滇西水成铀矿勘探综合测井成果

滇西龙川江盆地发现水成铀矿。本文借助地球物理综合测井技术，对龙川江盆地水成铀矿的成矿规律作有益分析和探讨。重点论述滇西水成铀成矿的成矿（沉积）环境及其成矿物征。     

"2002.5.13"黔南暴雨天气过程分析

从环流形势特征、T213数值预报产品和雷达回波等方面对2002年5月13日黔南州暴雨天气过程进行了分析总结，得出暴雨天气的发生与高空槽、低涡切变系统的活动以及高、中、低层数值预报产品的有利配合密切相关。丰富的水汽输送、高层辐散和低层辐合的抽气机效应是暴雨产生的必要条件。     

吉林省大横路铜、钴矿床地质特征及控矿因素

大横路地区出露地层主要为元古界老岭群大栗子组和珍珠门组的低绿片岩相 -高绿片岩相到低角闪岩相的变质岩系 ,北部有少量英云闪长岩 -奥长花岗岩和表壳岩残块。侵入岩主要以燕山期基性 -中基性为主。铜钴矿床产于含碳绢云千枚岩中 ,矿体长 36 0～ 140 0m ,宽 95～ 80 0m ,厚 3～ 10 8.7m ,呈层状、似层状、分枝状 ,矿石以浸染状为主 ,次为脉状、网脉状。矿床属多期多成因类型 ,主要受大栗子组地层、北东向断裂构造和变质作用控制 ,并有岩浆热液的叠加。     

温和水热法制备MZr2(PO4)3(M=Na,K,Rb)

在温和的水热条件下分别制备出纯净的磷酸锆钠 [NaZr2 (PO4) 3 ]、磷酸锆钾 [KZr2 (PO4) 3 ]和磷酸锆铷 [RbZr2 (PO4) 3 ]。研究了原料配比、矿化剂 (氟离子 )、反应时间和温度等水热晶化条件对产物生成的影响。发现在较宽的温和水热条件下可以制得这三种磷酸锆盐 ;随着碱金属离子的增大 ,产物的生成条件越来越窄 ;最佳制备条件是 :F- ZrO2 =2、P2 O5 ZrO2 =3 (均为摩尔比 )、[ZrOCl2 ]=0 6mol L、反应温度 1 5 0℃、反应时间 2天。用水热法没有制备出同一系列磷酸锆盐中的磷酸锆锂 [LiZr2 (PO4) 3 ]和磷酸锆铯 [CsZr2 (PO4) 3 ]。采用XRD、SEM、IR、Raman和XPS等现代物化仪器对产物的结构与物相纯度进行了测定与表征     

云南腾冲-潞西金成矿带地质特征与成矿预测

腾冲-潞西金成矿带是云南省重要金成矿带之一。通过分析其地质特征，解剖矿带内典型金矿床，讨论矿带成矿模式及找矿方向，进而提出了矿带内两个重要矿化集中区(段)。     

桂东流源地区地球化学特征及找矿预测

通过对桂东县流源地区的成矿规律与地球化学特征进行了分析．区内矿脉主要受NE向断裂控制，地球化学异常有效地反映了各矿床点的分布．根据地球化学异常特征及控矿规律，分析了异常区的预测矿种及找矿意义，预测了两个多金属矿远景区，为区内找矿指明了方向．     

Effect of the chemical composition of the crust on the metamorphic evolution of orogenic wedges

Petrological data provide a good record of the thermal structure of deeply eroded orogens, and, in principle, might be used to relate the metamorphic structure of an orogen to its deformational history. In this paper, we present two‐dimensional thermal modelling of various subduction models taking into account varying wedge geometry as well as variation of density and topography with metamorphic reactions. The models clearly show that rock type accreted in the wedge has important effects on the thermal regime of orogenic wedges. The thermal regime is dominated by radiogenic heat production. Material having high radioactive heat production, like the granodioritic upper crust, produces high temperature metamorphism (amphibolitic conditions). Material with low radioactive heat production results in low temperature metamorphism of greenschist or blueschist types depending on the thickness of the wedge. Application of this model to seemingly unrelated areas of the Central Alps (Lepontine Dome, Grisons) and Eastern Alps (Tauern Window) explains the coexistence and succession of distinct Barrovian and blueschist facies metamorphic conditions as the result of a single, continuous tectonic process in which the main difference is the composition of the incoming material in the orogenic wedge. Accretion of the European upper continental crust in the Lepontine and Tauern Domes produces Barrovian type metamorphism while accretion of oceanic sediments results in blueschist facies metamorphism in the Valaisan domain.     

Contrasting metamorphic evolution of metasedimentary rocks from the Çine and Selimiye nappes in the Anatolide belt, western Turkey

Abstract P–T conditions, mineral isograds, the relation of the latter to foliation planes and kinematic indicators are used to elucidate the tectonic nature and evolution of a shear zone in an orogen exhumed from mid‐crustal depths in western Turkey. Furthermore, we discuss whether simple monometamorphic fabrics of rock units from different nappes result from one single orogeny or are related to different orogenies. Metasedimentary rocks from the Çine and Selimiye nappes at the southern rim of the Anatolide belt of western Turkey record different metamorphic evolutions. The Eocene Selimiye shear zone separates both nappes. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P–T conditions of about 7 kbar and >550 °C. Metasedimentary rocks from the overlying Selimiye nappe have maximum P–T conditions of 4 kbar and c. 525 °C near the base of the nappe. Kinematic indicators in both nappes are related to movement on the Selimiye shear zone and consistently show a top‐S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet‐chlorite zone at the base, the chloritoid‐biotite zone and the biotite‐chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional S_R foliation, parallel the Selimiye shear zone and indicate that the Selimiye shear zone formed during this prograde greenschist to lower amphibolite facies metamorphic event but remained active after the peak of metamorphism. ⁴⁰Ar/³⁹Ar mica ages and the tectonometamorphic relationship with the Eocene Cyclades–Menderes thrust, which occurs above the Selimiye nappe in the study area, suggests an Eocene age of metamorphism in the Selimiye nappe. Metasedimentary rocks of the Çine nappe 20–30 km north of the Selimiye shear zone record maximum P–T conditions of 8–11 kbar and 600–650 °C. An age of about 550 Ma is indicated for amphibolite facies metamorphism and associated top‐N shear in the orthogneiss of the Çine nappe. Our study shows that simple monophase tectonometamorphic fabrics do not always indicate a simple orogenic development of a nappe stack. Preservation in some areas and complete overprinting of those fabrics in other areas apparently occur very heterogeneously.     

Metamorphic petrology and zircon geochronology of high-grade rocks from the central Mozambique Belt of Tanzania: crustal recycling of Archean and Palaeoproterozoic material during the Pan-African orogeny

New data on the metamorphic petrology and zircon geochronology of high‐grade rocks in the central Mozambique Belt (MB) of Tanzania show that this part of the orogen consists of Archean and Palaeoproterozoic material that was structurally reworked during the Pan‐African event. The metamorphic rocks are characterized by a clockwise P–T path, followed by strong decompression, and the time of peak granulite facies metamorphism is similar to other granulite terranes in Tanzania. The predominant rock types are mafic to intermediate granulites, migmatites, granitoid orthogneisses and kyanite/sillimanite‐bearing metapelites. The meta‐granitoid rocks are of calc‐alkaline composition, range in age from late Archean to Neoproterozoic, and their protoliths were probably derived from magmatic arcs during collisional processes. Mafic to intermediate granulites consist of the mineral assemblage garnet–clinopyroxene–plagioclase–quartz–biotite–amphibole ± K‐feldspar ± orthopyroxene ± oxides. Metapelites are composed of garnet‐biotite‐plagioclase ± K‐feldspar ± kyanite/sillimanite ± oxides. Estimated values for peak granulite facies metamorphism are 12–13 kbar and 750–800 °C. Pressures of 5–8 kbar and temperatures of 550–700 °C characterize subsequent retrogression to amphibolite facies conditions. Evidence for a clockwise P–T path is provided by late growth of sillimanite after kyanite in metapelites. Zircon ages indicate that most of the central part of the MB in Tanzania consists of reworked ancient crust as shown by Archean (c. 2970–2500 Ma) and Palaeoproterozoic (c. 2124–1837 Ma) protolith ages. Metamorphic zircon from metapelites and granitoid orthogneisses yielded ages of c. 640 Ma which are considered to date peak regional granulite facies metamorphism during the Pan‐African orogenic event. However, the available zircon ages for the entire MB in East Africa and Madagascar also document that peak metamorphic conditions were reached at different times in different places. Large parts of the MB in central Tanzania consist of Archean and Palaeoproterozoic material that was reworked during the Pan‐African event and that may have been part of the Tanzania Craton and Usagaran domain farther to the west.     

T213对贵州省24小时雨量预报检验

T213数值预报产品中对我省12－36h之间24h雨量预报进行检验，结果表明：T213对我省的雨量预报准确率较高，对大雨以上量级的降水有较好的预报能力，可以作为日常天气预报业务的主要参考依据。