罗布泊地区凝结水对潜卤水资源量评价的影响分析

新疆罗布泊地区属于极端干旱气候地区,大气降水对地下水的补给极其有限,长期以来,众多学者认为凝结水量是罗布泊干盐湖潜卤水的重要补给来源之一。本次通过在罗北凹地地区开展的凝结水试验,较准确地计算了其补给资源量,指出尽管研究区凝结水总生成量较大,但真正能入渗补给到潜卤水饱水带的量却极少,绝大多数凝结水都以难以开发利用的土壤水形式短暂保存,被蒸发散失到大气中,对潜卤水资源量评价影响较小。     

Diffusion of divalent cations in garnet: multi-couple experiments

We demonstrate the possibility of studying several diffusion couples in a single run, i.e. under almost similar P–T–t– conditions, allowing direct comparison of the diffusion rates in different diffusion couples. Thus the duration of experimental study and the risk of failure of expensive experimental equipment can be decreased considerably. The diffusion experiments were carried out in piston-cylinder apparatus. Gem-quality garnets of almandine, spessartine and grossular compositions together with inclusion-rich eclogitic garnets were embedded in a powder of natural pyrope and annealed together under dry conditions at P = 1.9–3.2 GPa and T = 1,070–1,400°C. Diffusion profiles were measured by electron microprobe and fitted numerically on the basis of multicomponent diffusion theory. The datasets derived from different diffusion couples yields parameters of the Arrhenius equation for Ca, Mg and Fe in natural eclogitic garnets and Mg, Mn and Fe in gem-quality garnets. We have also studied the effect of grain-boundary diffusion in the sintered pyrope matrix on interdiffusion on the basis of 2D modeling. Under conditions analogous to those of our experimental runs, we show that observed irregularities in some measured diffusion profiles (not applied for the diffusion modeling) can be directly related to the superposition of local grain-boundary diffusion on dominant volume diffusion.     

11 Å tobermorite from cement bypass dust and waste container glass: A feasibility study

A novel one-step hydrothermal synthesis of 11 Å tobermorite, a cation exchanger, from a unique combination of waste materials is reported. 11 Å tobermorite was prepared from stoicheiometric quantities of cement bypass dust and waste container glass at 100 °C in water. The product also comprised 10 wt.% calcite and trace quartz as residual parent phases from the cement bypass dust. In a batch sorption study at 20 °C the uptakes of Cd²⁺ and Pb²⁺ by the waste-derived tobermorite product were found to be 171 mg g^− 1 and 467 mg g^− 1, respectively, and in both cases the removal process could be described using a simple pseudo-second-order rate model (k₂ = 2.30 × 10^− 5 g mg^− 1 min^− 1 and 5.09 × 10^− 5 g mg^− 1 min^− 1, respectively). The sorption characteristics of the 11 Å tobermorite are compared with those of other waste-derived sorbents and potential applications are discussed.     

养殖海鲡肌肉的生化组成

对海鲡肌肉的营养成分含量及氨基酸、脂肪酸、无机质组成进行了研究，结果表明，海鲡的蛋白质和脂肪含量分别为21.5%和5.5%，必需氨基酸和鲜味氨基酸分别占氨基酸总量的40.9%和37.8%，不饱和脂肪酸占脂肪酸总量的65.2%，其中C205和C226的含量分别为4.5%和12.0%，3.4kg阶段的养殖海鲡肌肉的必需氨基酸和呈味氨基酸的比率最高。     

矿物白度的影响因素与增白机理研究

白度是矿物的重要光学性质之一。为了深化矿物的光学性质及白色矿物功能材料的研究与应用,根据测试分析结果和叶大年的结构光性矿物学理论,系统研究了影响矿物白度的主要因素,以及矿物增白效果的差异性及其产生机理。研究结果表明:(1)晶体化学是决定不同种类透明矿物白度的最主要因素,但对于某种透明矿物来说,影响其白度的主要因素是矿物中的碳质有机质、含铁钛矿物杂质、杂质元素的价态与晶体化学环境、介质环境、矿物中的水和粒度大小等。(2)证明了透明矿物白度大小与折射率呈正相关。白度相同的不同矿物的增白效果存在很大差异性,其根本原因是由矿物折射率所决定的反射率存在很大差别。(3)提出了真白度和假白度的概念,即主要由自色产生的白度称为真白度,主要由假色产生的白度称为假白度;真白度高的矿物具有增白作用,而真白度低的矿物,即使粉末白度高,也没有增白作用。(4)在影响矿物白度的主要因素中,矿物中的碳质有机质、含铁钛矿物杂质、杂质元素的价态等杂质成分对矿物白度和增白效果起负面作用。(5)矿物中与晶体结构相关的水所产生的颜色属于自色,脱去结晶水、层间水和结构水都有利于提高矿物的真白度或增白效果,但脱去沸石水的效果正好相反;由矿物粒度大小变化产生的颜色属于假色;通过降低粉体粒度大小所提高的白度属于假白度,由此增加的白度没有增白作用。另外,矿物粉体与使用介质之间的折射率大小差别越大,增白效果越明显。     

X射线衍射-扫描电镜等技术研究秘鲁铜硫矿石选矿工艺矿物学特征

秘鲁铜硫矿石的主要回收对象是铜和硫矿物,由于铜矿物嵌布复杂、粒度过细以及与各种脉石矿物或金属矿物交生关系紧密,利用传统工艺矿物学研究方法如化学分析、光学显微镜检测等较难准确定量其工艺矿物学参数。本文采用化学分析、X射线衍射、扫描电镜、偏光显微镜及矿物参数自动分析系统(MLA)等技术手段,研究秘鲁铜硫矿石的化学成分、矿物组成和主要矿物的嵌布特征、粒度分布及单体解离特性等,并对影响选矿指标的主要矿物学因素进行分析。结果表明:矿石中主要元素为Cu(0.65%)和S(9.53%)。矿石中黄铁矿(16.57%)含量较高,形态较为规则,与其他矿物之间的交生关系相对简单,粒度普遍偏粗,其中粒径大于0.30mm的黄铁矿占95.06%。铜矿物主要以不规则粒状、皮壳状、网脉状、纤维状、尘粒状、斑点状分布于脉石中或与黄铁矿、闪锌矿、磁铁矿等金属矿物交生紧密,粒度极不均匀,使得铜矿物解离难度加大,且矿石中云母(12.51%)、绿泥石(3.74%)、滑石(3.34%)、高岭石、蒙脱石(3.59%)等黏土质矿物含量较高,在磨矿过程中易发生泥化从而恶化分选环境。根据该类型矿石的工艺矿物学特性,本文建议采用"粗磨-部分优先浮铜-铜硫混浮-混合精矿再磨再选分离"的工艺流程,可得到质量高的铜、硫精矿。     

功能性Fe3O4磁纳米粒子的合成

本研究以PNIPAM(聚N-异丙基丙烯酰胺)为单体,先制备出来Fe3O4@SiO2纳米颗粒,再与DMP(十二烷基三硫代碳酸酯)链转移剂进行酯化反应,制备的产物作为新的链转移剂,在偶氮二异丁腈为引发剂的条件下,利用可逆加成-断裂链转移自由基聚合(RAFT)活性聚合法制备温度响应性磁纳米粒子。通过红外光谱法、核磁共振法对聚合物的结构进行表征,谱图表明成功地合成出所需的产物。通过扫描电镜对其进行分析,所得到的Fe3O4@SiO2-PNIPAM聚合物纳米颗粒分布比较均匀。     

Paleoproterozoic volcanic rocks in the southern margin of the North China Craton,central China:Implications for the Columbia supercontinent

The volcanic rocks of the Xiong'er Group are situated in the southern margin of the North China Craton(NCC).Research on the Xiong er Group is important to understand the tectonic evolution of the NCC and the Columbia supercontinent during the Paleoproterozoic.In this study,to constrain the age of the Xiong'er volcanic rocks and identify its tectonic environment,we report zircon LA-ICP-MS data with Hf isotope,whole-rock major and trace element compositions and Sr-Nd-Pb-Hf isotopes of the volcanic rocks of the Xiong'er Group.The Xiong'er volcanic rocks mainly consist of basaltic andesite,andesite.dacite and rhyolite,with minor basalt.Our new sets of data combined with those from previous studies indicate that Xiong'er volcanism should have lasted from 1827 Ma to 1746 Ma as the major phase of the volcanism.These volcanics have extremely low MgO.Cr and Ni contents,are enriched in LREEs and LILEs but depleted in HFSEs(Nb,Ta,and Ti),similar to arc-related volcanic rocks.They are characterized by negative zircon ε_(Hf)_(t) values of-17.4 to 8.8,whole-rock initial ~(87)Sr/~(86)Sr values of 0.7023 to 0.7177 andε_(Nd)(t) values of-10.9 to 6.4.and Pb isotopes(~(206)Pb/~(204)Pb =14.366-16.431,~(207)Pb/~(204)Pb =15.106-15.371,~(208)Pb/~(204)Pb= 32.455-37.422).The available elemental and Sr-Nd-Pb-Hf isotope data suggest that the Xiong'er volcanic rocks were sourced from a mantle contaminated by continental crust.The volcanic rocks of the Xiong'er Group might have been generated by high-degree partial melting of a lithospheric mantle that was originally modified by oceanic subduction in the Archean.Thus,we suggest that the subduction-modified lithospheric mantle occurred in an extensional setting during the breakup of the Columbia supercontinent in the Late Paleoproterozoic,rather than in an arc setting.     

An integrated ore prospecting model for the Nyasirori gold deposit in Tanzania

The Nyasirori gold deposit, located in the middle-western end of the Musoma-Mara Archean greenstone belt in Tanzania, is a tectonic altered rock type gold deposit controlled by shear tectonic zone. This work conducted high-precision ground magnetic measurements to delineate fault structures and favorable prospecting targets, utilized induced polarization (IP) intermediate gradient to roughly determine the distribution and extension of the tectonic altered zone and gold ore (mineralized) bodies, and further carried out IP sounding and magnetotelluric sounding to locate the tectonic altered zone and gold ore (mineralized) bodies. The anomalous gradient belt of the combination of positive and negative micromagnetic measurements reflects the detail of shallow surface tectonic alteration zone and gold mineralization body. Micromagnetic profile anomalies indicate the spatial location and occurrence of concealed tectonic alteration zone and gold (mineralized) ore bodies. Soil geochemical measurements indicate that the ore-forming element Au correlates well with As and Sb, and As and Sb anomalies have a good indication to gold orebodies. Based on the multi-source geological-geophysical-geochemical information of the Nyasirori gold deposit, this work established an integrated prospecting model and proposed a set of geophysical and geochemical methods for optimizing prospecting targets.     

Concealed porphyry delineation based on nonlinear three-dimensional density-difference inversion: An example in the Beiya mine area,Western Yunnan,China

Intermediate acid-complex rock masses with low-density characteristics are the most important prospecting sign in the Beiya area, of western Yunnan province, and provide a physical basis for good gravity exploration. It is usually difficult to obtaining solutions in connection with actual geological situations due to the ambiguity of the conventional gravity-processing results and lack of deep constraints. Thus, the three-dimensional (3D) inversion technology is considered as the main channel for reducing the number of solutions and improving the vertical resolution at the current stage. The current study starts from a model test and performs nonlinear 3D density-difference inversion called “model likelihood exploration”, which performs 3D inversion imaging and inversion of the known model while considering the topographic effects. The inversion results are highly consistent with those of the known models. Simultaneously, we consider the Beiya gold mine in Yunnan as an example. The nonlinear 3D density-difference inversion technology, which is restricted by geological information, is explored to obtain the 3D density body structure below 5 km in the mine area, and the 3D structure of the deep and concealed rock masses are obtained using the density constraints of the intermediate-acid-complex rock masses. The results are well consistent with the surface geological masses and drilling-controlled deep geological masses. The model test and examples both show that the 3D density-difference nonlinear inversion technology can reduce inversion ambiguity, improve resolution, optimize the inversion results, and realize “transparency” in deeply concealed rock masses in ore-concentrated areas,which is useful in guiding the deep ore prospecting.