Interference of Multiple Strip Footings on Sand Using Small Scale Model Tests

By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to (i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data, however, indicates much greater effect of interference especially for larger spacing among footings.     

Modelling and forecasting long-term dynamics of Western Baltic macrobenthic fauna in relation to climate signals and environmental change

Long-term macrobenthos data from Kiel Bight in the Western Baltic collected between 1968 and 2000 have been correlated with the winter NAO index (North Atlantic Oscillation Index) and other environmental data such as temperature, salinity and oxygen content in the bottom water in order to detect systematic patterns related to so far unexplained abiotic signals in the dynamics of zoobenthic species assemblages. The benthos data come from a cluster of five stations (Süderfahrt/ Millionenviertel) in Kiel Bay. Our investigations concentrated on the macrobenthic dynamics with a focus on the number of species m^− 2 (species richness). Using logarithms and the time series analysis approach of Box/Jenkins (ARIMA modelling, transfer function modelling) it was shown that species richness was strongly influenced by the winter NAO (adjusted for a linear time trend within the 1968-2000 period) and salinity (with a shift/lag of four years). Bootstrapping experiments (i.e. sampling from the error process) and analysis of prediction power (by means of the one- or more-years leaving-out method) showed that the parameter estimates behaved in a stable way, leading to a relatively robust model.     

Developing a Marine Information System by Integrating Existing Ocean Models Using Object-Oriented Technology

Information systems developed for different applications within the environmental domain have common characteristics, which can potentially be abstracted for sharing and reuse of design and software modules. This article presents an approach to designing for reuse by abstracting commonalities in the design of a Marine Information System (MIS), facilitating data management in a prototype operational monitoring, forecasting, and management system for the North Atlantic and the Nordic Seas. A detailed study of the requirements and data analysis was carried out, and Object-Oriented Technology (OOT) is employed to encapsulate abstractions and to promote reuse of code and design. This article identifies the Object-Oriented Frameworks (OOFW) required to build the MIS. It also provides guidelines to environmental scientists for restructuring legacy software and employing modern programming techniques.     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Evaluation of long-term extreme response statistics of jack-up platforms

This paper is concerned with the models appropriate for the dynamic assessment of jack-ups, concentrating particularly on the long-term response due to random ocean waves and on work-hardening plasticity models used for spud-can response. A methodology for scaling of short-term statistics, calculated using a Constrained NewWave technique, is shown in a numerical experiment for an example jack-up and central North Sea location. The difference in long-term extreme response statistics due to various footing assumptions is emphasised. Results for two environmental load conditions are described (one excluding and one including wind and current effects) and the role of sea-state severity in the variation of short-term extreme response statistics is also highlighted.     

Data assimilation for a coastal area morphodynamic model: Morecambe Bay

This paper investigates the use of data assimilation in coastal area morphodynamic modelling using Morecambe Bay as a study site. A simple model of the bay has been enhanced with a data assimilation scheme to better predict large-scale changes in bathymetry observed in the bay over a 3-year period. The 2DH decoupled morphodynamic model developed for the work is described, as is the optimal interpolation scheme used to assimilate waterline observations into the model run. Each waterline was acquired from a SAR satellite image and is essentially a contour of the bathymetry at some level within the inter-tidal zone of the bay. For model parameters calibrated against validation observations, model performance is good, even without data assimilation. However the use of data assimilation successfully compensates for a particular failing of the model, and helps to keep the model bathymetry on track. It also improves the ability of the model to predict future bathymetry. Although the benefits of data assimilation are demonstrated using waterline observations, any observations of morphology could potentially be used. These results suggest that data assimilation should be considered for use in future coastal area morphodynamic models.     

Experimental investigation on a two-part underwater towed system

An experimental set-up is developed and proved to be effective for laboratory study of an underwater towed system. The experimental technique gives a practical method for monitoring the kinematic and dynamic performance of an underwater towed system in a ship towing tank. Both the theoretical and experimental results in the investigation indicate that the hydrodynamic response of a towed vehicle to the wave induced motion of a towing ship can be significantly reduced by applying a two-part tow method. A comparison of the numerical and experimental results in the investigation demonstrates that the numerical simulation results are close to the experimental data, overall agreement between experimental and theoretical results is satisfactory. The results qualitatively verify the mathematical model of a two-part underwater towed system proposed by Wu and Chwang [Wu, J., Chwang, A.T., 2000. A hydrodynamic model of a two-part underwater towed system. Ocean Engineering 27 (5), 455–472].     

用Matlab中的Neural Network Toolbox仿真赤道东太平洋SST的预报模型

基于ＮＣＥＰ／ＮＣＡＲ再分析资料和ＣＯＡＤＳ海洋资料中的全球月平均海平面气压场、８５０hPa纬向风场及海洋温度场，利用Ｍatlab中的Ｎeural Network Toolbox仿真环境和ＢＰ模型改进算法比较准确地仿真和反演出了南方涛动指数、赤道纬向风指数和滞后的赤道东太平洋海温之间的动力结构和预报模型。该模型具有很好的拟合精度和可行的预报效果。可在一定时效内预测赤道东太平洋月平均海温的变化趋势。由于所建系统是具有直接因果关系的预报模型，因此不仅可直接用于预测，而且可有效避免类拟非线性微分方程组在积分过程中由于对初值敏感性而可能产生的对预报结果的不确定性。