A modified numerical calculation method of collapse pressure for thick-walled offshore pipelines

Considering the shear deformation and thickness stretching of large deformation, a modified numerical calculation method based on the thick shell theory is established to determine the collapse pressure of thick-walled pipes. Verification experiments are conducted on ten pipe specimens in hyperbaric chambers. The good agreement between experimental results and numerical predictions shows the validity and reliability of the new numerical calculation method. Combining DNV specification, the characteristic collapse pressure is also calculated for comparison. The difference between experimental results and DNV calculations illustrates the latter one is much conservative in predicting collapse pressure for thick-walled pipes. Sensitivity analysis on manufacturing imperfections and material properties is investigated for pipes with different D/t ratios. Thick-walled pipes are easier to be affected by initial ovality, residual stress and hardening factor. Based on the stress distribution at the moment of collapse, a novel discovery is found that the collapse pressure of thick-walled pipes is dominated by material plastic behavior.     

Population connectivity of an overexploited coastal fish,Argyrosomus coronus (Sciaenidae), in an ocean-warming hotspot

The West Coast dusky kob Argyrosomus coronus is a commercially exploited fish with a distribution confined to the Angola–Benguela Frontal Zone (ABFZ) of the southeastern Atlantic Ocean. A previous study revealed that during a recent period of local warming the species extended its distribution into Namibian waters, where it hybridised with the resident and congeneric Argyrosomus inodorus. Environmental changes are a major threat to marine biodiversity and when combined with overfishing have the potential to accelerate the decline of species. However, little is known regarding the evolutionary history and population structure of A. coronus across the ABFZ. We investigated genetic diversity, population structure and historical demographic changes using mtDNA control region sequences and genotypes at six nuclear microsatellite loci, from 180 individuals. A single, genetically homogeneous population was indicated across the distributional range of A. coronus (φ_ST = 0.041, F_ST = 0.000, D = 0.000; p > 0.05). These findings imply that the oceanographic features within the ABFZ do not appear to significantly influence population connectivity in A. coronus, which simplifies management of the species. However, reconstruction of the demographic history points to a close link between the evolutionary history of A. coronus and the environmental characteristics of the ABFZ. This outcome suggests the species’ vulnerability to the rapid environmental changes being observed across this region, and highlights a pressing need for transboundary management to mitigate the impacts of climate change in this global hotspot of seawater temperature changes.     

Intra-seasonal variability of the abyssal currents in COMRA’s contract area in the Clarion-Clipperton Zone

In this paper, the intra-seasonal variability of the abyssal currents in the China Ocean Mineral Resources Association (COMRA) polymetallic nodule contact area, located in the western part of the Clarion and Clipperton Fraction Zone in the tropical East Pacific, is investigated using direct observations from subsurface mooring instruments as well as sea-surface height data and reanalysis products. Mooring observations were conducted from September 13, 2017 to August 15, 2018 in the COMRA contact area (10°N, 154°W). The results were as follows: (1) At depths below 200 m, the kinetic energy of intra-seasonal variability (20?100 d) accounts for more than 40% of the overall low-frequency variability, while the ratio reaches more than 50% below 2 000 m. (2) At depths below 200 m, currents show a synchronous oscillation with a characteristic time scale of 30 d, lasting from October to the following January; the energy of the 30-d oscillation increases with depth until the layer of approximately 4 616 m, and the maximum velocity is approximately 10 cm/s. (3) The 30-d oscillation of deep currents is correlated with the tropical instability waves in the upper ocean.     

南太平洋辐合带(SPCZ)的特征分析

根据热带西太平洋卫星云图资料及流场特征分析,讨论了南太平洋辐合带(SPCZ)的演变特征和形成机理。提出SPCZ是反映西太暖池同东太冷舌海气耦合系统以及暖池大气同相邻陆区大气间相互作用的重要特征。主要表现为在12～2月的热带西太平洋上的NW/SE辐合带,其形成原因主要应归因于西太暖池本身,以及暖池与东太赤道冷水舌强度与相对位置改变引发的Walker环流位置与走向的变动,另外,新几内亚岛及澳洲大陆也有重要影响。     

多尺度阵列嵌套组合反演宾川气枪源区横波速度结构

本文基于多尺度阵列嵌套组合的方式,利用频率-贝塞尔变换法（Frequency-Bessel,F-J方法）提取背景噪声面波频散信息,通过多个阵列融合的频散曲线反演得到宾川气枪发射台周边不同深度的横波速度结构.结果显示：浅层一阶面波频散信息的加入,使得基阶反演结果更加收敛,反演深度加深到8 km;深度在8 km以下的结构的研究利用多尺度阵列（密集台阵-宾川气枪台网-云南区域地震台网）嵌套组合的方式,面波基阶低频信息从0.55 Hz拓宽到0.008 Hz,使横波速度结构的反演深度显著增加,同时对反演过程提供约束,使得70 km深度以上的横波速度更收敛.由此本文所得的横波速度结构为该区地下结构的探测提供基础,多尺度阵列嵌套组合频散谱的研究方式也为以后区域结构的研究提供一种新的方法和思路.

     

Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

A model of the formation and development of ocean shear wave

Ａｍｏｄｅｌｏｆｔｈｅｆｏｒｍａｔｉｏｎａｎｄｄｅｖｅｌｏｐｍｅｎｔｏｆｏｃｅａｎｓｈｅａｒｗａｖｅ￥ＱｉａｏＦａｎｇｌｉａｎｄＺｈａｎｇＱｉｎｇｈｕａ（ＦｉｒｓｔＩｎｓｔｉｔｕｔｅｏｆＯｃｅａｎｏｇｒａｐｈｙ，ｓｔａｔｅｏｃｅａｎｉｃＡｄｍｉｎｉｓ...     

Seismic structure and tectonics of the Shackleton Fracture Zone (Drake Passage,Scotia Sea)

The structural framework of the southern part of the Shackleton Fracture Zone has been investigated through the analysis of a 130-km-long multichannel seismic reflection profile acquired orthogonally to the fracture zone near 60° S. The Shackleton Fracture Zone is a 800-km-long, mostly rectilinear and pronounced bathymetric lineation joining the westernmost South Scotia Ridge to southern South America south of Cape Horn, separating the western Scotia Sea plate from the Antarctic plate. Conventional processing applied to the seismic data outlines the main structures of the Shackleton Fracture Zone, but only the use of enhanced techniques, such as accurate velocity analyses and pre-stack depth migration, provides a good definition of the acoustic basement and the architecture of the sedimentary sequences. In particular, a strong and mostly continuous reflector found at about 8.0 s two-way traveltime is very clear across the entire section and is interpreted as the Moho discontinuity. Data show a complex system of troughs developed along the eastern flank of the crustal ridge, containing tilted and rotated blocks, and the presence of a prominent listric normal fault developed within the oceanic crust. Positive flower structures developed within the oceanic basement indicate strike-slip tectonism and partial reactivation of pre-existing faults. Present-day tectonic activity is found mostly in correspondence to the relief, whereas fault-induced deformation is negligible across the entire trough system. This indicates that the E–W-directed stress regime present in the Drake Passage region is mainly dissipated along a narrow zone within the Shackleton Ridge axis. A reappraisal of all available magnetic anomaly identifications in the western Scotia Sea and in the former Phoenix plate, in conjunction with new magnetic profiles acquired to the east of the Shackleton Fracture Zone off the Tierra del Fuego continental margin, has allowed us to propose a simple reconstruction of Shackleton Fracture Zone development in the general context of the Drake Passage opening.     

山东郯城麦坡中更新世地震事件记录*

山东郯城麦坡被命名为典型地震活动断层遗址,其最醒目的标志是郯庐断裂带主干断层(F₂)东盘的紫灰色下白垩统逆冲到断层西盘的红棕色第四系之上且界线截然。野外调查和试验分析表明,郯城麦坡第四系于泉组中发育液化砂涌管、液化砂脉、震裂缝充填构造和同沉积断层等地震引发的软沉积物变形构造——地震事件记录。根据软沉积物变形构造的砂质黏土光释光测年分析,推断这些软沉积物变形构造所记录的地震事件属郯庐断裂带主干断层F₂在中更新世晚期发生的强构造与地震活动。这些地震事件记录为研究郯庐断裂带新构造运动与地震活动提供了新资料,也丰富了该地震活动断层遗址的内涵。