Management of the commons for biodiversity: lessons from the North Pacific

The North Pacific has the world's largest groundfish fisheries, with a value in excess of $1 billion annually. The North Pacific also is home to the largest population of Steller sea lions (SSL), an ancient species that is now endangered. Decline of the western stock of SSL in the 1970–1990s coincided with the US nationalization and exponential growth in the Gulf of Alaska and Bering Sea/Aleutian Islands groundfish fishery.The article treats five aspects of the competition between the fishery and protection of the endangered species. First, we analyze competition of interests in the use, management, and preservation of the North Pacific commons, including offshore and near-shore fisheries, environmental organizations, governments (federal, state, and local), and the scientific community. Second, the article compares and contrasts provisions of the National Environmental Policy Act, the Marine Mammal Protection Act, the Endangered Species Act, and the Magnuson–Stevens Act (as amended in 1996 by the Sustainable Fisheries Act).Third, we examine the regulatory environment with a focus on the National Marine Fisheries Service (NMFS) and its relationship to the North Pacific Fishery Management Council. We illustrate how NMFS establishes fishery management plans and the methods, such as crafting biological opinions and environmental-impact-statements, it uses to resolve conflicts. Fourth, we investigate how the dual pressures on the agency—to increase fisheries production for the benefit of the industry and to preserve endangered marine species—have affected its culture (behavioral norms and operational codes). Then, the article explains agency changes in terms of crises, competition among affected interests, and development of new scientific knowledge.The article concludes by drawing lessons from the SSL controversy in the North Pacific which may pertain to national and global biodiversity conflicts. These concern the role of law in biodiversity protection, the role of science, and agency capacity for change.     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Integration of a Multi-Stage Bulk Materials Acquisition System from the Viewpoint of Dock Operations

A multi-stage bulk materials acquisition system is examined from the viewpoint of dock operations. The whole process can be divided into four stages and treated as four subsystems: ships scheduling planning, material yard planning, dock arrangement, and material discharging. Since the structure and the complexity of each subsystem is different, the solution approaches applied are also different with respect to each. To increase operations efficiency and data consistency, an integration of the subsystems by coordinating the operations sequence and data communications for the four subsystems is discussed. The four subsystems are illustrated by using the material docks of China Steel Corporation, and the models developed in this research are also validated. The results indicate that the models developed are capable of deriving solutions better than the existing ones. Although the discussions are confined to China Steel Corporation, the models can be applied to other companies with similar operations.     

半潜式超大浮体连接器动力特性的一种时间序列分析方法

根据刚性模块弹性连接器 (RMFC)假设研究由 3个模块连接而成的半潜式超大浮体MobileOffshoreBase(MOB)的波浪载荷动力响应。模块和连接器动力响应根据时间序列法计算 ,这种方法包括海况模拟 ,波浪载荷计算和结构响应计算三个主要部分。通过对结构的适当简化 ,根据Airy波理论 ,Morrison公式以及流体中的结构运动方程、弹性连接器变形方程 ,计算求得MOB在不规则海况下的动力响应 ,并将其与相关文献中的结果进行比较 ,表明该方法有良好的精确性     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Evaluation of long-term extreme response statistics of jack-up platforms

This paper is concerned with the models appropriate for the dynamic assessment of jack-ups, concentrating particularly on the long-term response due to random ocean waves and on work-hardening plasticity models used for spud-can response. A methodology for scaling of short-term statistics, calculated using a Constrained NewWave technique, is shown in a numerical experiment for an example jack-up and central North Sea location. The difference in long-term extreme response statistics due to various footing assumptions is emphasised. Results for two environmental load conditions are described (one excluding and one including wind and current effects) and the role of sea-state severity in the variation of short-term extreme response statistics is also highlighted.     

Data assimilation for a coastal area morphodynamic model: Morecambe Bay

This paper investigates the use of data assimilation in coastal area morphodynamic modelling using Morecambe Bay as a study site. A simple model of the bay has been enhanced with a data assimilation scheme to better predict large-scale changes in bathymetry observed in the bay over a 3-year period. The 2DH decoupled morphodynamic model developed for the work is described, as is the optimal interpolation scheme used to assimilate waterline observations into the model run. Each waterline was acquired from a SAR satellite image and is essentially a contour of the bathymetry at some level within the inter-tidal zone of the bay. For model parameters calibrated against validation observations, model performance is good, even without data assimilation. However the use of data assimilation successfully compensates for a particular failing of the model, and helps to keep the model bathymetry on track. It also improves the ability of the model to predict future bathymetry. Although the benefits of data assimilation are demonstrated using waterline observations, any observations of morphology could potentially be used. These results suggest that data assimilation should be considered for use in future coastal area morphodynamic models.     

移动式海上基地(MOB)连接器动力响应试验研究

移动式海上基地(Mobile Offishore Base，MOB)是由若干半潜模块相连而成的超大型浮式结构物。在进行海上作业时，模块间的连接器将会产生巨大的载荷。用缩尺比为1：100的三模块MOB模型在实验室进行了连接器动力响应试验研究。文中对试验的关键问题，如连接器模型的设计、制作、安装、试验工况的确定和测试方法等作了较详细的介绍。     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

Code of Practice For Ocean Mining: An International Effort to Develop a Code For Environmental Management of Marine Mining

A code of practice for ocean mining has been developed by the International Marine Minerals Society. The code provides general guiding Principles for development of marine mineral resources and delineates Operating Guidelines for application, as appropriate, at specific mining sites. In total 11 operating guidelines are provided to serve as benchmarks for industry and targets for regulatory agencies and other stakeholders. They include the following commitments: •To sustainable development, •To environmentally responsible corporate ethics, •To the development of effective community partnership, •To implementation of environmental risk management, •To the integration of environmental management into all phases of development, •To the establishment of corporate environmental performance targets, •To timely environmental improvements and upgrading, •To responsible rehabilitation of operations sites and decommissioning of facilities, and •To accurate and timely, reporting and documentation, archiving, and performance review.