Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

科学计算可视化技术的研究与应用

本文介绍了科学计算可视化技术的发展和应用情况，论述了这一新技术的特点及其在油气藏描述，工程设计ＣＡＤ等学科的应用和发展趋势。阐述了目前国际国内计算机图形学领域具体的研究方向和方法及图形软件、图形硬件的发展概况。     

An application of factor analysis for the study of the hydrogeological conditions in Plio-Pleistocene aquifers of NW Achaia (NW peloponnesus, Greece)

R- andQ-mode factor analysis is applied to 51 groundwater samples collected from wells drilled in the Plio-Pleistocene aquifers of NW Achaia, Greece. The purpose ofR- andQ-mode factor analysis application is to identify (i) the regional groundwater flow pattern, and (ii) the deterioration of groundwater quality. Sixteen hydrogeological parameters are used in order to examine their importance and to provide significant insight into their correlations. In theR-mode factor analysis, a six-factor model is suggested which can explain more than 77.5% of the total variance. The contribution of each factor at every site (factor scores) also is computed. Maps are constructed showing the geographical distribution of the factor scores. From these maps, the high salinity areas are delineated (seawater intrusion, possible appearance of halite layers) and the areas with elevated contribution of karastic-water are defined. Using theQ-mode correspondence analysis the meaning of the electrical conductivity as the most important variable in groundwater quality characterization is demonstrated.     

Texture and mineralogy of sediments from the Ganges-Brahmaputra-Meghna river system in the Bengal Basin, Bangladesh and their environmental implications

 The Bengal basin, Bangladesh, represents one of the most densely populated recent floodplains of the world. The sediment flux through the basin is one of the highest on a global scale. A significant portion of this sediment load find its sink in the basin itself because of its lower elevation and frequent flooding. The textural, mineralogical and chemical nature of the sediments thus have an important bearing on the environmental quality of the basin as well as for the Bay of Bengal. The sediment load of the Ganges-Brahmaputra-Meghna (GBM) river system consists exclusively of fine sand, silt and clay at their lower reaches within the Bengal basin, Bangladesh, and is deposited under uniformly fluctuating, unidirectional energy conditions. The sediments have a close simitarity in grain size with the sediments of the surrounding floodplain. The mineral assemblage is dominated by quartz and feldspars. Illite and kaolinite are the major clay minerals, and occur in almost equal proportion in bed sediments. The heavy mineral assemblage is dominated by unstable minerals which are mostly derived from high-rank metamorphic rocks. The characteristic smaller grain-size, i.e. having large surface-to-mass ratios, and the mineralogy of sediments suggests that they are susceptible to large chemical adsorptive reactions and thus could serve as a potential trap for contaminants. However, the sediments of the GBM river system in the Bengal basin, Bangladesh, shows lower concentration of Pb, Hg and As, and a marginally higher value for Cd as compared to that of standard shale. Considering population density and extensive agricultural practice in the basin, the sediments can in the long run become contaminated. Received: 9 November 1994 · Accepted: 18 June 1996     

Mechanism on bipolar distribution of Permian brachiopods

By reasearch on geographic distribution, nine genera in bipolar distribution are selected from Permian brachiopods. These taxa originated from middle-high latitude areas in the boreal realm, of which five genera were derived from Late Carboniferous, and other four genera originated from Permian. They were all in bipolar distribution during some different stages in Permian. Specific diversity for each genus was high in the boreal realm, whereas in the Gondwana realm was very low. Perdurability was long in the boreal realm, and short in the Gondwana realm. It was the time when these nine genera came to their maximum diversity that these genera appeared in the Gondwana and formed bipolar distribution; while they also migrated to the low latitude from high latitude. This shows very close relationship between several main cooling events in Permian and the migration of genera from the boreal realm to the Gondwana realm through the Tethys. Therefore, the cooling events might be the main drive which caused these cold-water-type brachiopods migrated to the Gondwana realm and being bipolar distribution. In this process, the planula tolerance to warm water would be another important factor.     

我国页岩气资源及影响因素

在世界面临能源短缺的背景下,页岩气作为油气勘探的一个新领域,越来越得到世界各国的重视。我国页岩气资源丰富,许多盆地或地区具有页岩气大规模成藏的地质条件,对页岩气的研究显得尤为重要。该文介绍了我国页岩气资源储量、分布及开采面临的问题,概述了页岩气地质特征。在此基础上探讨了我国页岩气的影响因素,认为我国页岩气主要受有机碳含量、成熟度、裂缝的发育程度、地层压力的控制;页岩气与煤层气同属于非常规天然气,其赋存形态、成因类型、富集规律具有很多相似之处,因此可将页岩气与煤层气进行对比研究。     

含粗粒金矿样品采集加工与分析研究进展

含粗粒金矿,由于粗粒金的存在使其样品的采集、加工和分析极具挑战性,如何获得具有代表性和均匀性的化学分析样品,并提供准确的分析结果,长期以来一直是该类金矿资源勘查评价急待解决的技术难题。本文对近年来国内外含粗粒金矿样品的采集、加工和分析方法等3方面开展的研究工作及主要成果进行归纳分析,认为:1含粗粒金矿样品的采集是确保样品代表性的首要环节,含粗粒金矿样品分析结果的潜在误差有80%来源于样品采集,因此研究经济、有效的样品采集方法至关重要。2含粗粒金矿样品的加工主要从提高自然金的粉碎度,改进加工流程,选择样品加工设备等方面进行,但查明金的粒度分布及伴生矿物是拟定样品加工流程的关键。3含粗粒金矿样品的分析方法有常规的化学分析方法、批量浸金法和人工重砂加权平均法,相对于复杂的加工流程研究,后者有望成为此类样品经济有效的分析方法。本文指出,含粗粒金矿资源评价质量的误差来源于地质、采样、加工、分析等诸多方面,总体而言应最小化所有阶段误差,应特别重视样品采集方法的研究,确保采集样品的代表性是提高该类金矿资源评价质量的前提。     

青藏高原地区MODIS反照率两种反演结果差异的对比分析

采用对照反演比法对比分析了青藏高原地区相同时空条件下的MODIS反照率当量反演结果和全反演结果的差异。利用2002—2004年青藏高原地区Terra MODIS数据开展的对照反演试验表明:(1)黑空反射率BSA两种反演结果的绝对偏差小于0.03,白空反射率WSA两种反演结果的绝对偏差约为0.04;BSA两种反演结果绝对偏差的标准差约为0.05,而WSA的则更大。(2)BSA两种反演结果和WSA两种反演结果的绝对偏差及其标准差均存在一定的年际差异。(3)可见光区反照率两种反演结果的绝对偏差及其标准差一般大于红外光区两种反演结果的绝对偏差及其标准差。(4)两种地表反照率反演结果的绝对偏差及其标准差在青藏高原地区三种主要地表类型的差异不大。