吐哈盆地丘东凝析气藏中侏罗统储层流动单元划分

对吐哈盆地丘东凝析气藏中侏罗统储层的流动单元的划分方法和参数选取进行探讨。针对丘东凝析低渗透气藏的储层和流体特点,纵向上对研究区中侏罗统地层进行小层精细划分,平面上应用SPSS统计分析软件对厚度、孔隙度、泥质含量、流动带指数等4个参数进行聚类分析和判别分析,将研究区中侏罗统储层砂体划分为4类流动单元。结果表明各流动单元的类型与储层物性、沉积微相具有很好的对应关系,能够客观地反映气藏储层的地质特征。虽然丘东凝析低渗透气藏中流动单元的划分和油藏中流动单元的划分没有太大差别,但是参数的选取却与油藏中的存在着明显的不同。     

渤海湾盆地南堡凹陷原油成因类型及其分布规律

南堡凹陷近年油气勘探取得了重大突破,为揭示该区滩海与陆地油气成因及分布规律,对67个原油和油砂样品进行了详细的地球化学研究。南堡凹陷原油具有低硫、中高蜡含量特征,陆相成因特点显著。共分为4种类型原油:(1)陆地沙三段深部层系原油,具有高4-甲基甾烷丰度、低奥利烷丰度与低甲基菲指数值和轻微偏高成熟度特征;(2)陆地Es1—Ed原油与Ng和Nm原油,其特征与第一类原油相反;上第三系原油普遍遭遇生物降解;(3)滩海东营组原油,以较高伽马蜡烷/C30藿烷和高甾烷/藿烷值区别于陆地原油;(4)滩海奥陶系潜山原油,具有低丰度甾萜类生物标志物、相对高丰度孕甾烷、三环萜烷与重排甾烷系列等特征,显示较高成熟度。上述4种成因类型原油指示南堡凹陷陆地、滩海均存在多层导有利烃源岩;同层位中滩海Es1-Ed存在较陆地更为优越的有利烃源岩,南堡滩海地区具有广泛的油气勘探前景。     

碎屑岩与火山岩混积岩系层序地层学研究初探——以准噶尔盆地西北缘佳木河组为例

准噶尔盆地西北缘前陆冲断带是剖析西准噶尔地区盆山耦合关系、沉积体系发育的关键地段。该区二叠系佳木河组为火山岩、火山碎屑岩、碎屑岩组成的混积地层。火山岩与碎屑岩组成的地层单元有广义上的成因联系,因为它们都属于史密斯地层,并均具有旋回特征。针对不同的岩性区:碎屑岩岩性区、火山岩与碎屑岩共存区、纯火山岩区,找出由于构造火山活动、相对湖平面变化等因素形成的可作为层序界面的不整合面。碎屑岩岩性区不整合面在地震剖面上主要表现为削蚀、底超、双向下超、顶超、下切谷等;共存区为同时发育火山岩与碎屑岩的削蚀带,不整合面类型较复杂;纯火山岩区表现为相对湖平面下降形成的削蚀不整合面。故可以通过地震、钻测井资料识别各类不整合面,并依据火山喷发方式、火山旋回、沉积旋回,按照不同对比原则进行经典层序地层学划分。     

松辽盆地葡萄花油田北部鞍部地区成藏控制因素分析

在系统描述葡萄花油田北部鞍部地区构造特征和断裂体系的基础上,分析了烃源岩大量排烃期与构造形成时期的匹配关系、砂体分布、地层压力和断层封闭性对研究区成藏的控制作用。研究结果表明:烃源岩大量排烃期和构造形成时期良好匹配,地层压力低势区和在成藏时期断块边界断层侧向开启是成藏的有利条件,构造和砂体分布则是成藏的主要控制因素。研究区成藏条件较好,可作为有利扩边潜力区。     

曲靖盆地生物气成藏条件及主控因素分析

曲靖盆地新近系茨营组第三段的晚期生物气藏是新近系沉积之后,喜山运动时期各种成藏条件有效的时空配置的结果.在讨论曲靖盆地构造和沉积演化的基础上,综合分析了生物气源、储集层和盖层、圈闭形成以及天然气输导等成藏条件,阐述了生物气晚期聚集成藏条件的时空匹配关系.指出自第四纪以来,生物气源岩持续高效的产气作用是生物气成藏的物质保障,气藏的形成是生物气连续的补充大于逸散动态平衡的产物;背斜构造、砂岩上倾尖灭和砂岩透镜体圈闭是该区主要的圈闭类型;断裂和不整合面是沟通生物气源岩到圈闭的垂向和侧向输导通道,茨营组的连通砂岩体是生物气近距离运移的输导层.蔡家冲组大套湖相暗色泥岩的生物产气效率、断裂的垂向输导能力和圈闭的保存条件及其在时空上的动态配置是生物气晚期成藏的主控因素.     

Carbon and oxygen isotopic composition of car- bonate cements of different phases in terrigenous siliciclastic reservoirs and significance for their origin： A case study from sandstones of the Triassic Yanchang Formation, southwestern Ordos Basin, China

Early carbonate cements in the Yanchang Formation sandstones are composed mainly of calcite with relatively heavier carbon isotope （their δ^18O values range from -0.3‰- -0.1‰） and lighter oxygen isotope （their δ^18O values range from -22.1‰- -19.5‰）. Generally, they are closely related to the direct precipitation of oversaturated calcium carbonate from alkaline lake water. This kind of cementation plays an important role in enhancing the anti-compaction ability of sandstones, preserving intragranular volume and providing the mass basis for later disso- lution caused by acidic fluid flow to produce secondary porosity. Ferriferous calcites are characterized by relatively light carbon isotope with δ^13C values ranging from -8.02‰ to -3.23‰, and lighter oxygen isotope with δ^18O values ranging from -22.9‰ to -19.7‰, which is obviously related to the decarboxylation of organic matter during the late period of early diagenesis to the early period of late diagenesis. As the mid-late diagenetic products, ferriferous cal- cites in the study area are considered as the characteristic authigenic minerals for indicating large-scaled hydrocarbon influx and migration within the clastic reservoir. The late ankerite is relatively heavy in carbon isotope with δ^13C values ranging from -1.92‰ to -0.84‰, and shows a wide range of variations in oxygen isotopic composition, with δ^18O values ranging from -20.5‰ to -12.6‰. They are believed to have nothing to do with decarboxylation, but the previously formed marine carbonate rock fragments may serve as the chief carbon source for their precipitation, and the alkaline diagenetic environment at the mid-late stage would promote this process.     

The distribution and geological significance of carbazole compounds in Silurian paleo-pools of the Tarim Basin,Northwest China

The results presented in this paper indicated that the carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has high concentrations and a complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in the study of hydrocarbon migration of the paleo-pools. The difference in the contents of nitrogen compounds in the Silurian dry asphalts from the Awati, Tabei and Tazhong areas is attributed to the difference in the extent of oxidation and （or） bio-degradation for the areas; the Awati and Tabei areas underwent relatively strong oxidation and bio-degradation. During the first stage of hydrocarbon pool formation in the Silurian system in the Tazhong and Tabei areas of the Tarim Basin （at the end of the Silurian period） and at the second stage in the Awati area （in Permian）, the hydrocarbons experienced a long-distance migration.     

The characteristics and sources of natural gases from Ordovician weathered crust reservoirs in the Central Gas Field in the Ordos Basin

The Central Gas Field is a famous large-sized gas field in the Ordos Basin of China. However, identification of main gas sources of the Ordovician reservoirs in this gas field remains puzzling. On the basis of a lot of geochemical data and geological research on natural gases, the characteristics and sources of natural gases from Ordovician weathered crust reservoirs in the Central Gas Field in the Ordos Basin were studied. The results indicated that natural gases from Ordovician weathered crust reservoirs in the Central Gas Field in the Ordos Basin have similar chemical and isotopic compositions to highly mature and over-mature dry gases. Both coal-derived gases and oil-type gases coexist in the Central Gas Field in the Ordos Basin. The former was derived mainly from Carboniferous-Permian coal measures and the latter from Lower Paleozoic marine carbonates. It is suggested that coal-derived gases occur in the eastern part of the Central Gas Field while oil-type gases may be produced mainly in the northern, western and southern parts of the Central Gas Field in the Ordos Basin.     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

Petroleum Migration Direction of the Silurian Paleo-pools in the Tarim Basin, Northwest China

The results obtained in this paper indicate that carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has a high concentration and complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in studying petroleum migration of paleo-pool. During the basin＇s first-stage of oil-gas pool formation in the Silurian in Tazhong and Tabei areas of Tarim Basin （at the end of Silurian period） and the second-stage in the Awati area （in Permian）, the petroleum experienced a long-distance migration. During the formation of the Silurian paleo-pools in Tazhong Uplift at the end of Silurian, the petroleum mainly came from the lower and middle Cambrian source rocks in the Manjiaer sag. The petroleum migrated towards the southwest-south entering the Silurian reservoir beds in Tazhong first. Then, it further migrated within Silurian from northwest to southeast along the highs of the Structural Belts to the region of the Silurian pinchout boundary in Tazhong. In Tabei Uplift, during the first-stage of pool formation, the petroleum was also from the lower and middle Cambrian source rocks in the Manjiaer sag. It migrated northwest entering the Silurian reservoir beds in the Tabei Uplift firstly, and then the migration continued in the same direction within the Silurian reservoirs and finally the petroleum was trapped in higher positions. During the second-stage pool formation in the Silurian beds in the areas around Awati sag, the petroleum mainly came from the lower-middle Cambrian source rocks in the Awati sag. The petroleum migrated from the generation center to Silurian reservoirs in all directions around the sag through major paths, and the petroleum was finally trapped in higher locations.