing these three failure modes. It is based on visco‐plasticity and rate dependent damage in which a homogenization method is used in order to include the variation of the material porosity due to compaction. The model predictions are compared with several experiments performed on the same concrete. Computations of split Hopkinson tests on confined concrete, a tensile test with scabbing, and an explosion on a concrete slab are presented. Copyright © 2001 John Wiley & Sons, Ltd.     

对我国统一土质分类的建议

本文通过对我国3万多土样实际资料的统计分析,综合国内外土质分类的优点,提出一个以有机质含量、粒度成分和塑性图综合考虑的统一土质分类方案。它与我国几种主要分类相对比,比较符合我国实际情况,新旧分类衔接也不成问题。本文最后根据我国实际资料的分析,对塑性图的功能作了论述。     

Phenotypic plasticity of Vermetidae suspension feeding: a potential bias in their use as Biological Sea-Level Indicators

Some organisms represent useful Biological Sea‐Level Indicators (Bio SLI) thanks to their constant position relative to sea level and allow the reconstruction of past sea level changes. The sessile gastropods Vermetidae are among the most used indicators, since their shells often resist time averaging and can be easily dated with ¹⁴C. However, all these vermetids have a level of precision (± 0.5–1 m), obtained from data on the Mediterranean Dendropoma petraeum (Monterosato, 1884). We found a certain degree of plasticity in this species; it can also live subtidally, not in correspondence with the main sea level, where it feeds adopting a mixed feeding strategy. Considering this variability and the almost complete lack of knowledge for other Bio SLI vermetids, it appears clear that a common value of precision cannot be maintained and the precision of other vermetid species remains to be tested.     

A numerical investigation of influence of low-plasticity fines in sand on lateral response of piles

Abstract

Experimental evidence suggests that sands containing non-plastic or low-plasticity fines may show either decreasing or increasing shear strength with increasing fines content in certain situations. Accordingly, the presence of low-plasticity fines can significantly affect the ultimate lateral soil resistance; thus low-plasticity fines can affect the lateral response of piles. In this study, a quantitative method is proposed for determining the effect of low-plasticity fines in sand on the lateral response of piles in sand by combining a strain wedge model and a unified critical state compatible (UCSC) framework. An equivalent granular state parameter is employed in the UCSC framework to define the soil state uniquely in the strain wedge. The proposed quantitative method is incorporated in a finite element program. A series of numerical analyses are performed on a laterally loaded pile embedded in various relative densities of the base (clean) sand, to which various quantities of low-plasticity fines are added. The effect of low-plasticity fines on the lateral response is investigated. Furthermore, the effect of the low-plasticity fines on the response of the strain wedge is discussed.