岩石三轴强度试验

通过自制岩石三轴压力室和配备液压泵与现有万能材料试验机组成岩石三轴试验系统，进行岩石三轴强度试验研究，并与其它方法比对，结果相近，满足了科研和生产的需要。     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

三类高强度悬式瓷绝缘子的成分和物相分析

为探讨高原牌70kN和进口120，210kN瓷绝缘子的成分和结构性能，中采用原子吸收光谱（AAS）和X射线衍射（XRD）方法，对三类产品进行了检测。结果表明，有效成分除K2O外，70kN和210kN的SiO2,Al2O3,Fe2O3含量接近，主晶相基本相同，有刚玉，莫来石、石英和长石等；结晶相总量：70kN35%，120kN40%,210kN48%，这表明机械强度愈大，结晶相含量愈高，只需调整70kN原样的部分成分，粒度和工艺，即生产出高等级（如210kN)瓷绝缘子。     

Crack damage stress as a composite function of porosity and elastic matrix stiffness in dolomites and limestones

Twenty-five uniaxial compression tests were performed to determine stress at onset of dilation, referred to herein as “the crack damage stress,” in heterogeneous dolomites and limestones. A simplified model for crack damage stress (σ_cd) is developed here using porosity, elastic modulus, Poisson's ratio and three empirical coefficients. The model shows that when porosity decreases and elastic modulus increases, σ_cd rapidly increases and approaches its maximum value. On the other hand, when porosity increases and elastic modulus decreases, σ_cd rapidly decreases and approaches its minimum value. The proposed model is validated for six heterogeneous limestone and dolomite formations which are widely distributed in Israel.     

岩石圈流变机制的确定及影响岩石圈流变强度的因素

讨论了确定岩石圈流变强度中存在的问题，根据Byerlee定律，给出了在Anderson断层系统下三种断层的摩擦滑动强度公式，利用小标本实验结果外推，用大标本实验结果作约束，得到岩石圈几种典型岩石的脆性破裂规律，利用上述结果和传统的方法，分别得到了鄂尔多斯和山西裂谷两个典型地区的流变强度随深度的变化。结果表明，以往的计算对岩石圈流变强度的估计过高，对脆性形变区估计不足，流变机制估计不对；岩石圈有力学分层的特性，但各地分层的深度范围不同，使得成层和力学作用变得复杂，讨论了水、应变率以及多相矿物对流变强度的影响。     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

The Advances and Prospects of Research on Earthquake Engineering at IEM

This paper describes briefly the recent advances and acievements of the research projects conducted by the Institute of Engineering Mechanics(IEM) in the period of the Ninth Five-Year Plan(1995-2000) with the support of the China Seismological Bureau(CSB),These projects are related with key problems in the field of earthquake engineering.They are:development of the methods for determining earthquake resistant design load level,study on mechanisms of earthquake damage to buildings.development of new technology of base isolation,and study on earthquake damage prediction and seismic losss assessment methods.Through these studies,quite a number of problems have een solved and some of them have een applied in earthquake engineering design and practice.     

多矿物岩石流变规律的研究进展及存在问题

总结了近年来由多种矿物组成的岩石的流变规律的研究，阐述了多矿物岩石流变性质研究的意义和进展，再从实验和理论两个方面，详细论述了目前最具代表性的三种理论模型，算术平均方法、几何平均方法和能量极小方法，最后，指出这方面研究仍然存在的问题和进一步研究的方向。     

基于高温高压岩石破裂实验结果对中强地震前震中附近区域部分地震学现象的初步解释

依据高温高压岩石破裂实验结果并结合理论分析，对 附近区域不同深度温压条件下岩石变形破坏性质及破坏失稳的力学行为进行了研究，在一次应力加载循环中，发生破坏的部位随时间具有向深部下迁的趋势。考虑到深度温压条件下岩石的渐进式破坏行为及突发失稳，对主震前震中附近区域小地震活动的增强、平静、活化等现象，以及b值等时间序列参数变化的可能机理进行初步探讨，并简单讨论了两类平静和两类b值变化的可能原因。     

滑带土动力学性质试验研究

为了研究地震高烈度区老滑坡的复活变形原因,本文对滑坡滑带土的动力学特性进行了系列研究。本次试验采用扰动土样,制样基本物理指标按滑带土的现场测试指标确定,在不固结不排水条件下,运用MTS810Teststar程控液压伺服土动三轴仪对单个样品逐级放大动应力的分级试验方法进行。侧向压力 (围压 )分别采用 100kPa、20 0kPa、300kPa三级,通过施加轴向振动荷载 (力 )模拟地震作用,振动波形为正弦波,频率为 1Hz,振幅随试样性质确定。研究结果表明,滑带土在动荷载作用下的动力学性质与其静荷载作用下的力学性质有着较大的差异,主要表现在滑带土的动应力与动应变关系的非线性、滞后性及变形积累特点,动弹性模量与动强度的显著降低以及动阻尼比的显著增大特性。这揭示了动力作用下的滑坡复活原因之一,同时为滑坡稳定性评价和动力作用下的变形机制模拟分析提供了基础资料,也为分析滑带土动力本构模型提供了基本内容。