基于无人机多源遥感数据海岛植被叶面积指数协同反演研究

无人机多源遥感数据的获取、融合以及应用是当今研究的热点和难点。文中以城洲岛为例,针对海岛特殊的地理生态环境,获取无人机多源遥感数据。结合无人机多光谱遥感数据定量分析各遥感植被指数与植被叶面积指数(Leaf Area Index, LAI)的响应关系,构建单因子遥感反演模型;基于无人机激光LiDAR点云提取海岛植被冠层高度模型(Canopy Height Model,CHM),并将其作为自变量引入到多源统计回归分析中,从而构建多源遥感数据协同反演模型,对区域尺度下海岛叶面积指数(LAI)进行估算,开展验证和精度评价。结果显示,加入植被冠层高度因子的协同反演模型的判定系数R2为0.92,绝对平均误差系数为12.29%,预测精度要优于单因子反演模型(判定次数R2为0.86,绝对平均误差系数19.95%)。研究表明,加入了植被冠层高度因子的协同反演模型能在一定程度上提高乔木植被LAI的预测精度。实践证明,无人机多源遥感技术在生态学定量研究中具有巨大的潜力和广阔的应用前景。     

Fine-resolution simulation of surface current and sea ice in the Arctic Mediterranean Seas

A fine-resolution model is developed for ocean circulation simulation in the National Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics (LASG), Chinese Academy of Sciences, and is applied to simulate surface current and sea ice variations in the Arctic Mediterranean Seas. A dynamic sea ice model in elastic-viscous-plastic rheology and a thermodynamic sea ice model are employed. A 200-year simulation is performed and a dimatological average of a 10-year period (141st-150th) is presented with focus on sea ice concentration and surface current variations in the Arctic Mediterranean Seas. The model is able to simulate well the East Greenland Current, Beaufort Gyre and the Transpolar Drift, but the simulated West Spitsbergen Current is small and weak. In the March climatology, the sea ice coverage can be simulated well except for a bit more ice in east of Spitsbergen Island. The result is also good for the September scenario except for less ice concentration east of Greenland and greater ice concentration near the ice margin. The extra ice east of Spitsbergen Island is caused by sea ice current convergence forced by atmospheric wind stress.     

新版建筑工程建筑面积计算规范应用探讨

GB/T 50353-2013建筑工程建筑面积计算规范于2014年7月1日开始实施,该规范是在总结原有规范基础上进行修订的,目前,新规范实施已经一年多了,依据新规范审批的建设工程陆续进入验收阶段,因此,在建筑面积测量中如何正确用好新规范显得尤为重要。本文就新规范的技术要点进行分析,以便于技术人员和管理人员正确使用新规范。     

一种天绘一号卫星影像精确定位方法

针对如何最大程度地减小天绘一号卫星RPC模型系统误差,真实反映像方坐标与物方坐标关系的问题,该文介绍了天绘一号卫星的基本情况及相应的RPC参数模型,给出了求解RPC参数的基本方法和流程。结合天绘一号卫星采用等效框幅式光束法平差进行无控定位的特点,利用平差后计算得到的加密点坐标,提出了一种基于像点仿射变换的RPC模型区域网平差方法,并进行了RPC参数修正。经天绘一号卫星精度检测实验表明,修正后的RPC参数能有效地弥补系统性误差,具有更高的定位精度。     

FBX三维模型自动转换为OBJ三维模型方法研究

本文研究实现了一种FBX三维模型自动转换为OBJ三维模型的方法,包括几何信息和材质信息的自动转换,所述方法包括获取数据、几何信息处理、材质信息处理、OBJ格式输出和材质库文件输出等步骤。     

DEM高程基准转换方法及应用

随着数字高程模型(DEM)在电力行业的广泛应用,电力地图需求部门对数字高程模型的要求越来越高.针对在数字高程模型生产中,电力业主方提供的立体模型高程基准不统一的问题,本文提出了基于特征数据的DEM基础转换方法.该方法在进行DEM制作过程中采用先采集特征数据,后转换特征数据高程基准的方式,实现了DEM成果的高程基准的转换...     

Effects of detailed soil spatial information on watershed modeling across different model scales

Hydro-ecological modelers often use spatial variation of soil information derived from conventional soil surveys in simulation of hydro-ecological processes over watersheds at mesoscale (10–100 km²). Conventional soil surveys are not designed to provide the same level of spatial detail as terrain and vegetation inputs derived from digital terrain analysis and remote sensing techniques. Soil property layers derived from conventional soil surveys are often incompatible with detailed terrain and remotely sensed data due to their difference in scales. The objective of this research is to examine the effect of scale incompatibility between soil information and the detailed digital terrain data and remotely sensed information by comparing simulations of watershed processes based on the conventional soil map and those simulations based on detailed soil information across different simulation scales. The detailed soil spatial information was derived using a GIS (geographical information system), expert knowledge, and fuzzy logic based predictive mapping approach (Soil Land Inference Model, SoLIM). The Regional Hydro-Ecological Simulation System (RHESSys) is used to simulate two watershed processes: net photosynthesis and stream flow. The difference between simulation based on the conventional soil map and that based on the detailed predictive soil map at a given simulation scale is perceived to be the effect of scale incompatibility between conventional soil data and the rest of the (more detailed) data layers at that scale. Two modeling approaches were taken in this study: the lumped parameter approach and the distributed parameter approach. The results over two small watersheds indicate that the effect does not necessarily always increase or decrease as the simulation scale becomes finer or coarser. For a given watershed there seems to be a fixed scale at which the effect is consistently low for the simulated processes with both the lumped parameter approach and the distributed parameter approach.     

基于组件的地理信息系统的研究与开发

详细阐述了基于组件GIS的技术基础及其特点,区别了两种形式的组件式GIS,给出了基于接口的组件式GIS的开发方式。以重庆市柑橘生产信息管理系统开发为例,论述了用ArcGIS 8的ArcObjects提供的COM组件进行系统开发的方法。将该系统与传统的GIS系统相比,阐述了它在系统开发、系统扩展和系统集成等方面所体现的优点。     

基于SPOT 5异轨立体像对提取DEM试验与精度评估

介绍了异轨立体像对提取DEM的基本原理和数据处理流程,利用两景影像进行了DEM提取试验,分析了结果的精度,提出了利用卫星立体影像提取DEM这一方法的发展方向。     

基于等高线的DEM生成算法研究和实现

数字高程模型是近年来发展起来的为地理信息系统提供空间分析和辅助决策的数据基础。随着科学技术特别是计算机技术的迅速发展，DEM在数据获取方法、数据存储和数据处理速度等方面已经取得突破性进展。通过系统介绍生成DTM过程中等高线的离散化方法，DELAUNAY三角网的特性和基于等高线数据的TIN的建立，以及对产生的问题的一些解决方法。