Galileo系统的频率和信号结构

根据近期公布的由Galileo信号任务组制订的Galileo频率和信号结构计划，列出了Galileo选用的频率和信号结构，包括数据周期，伪随机噪声码扩频的实施等，它考虑了和GPS系统的全兼容和相互共用问题，但对码序列选择、导航电文格式内容等方面尚未确定，有待今后进一步研究确定后公布。     

WAVE-CISK对称不稳定谱点分布的半圆定理

采用滞弹性近似研究了WAVE-CISK下对称性扰动的谱点分布,得到了WAVE-CISK下对称不稳定扰动谱点分布的半圆定理,用其可估计该对称不稳定增长率的上界.发现存在WAVE-CISK时加热反馈和层结参数对该不稳定的增长率均有重要影响.WAVE-CISK加热反馈越强、基流的垂直切变越大,扰动的垂直结构越简单则该不稳定增长率的上界就越大.存在WAVE-CISK时滞弹性近似下的对称不稳定发生的条件也较Boussinesq近似下的更苛刻.     

数字滤波器的频谱窗和噪声压缩度

根据傅里叶理论导出了数字滤波器的频谱窗，根据随机过程理论导出了数字滤波的噪声压缩度。通过对二项式系数数字滤波器和多项式系数数字滤波器和频谱窗和噪声压缩度的分析，发现前者对噪声具有较强的压缩作用，同时能保持信号的凹凸性，是一种优于后者的数字滤波器。     

通海地磁台(L=1.03)Pc3地磁脉动的出现率

利用通海地磁台(L=1．03)1999年SMALL磁通门磁力仪记录资料，对Pc3脉动出现率的统计结果表明，日出现频次有两个峰值，即清晨06：00-07：00LT(地方时)出现频次最高，午后14：00～15：00LT为次峰值。Pc3脉动月出现频率最高的是4月和12月，其次是8月和9月；最少的是6月和7月。按季节统计结果为春秋季出现频次最高，冬季次之，夏季最低。     

经验GREEN函数法研究丽江6.0级强余震的地震动及破裂特征

利用经验Green函数方法，用1996年云南丽江地震后的ML4．7级地震合成了这次地震的最大余震Ms6．0的加速度记录，通过与实际记录在频域和时域的对比研究，分析研究了地震动特征和这次最大余震的可能破裂特征，并对经验Green函数方法进一步的改进方向进行了探讨。     

绿柱石通道中配合物的振动光谱和辐照裂解

以四川平武富碱型绿柱石为研究对象 ,采用 IR和 L RM测试方法 ,重点对通道中氢化物和多聚合离子的配位构型、辐照裂解及热致转型进行了较深入系统的研究。研究表明 ,在该区成矿作用条件下 ,绿柱石通道中的钠离子趋向与氢离子化合反应生成 Na H氢化物 ,并占据通道中的 C2 位。在垂直 c轴方向上 ,以 3165 cm-1,3114 cm-1及 30 31cm-1伸缩振动弱吸收谱带为特征。[Fe2 ( OH) 4 ] 2 多聚合离子占据通道中的 C1位 ,以 32 34 cm-1伸缩振动锐吸收谱带为特征 (∥ c轴 )。辐照作用导致上述多聚合离子的裂解 ,并形成不稳定的 [H0 ] i心和相对稳定的 [Fe3 ] OH心。与之对应的吸收谱带分别出现在 3110 cm-1(⊥ c轴 )和 335 5cm-1(∥c轴 )处。通道中 Na H和 [Fe2 ( OH) 4 ] 2 多聚合离子的存在 ,可视为该类型绿柱石的一个重要的成因标志。     

Inelastic spectra for displacement-based seismic design

In recognition of the emergence of displacement-based seismic design as a potentially more rational approach than force-based techniques, this paper addresses derivation of inelastic displacement spectra and associated topics. A well-constrained earthquake strong-motion dataset is used to derive inelastic displacement spectra, displacement reduction factors and ductility–damping relationships. These are in a format amenable for use in design and assessment of structures with a wide range of response characteristics.     

Seismic interaction in linearly connected electrical substation equipment

An electrical substation consists of a complex set of equipment items that are interconnected through conductor buses or cables. If the connections are not sufficiently flexible, significant dynamic interaction may occur between the connected equipment items during a seismic excitation. This interaction is believed to be responsible for some of the observed substation equipment damage in recent earthquakes. This paper investigates the interaction between two equipment items connected by a linear spring‐dashpot or spring‐dashpot‐mass element representing a conductor bus. It is found that the interaction between the two equipment items may significantly amplify the response of the higher‐frequency equipment item. The influences of various key parameters on the interaction effect are quantified. Means for reducing the adverse interaction effect are described. Copyright © 2001 John Wiley & Sons, Ltd.     

Characterization of Geochemical Distributions Using Multifractal Models

The use of multifractals in the applied sciences has proven useful in the characterization and modeling of complex phenomena. Multifractal theory has also been recently applied to the study and characterization of geochemical distributions, and its relation to spatial statistics clearly stated. The present paper proposes a two-dimensional multifractal model based on a trinomial multiplicative cascade as a proxy to some geochemical distribution. The equations for the generalized dimensions, mass exponent, coarse Lipschitz–Hölder exponent, and multifractal spectrum are derived. This model was tested with an example data set used for geochemical exploration of gold deposits in Northwest Portugal. The element used was arsenic because a large number of sample assays were below detection limit for gold. Arsenic, however, has a positive correlation with gold, and the two generations of arsenopyrite identified in the gold quartz veins are consistent with different mineralizing events, which gave rise to different gold grades. Performing the multifractal analysis has shown problems arising in the subdivision of the area with boxes of constant side length and in the uncertainty the edge effects produce in the experimental estimation of the mass exponent. However, it was possible to closely fit a multifractal spectrum to the data with enrichment factors in the range 2.4–2.6 and constant K₁ = 1.3. Such parameters may give some information on the magnitude of the concentration efficiency and heterogeneity of the distribution of arsenic in the mineralized structures. In a simple test with estimated points using ordinary lognormal kriging, the fitted multifractal model showed the magnitude of smoothing in estimated data. Therefore, it is concluded that multifractal models may be useful in the stochastic simulation of geochemical distributions.     

Oxidation Experiment of Natural Megacrystal Clinopyroxene: Implications for Assignment of Mössbauer Spectra

The Mössbauer spectra of natural megacrystal clinopyroxene are usually fitted by 4 sets of symmetric doublets, A‐A', B‐B', C‐C' and D‐D', respectively, in terms of increasing Qs value in literature. But the assignments of those doublets are quite different, except the D‐D' doublet assigned to Fe³⁺at the lattice site M***1 in previous papers. Particularly, the assignment and interpretation of the C‐C' doublet are diverse. The oxidation experiments of natural megacrystal clinopyroxene collected from the Hannuoba basalt, North China, were performed under controlled conditions of temperature at 1000°C and oxygen fugacity of FMQ buffer in 1, 2, ***3 and 5 days respectively. The oxidized samples were then measured by X‐ray diffraction spectrometry and Mössbauer spectrometry. The oxidation of clinopyroxene is characterized by Fe²⁺ → Fe³⁺at M1 under the subsolidus conditions, which is consistent with the increase of the area of the D‐D' doublet when the heating time increases. Accordingly, the area of the A‐A' and B‐B' doublets decreases with the increasing heating time. However, the area of C‐C' keeps almost constant. Therefore, the 4 sets of doublets can be assigned correctly as follows: A‐A' doublet to Fe⁺²at M1, B‐B' Fe²⁺at M1, C‐C' Fe²⁺at M2, and D‐D' Fe³⁺at M1. The M1 site splitting is due to the NNN (Next Nearest Neighbour) effect of the M2 site. The amount of Fe³⁺at the tetrohedral site of megacrystal clinopyroxene is negligible according to this study.