使用简易测试平台检测马哈克扭力仪的性能

本文描述简易测试平台的原理与制作，对马哈克MAIHAK MDS－820型扭力仪检测模拟负载的准确性进行探讨。     

有风浪太湖水体的光照传输模式

根据辐射传输方程的近似解方法和光照传输的累加原理,建立了包括水面风浪效应、水中悬浮粒多次散射和底泥反射的垂直分层水体的光照传输数值模式。利用该模式和太湖悬浮粒实测资料,计算和讨论了太湖水体中光照随水深的变化以及悬浮粒浓度、风浪和太阳高度的影响。结果表明,悬浮粒的多次散射所形成的漫射光是湖水中光照不可忽视的重要部分。在水体的下层,漫射光甚至是光照的主要构成部分。风浪对水中光照的影响则主要在天顶角大于70°时才明显地表现出来,此时风浪水体对太阳直接辐射和全辐射的反射率比平静水面都有明显的减小。     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.     

Model Test of Sand Restraining Force on Pipeline

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.     

三传感器波浪水槽二次反射主动吸收方法

三传感器波浪水槽二次反射主动吸收方法是加拿大科学院水力中心最近开发的一种水槽反射波控制技术。该法在造波板前 1～ 2倍波长处布置 3个传感器 ,通过入反射波分离方法得到准确的入反射波参数 ,以此调整造波信号 ,有效地吸收由建筑物反射回到造波板的二次反射波。文中在分析波浪水槽二次反射吸收方法研究现状的基础上 ,介绍了加拿大水力中心对现有方法的改进及其效果     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Model Test Study of Dynamic Ice Force on Compliant Conical Structures

To study ice-induced vibration of a compliant conical structure,a series of model tests were performed from 2004 to 2005.In the tests,the ice sheet before the compliant conical structure was found to fail in two-time breaking.From 2005 to 2006,this type of ice failure was studied through more groups of tests.The tests show that two-time breaking is the typical failure of ice before steep conical structures,and is controlled by other factors at the same time,such as ice speed and the angle of the cone.     

黄骅电厂取水河段取水特性的数模与物模研究

本文采用数值模拟与物模试验相结合的研究方法，详细地研究了黄骅电厂一、二、三期工程的取水特性。结果表明，现有河道只能满足电厂一期工程的取水需求；若将现有河道进行适当开挖，可以满足电厂三期取水需要。     

向阳圩海塘围堰堤坝沉降特性原位实测及稳定性分析

以上海市向阳圩海塘围堰主堤为工程背景，在大量原位实测的基础上通过对各测试结果的统计分析研究了软土海滩围堰堤坝及地基沉降位移特性。结果表明：围堰堤坝及地基沉降具有显著的时效特性，沉降与时间的相关关系可用负指数时效特性曲线拟合；各测点位移值随时间具有明显突变变化，整个沉降时域可分为快速沉降时域区及缓慢沉降时域区。同时，在充分考察了沉降速率随时间变化特性的前提下提出了用该参量预测堤坝稳定时间及最终沉降位移的建议。     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.