西藏尼木变质岩特征及变质温压条件

出露于雅鲁藏布江缝合带北侧尼木县的变质岩主要由石榴黑云片麻岩和黑云斜长角闪角岩组成.研究表明岩石变质程度达到角闪角岩相-辉石角岩相;石榴子石变斑晶具有生长环带,角闪石均为钙质角闪石,黑云母大多为铁质黑云母和铁叶云母,长石多为更长石和中长石,少量为正长石.利用石榴子石-黑云母温度计、石榴子石-黑云母-斜长石-石英压力计和角闪石-斜长石温度及压力计计算获得石榴黑云片麻岩和黑云斜长角闪角岩的变质温度分别为619 ～661℃,695 ～ 702℃,压力范围分别为1.86～1.94kbar和3.69～4.56kbar.野外和室内研究认为岩石原岩为冈底斯带南缘叶巴组火山岩及其上部沉积岩,岩石经历了高温低压的接触变质作用.结合已有冈底斯带陆缘岩浆活动特征,对变质岩的形成环境和过程进行了反演.     

中天山东部南北两缘韧性剪切带变形特征

(1)中天山北缘韧性剪切带除右旋韧剪变形之外,还发育相对较弱的左旋韧剪变形,局部残留加里东晚期的逆冲推覆韧剪变形;右旋韧剪变形的变形温度环境为中-低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(2)中天山南缘韧性剪切带以右旋韧剪变形为主,兼具左旋韧剪变形;右旋韧剪变形的变形温度环境为中温、中低温、低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(3)东天山存在一系列右旋韧性剪切带,中天山南北两缘韧性剪切带的构造变形与辛格尔断裂、兴地断裂等右旋韧性剪切带的变形以及塔里木北缘东部晚震旦—早古生代地层的同劈理褶皱变形、南天山泥盆纪地层的变形可能具成因联系。     

准噶尔盆地石南31井区清水河组油气水层分布规律

针对石南31井区储层岩性多变、油气水关系复杂等问题,按不同岩性识别油气层、水层和干层,据油气不同测井响应特征进一步识别油层和气层.将储层划分为细砂岩、中粗砂岩和砂砾岩3类,识别储层流体性质,分析油藏分布特征,指出油层、隔夹层平面分布特征,探讨油气水层分布规律.结果表明,石南31井区主要有4个油藏.储层所含流体有油、水和气,中北部细砂岩储层为纯油层,南部中粗砂岩储层为水层.气层从南到北分布于全区,主要位于油藏北部和东部局部区域,为今后解释工作具很好指导意义.     

利用地震属性解释煤层冲刷带

把地震属性技术和地震相分析技术应用于煤层冲刷带的解释工作中。首先从煤层反射波中提取了多种地震属性;然后分析对比地震属性与煤层冲刷带的响应特征;最后利用响应特征明显的地震属性对煤层冲刷带进行了综合解释,确定了煤层冲刷带的范围。与传统钻探解释方法相比,地震属性方法能够更准确地圈定煤层冲刷带的边界。     

云南西双版纳曼远铁矿矿床地质

曼远铁矿以磁铁矿、赤铁矿、磁赤铁矿为主,赋存于澜沧群勐井山组上段中部。该组地层中夹多层中性—基性火山岩、火山凝灰岩,属典型的火山沉积变质型铁矿。     

云县邦撒铁锰矿矿床成因探讨

铁锰矿产于新糖房背斜西翼南延澜沧江群中上部绢云石英片岩地层中,似层状、透镜状、囊状产出,矿床成因为沉积、变质铁锰矿床,其富集与表生氧化作用关系密切。     

基于辐射的潜在蒸散量估算方法适用性分析

根据不同气候区4个站的历史数据,选取8种基于辐射的PET估算方法,以FAO56-PM法计算的PET作为参考值进行比较分析,最后用20 cm蒸发皿蒸发量对所有方法在不同气候区的适用性进行评价.其结果表明,采用初始参数时,Hargreaves法在不同气候区估算的逐月以及多年月平均PET误差均较小,其它方法则产生较大误差.校...     

Transtensional folding

Strain modeling shows that folds can form in transtension, particularly in simple shear-dominated transtension. Folds that develop in transtension do not rotate toward the shear zone boundary, as they do in transpression; instead they rotate toward the divergence vector, a useful feature for determining past relative plate motions. Transtension folds can only accumulate a fixed amount of horizontal shortening and tightness that are prescribed by the angle of oblique divergence, regardless of finite strain. Hinge-parallel stretching of transtensional folds always exceeds hinge-perpendicular shortening, causing constrictional fabrics and hinge-parallel boudinage to develop.These theoretical results are applied to structures that developed during oblique continental rifting in the upper crust (seismic/brittle) and the ductile crust. Examples include (1) oblique opening of the Gulf of California, where folds and normal faults developed simultaneously in syn-divergence basins; (2) incipient continental break-up in the Eastern California-Walker Lane shear zone, where earthquake focal mechanisms reflect bulk constrictional strain; and (3) exhumation of the ultrahigh-pressure terrain in SW Norway in which transtensional folds and large magnitude stretching developed in the footwall of detachment shear zones, consistent with constrictional strain. More generally, folds may be misinterpreted as indicating convergence when they can form readily in oblique divergence.     

Strain distribution within a km-scale,mid-crustal shear zone: The Kuckaus Mylonite Zone,Namibia

The subvertical Kuckaus Mylonite Zone (KMZ) is a km-wide, crustal-scale, Proterozoic, dextral strike-slip shear zone in the Aus granulite terrain, SW Namibia. The KMZ was active under retrograde, amphibolite to greenschist facies conditions, and deformed felsic (and minor mafic) gneisses which had previously experienced granulite facies metamorphism during the Namaqua Orogeny. Lenses of pre- to syn-tectonic leucogranite bodies are also deformed in the shear zone. Pre-KMZ deformation (D₁) is preserved as moderately dipping gneissic foliations and tightly folded migmatitic layering. Shear strain within the KMZ is heterogeneous, and the shear zone comprises anastomosing high strain ultramylonite zones wrapping around less deformed to nearly undeformed lozenges. Strain is localized along the edge of leucogranites and between gneissic lozenges preserving D₁ migmatitic foliations. Strain localization appears controlled by pre-existing foliations, grain size, and compositional anisotropy between leucogranite and granulite. The local presence of retrograde minerals indicate that fluid infiltration occurred in places, but most ultramylonite in the KMZ is free of retrograde minerals. In particular, rock composition and D₁ fabric heterogeneity are highlighted as major contributors to the strain distribution in time and space, with deformation localization along planes of rheological contrast and along pre-existing foliations. Therefore, the spatial distribution of strain in crustal-scale ductile shear zones may be highly dependent on lithology and the orientation of pre-existing fabric elements. In addition, foliation development and grain size reduction in high strain zones further localizes strain during progressive shear, maintaining the anastomosing shear zone network established by the pre-existing heterogeneity.     

滇西高黎贡山变质带变质深成岩特征及时代

高黎贡山变质岩带中(腾冲大蒿坪地区),原划归古元古代高黎贡山岩群中广泛存在的变质深成岩类,原岩实际为早白垩世(163.5±5.7 Ma)花岗闪长岩和晚白垩世(74.0±2.0Ma)二长花岗岩类,属变质的燕山期深成侵入岩,可划分为扬飞水角闪黑云花岗闪长质片麻岩、芹菜塘花岗片麻岩两个变质地体单元.早白垩世花岗闪长岩形成于造山前期同碰撞火山弧环境;晚白垩世二长花岗岩侵入岩形成于造山前期碰撞造山环境,并沿断裂带强烈侵位.原岩经喜马拉雅早期韧性剪切带动力变质,变质强度达高绿片岩相或低角闪岩相,形成花岗质片麻岩类,喜马拉雅中期叠加脆韧性动力变质作用.