滇东-黔西地区晚二叠世煤岩及煤层气储层物性分析

本文以丰富的地质资料对滇东－黔西地区晚二叠世煤岩分布的割理（裂隙）,吸附、孔隙溶积、镜质组含量、含气性、灰分产率等进行了较为系统的研究,初步建立了煤炭与煤层气储层物性的关系,提出了镜质组含量的煤炭类型有较好的煤层气储集物性条件。     

金川超镁铁质岩元素及稀有气体同位素地球化学特征

金川超镁铁质岩是金川铜镍硫化物矿床的赋存岩体．采自金川镍矿Ⅰ矿区露天矿第2期侵入岩体的样品其岩石类型主要为含二辉橄榄岩和二辉橄榄岩，见镍黄铁矿、磁黄铁矿、黄铁矿呈成条带状出现，表明其形成时低氧逸度的成岩环境。运用ICP—MS等离子质谱仪和MM5400稀有气体质谱仪分别对全岩样品的稀土元素、微量元素和包体稀有气体同位素进行测定后得到一些认识：金川超镁铁质岩的微量元素丰度与球粒陨石相比，变化曲线基本呈水平分布，但是地壳中高度亏损Cr，Ni元素含量较高，主要富集于超基性的辉石和橄榄石中，说明其成因类型具有明显的幔源特征。岩石中稀土元素总量较高，为轻稀土富集型．重稀土亏损。其中由深至浅稀土元素对La／Yb，Ce／Yb，La／Sm，(La／Sm)N的比值均基本呈现增大趋势．说明其中稀土元素分馏程度呈增大趋势，轻稀土的分馏尤为明显。超镁铁质岩的^3He／^4He值分布于0．847Ra～1．625Ra之间，虽远低于上地幔的^3He／^4He值．但仍存在地幔初始氦的踪迹。研究结果表明，该岩体在侵入过程中发生了明显的分异作用，并与地壳发生了的混染作用和热液交代作用．进一步证明了该岩体为上地幔局部熔融的超基性岩浆上侵形成的。     

西藏羌塘盆地东部中-上侏罗统沉积特征及沉积相划分

详细野外剖面测量基础上,对羌塘盆地东部中-上侏罗统剖面主要岩类的宏观特征(颜色和构造)、物质组分、结构及磁化率等特征进行系统研究,研究区碎屑岩主要为砾岩、砂岩、粉砂岩和泥岩等岩类,磁化率值呈现低→高→低→高→低(雀莫错组→布曲组→夏里组→索瓦组→雪山组)的规律性变化。综合沉积特征显示雀莫错组和雪山组主要为河流相-河控三角洲相沉积,布曲组为碳酸盐缓坡相沉积为主,夏里组主要为潮坪-泻湖相沉积,索瓦组主要为混积陆棚-泻湖-潮坪相沉积,中-晚侏罗世羌塘盆地古水深在下降的总趋势中呈现浅→深→浅→深→浅的升降旋回,盆地沉积中心由东向西迁移,区域构造演化和全球海平面变化共同控制了盆地沉积面貌。     

Chemical variation from biolipids to sedimentary organic matter in modern oceans and its implication to the geobiological evaluation of ancient hydrocarbon source rocks

Understanding the dynamics of organic matter in modern marine water columns greatly favors the geobiological evaluation of hydrocarbon source rocks. Biolipids could make great contribution to petroleum hydrocarbons due to their comparable chemical components and the slightly refractory characteristics of biolipids during the microbial/thermal degradation. A variety of environmental factors such as temperature, CO₂ and salinity could affect the biochemical contents in microorganisms. As a result, microorganisms living in a changing environmental condition might have a different contribution to the petroleum formation. Organic carbon flux is shown to bear a positive correlation with the primary productivity only within a certain range of biomass volumes in a specific biohabitat. Furthermore, organic matter is degraded much quickly in a water column with oxic conditions. Therefore, the anoxic condition, along with the enhanced biological productivity, would be one of the significant factors in the formation of high-quality hydrocarbon source rocks. The formation of biofilms and microbial mats favors the preservation of sedimentary organic matter by decreasing the degradation rate of organic matter. Identification of biofilms and microbial mats in sedimentary rocks will thus greatly help to understand the depositional processes of organic matter finally preserved in hydrocarbon source rocks. __________ Translated from Earth Science—Journal of China University of Geosciences, 2007, 32(6): 748–754 [译自: 地球科学—中国地质大学学报     

Flow and transport predictions during multi-borehole tests in fractured chalk using discrete fracture network models

Multi-borehole pumping and tracer tests on the 10 to 100-m scale were conducted in a fractured chalk aquitard in the Negev Desert, Israel. Outcrop and core fracture surveys, as well as slug tests in packed-off intervals, were carried out at this site to obtain the parameters needed for construction of a stochastic discrete fracture network (DFN). Calibration of stochastic DFNs directly to the multiple borehole test data was inadequate. Instead, two equivalent deterministic DFN flow models were used: the vertical-fractures (VF) model, consisting of only vertical fractures, and the fractures’ intersections (INT) model, consisting of vertical and horizontal fractures with enhanced transmissivity at their intersections. Both models were calibrated against the multi-borehole response of one pumping test and their predictions were tested against three other independent pumping tests. The average accuracies of all transient drawdown predictions of the VF and INT models were 65 and 66%, respectively. In contrast to this equality in average drawdown predictions of both models, the INT model predicted better important breakthrough curve features (e.g., first and peak arrival times), than the VF model. This result is in line with previously assumed channeled flow, derived from analytical analysis of these pumping and tracer tests. Ronit Nativ, deceased, may her memory be blessed.     

A case study to verify methods for estimating transmissivity distributions along boreholes

Two methods, both using data from fixed-interval-length hydraulic tests and geological mapping on different scales, have been utilised to estimate transmissivity distributions of individual fractures. Individual fracture properties are of importance in estimating transport of water and solutes; they influence the spreading of grout when sealing tunnels. One of the methods is non-parametric, while the other is based on combinatorics and the multiplication principle. The study verified the usefulness of both methods for estimating the probability of conductive and non-conductive fractures, and the transmissivity distributions. Data for estimating transmissivity distributions originate from flow logging of a borehole in Sweden. Fracture frequency data are from core logging and images using a borehole image processing system (BIPS). Estimated transmissivity distributions, based on flow log data from 3-m sections (test scale length, L: 3 m, and step length, dL: 3 m), were compared with transmissivities obtained directly from detailed, overlapping flow logging which identify individual conductive fractures (test scale, L: 0.5 m, step length, dL: 0.1 m). The latter data are considered to be an acceptable approximation of the individual fracture transmissivities; the agreement, compared with the calculated transmissivity distributions based on 3-m section data, is good for both methods.

---

Resumen Se han utilizado dos métodos, ambos procesando datos de pruebas hidráulicas de longitud e intervalo fijo y mapas geológicos en distintas escalas, para estimar las distribuciones de transmisividad de fracturas individuales. Las propiedades de fracturas individuales son de importancia para estimar el transporte de agua y solutos; las propiedades influyen en la propagación de lechada al sellar túneles. Uno de los métodos es no paramétrico mientras que el otro se basa en el principio de multiplicación y combinatorio. El estudio verifica la utilidad de ambos métodos para estimar la probabilidad de fracturas conductivas y no conductivas y las distribuciones de transmisividad. Los datos para estimar las distribuciones de transmisividad se originan del registro de flujo de un pozo en Suecia. Los datos de frecuencia de fracturas provienen de registros de núcleo e imágenes usando un Sistema de Procesamiento de Imágenes de Pozo (BIPS). Se compararon las distribuciones estimadas de transmisividad basadas en datos del registro de flujo en secciones de 3 m (longitud de escala de la prueba L: 3 m, y escalón de longitud dL: 3 m), con transmisividades obtenidas directamente de registros detallados de flujo superpuesto el cual identifica fracturas conductivas individuales (escala de la prueba, L: 0.5 m, escalón de longitud, dL: 0.1 m). Los últimos datos se consideran una aproximación aceptable de las transmisividades de fracturas individuales; la consistencia, comparada con las distribuciones de transmisividad calculada basadas en datos de sección de 3 m, es buena para ambos métodos.

---

Résumé Deux méthodes ont été testées afin d’estimer la distribution des transmissivités de fractures unitaires; toutes deux utilisent des données issues de tests hydrauliques effectués à intervalles réguliers et de cartographies géologiques à plusieurs échelles. La connaissance des propriétés des fractures unitaires est importante pour estimer le transport d’eau et de solutés; elles influencent en outre l’étalement du coulis lors du scellement des tunnels. La première méthode est non-paramétrique, et la seconde repose sur l’analyse combinatoire et le principe de multiplication. Cette étude a vérifié l’utilité des deux méthodes pour estimer la probabilité d’occurrence de fractures conductrices et non-conductrices, et la distribution des transmissivités. Les distributions des transmissivités ont été estimées à partir de diagraphies effectuées sur un forage situé en Suède. Les densités de fracturation proviennent de carottages et d’imagerie BIPS (Borehole Image Processing System). Les distributions estimées des transmissivités, basées sur des diagraphies de flux effectuées sur des sections de 3 m (échelle du test L:3 m; pas dL:3 m), ont été comparées aux transmissivités obtenues sur des diagraphies de flux détaillées et se chevauchant, identifiant les fractures conductrices unitaires (échelle du test L: 0.5 m ; pas dL: 0.1 m). Il est admis que ces dernières données représentent une approximation satisfaisante des transmissivités des fractures unitaires; les deux méthodes sont en accord avec les distributions des transmissivités calculées à partir des données acquises sur des sections de 3 m.

     

陕蒙交界地区碎屑岩风化成因浅析

陕蒙交界地区基岩均具强风化,由此造成当地环境恶化、下游地区生态破坏和灾害积累。其形成机理应与岩石本身的物质组成、自然地理环境、地质构造状况、水文地质条件及其物理化学条件有关。而南部地区,由于上述诸因素的差别,基岩风化微弱。     

Hydraulic properties of the crystalline basement

Hydraulic tests in boreholes, up to 4.5 km deep, drilled into continental crystalline basement revealed hydraulic conductivity (K) values that range over nine log-units from 10⁻¹³−10⁻⁴ m s⁻¹. However, K values for fractured basement to about 1 km depth are typically restricted to the range from 10⁻⁸ to 10⁻⁶ m s⁻¹. New data from an extended injection test at the KTB research site (part of the Continental Deep Drilling Program in Germany) at 4 km depth provide K=5 10⁻⁸ m s⁻¹. The summarized K-data show a very strong dependence on lithology and on the local deformation history of a particular area. In highly fractured regions, granite tends to be more pervious than gneiss. The fracture porosity is generally saturated with Na–Cl or Ca–Na–Cl type waters with salinities ranging from <1 to >100 g L⁻¹. The basement permeability is well within the conditions for advective fluid and heat transport. Consequently, fluid pressure is hydrostatic and a Darcy flow mechanism is possible to a great depth. Topography-related hydraulic gradients in moderately conductive basement may result in characteristic advective flow rates of up to 100 L a⁻¹ m⁻² and lead to significant advective heat and solute transfer in the upper brittle crust. An erratum to this article can be found at     

江西安远路迳金伯利质煌斑岩筒研究——一种新型的幔源碱性超基性岩

路迳岩筒属火山通道相,由金伯利质煌斑岩、角砾岩、角砾凝灰岩组成,富含幔源橄榄岩包体、普通辉石巨晶和岩球。造岩矿物是橄榄石、斜方辉石、单斜辉石、角闪石和金云母,深源特征指示矿物有镁铝榴石、铬透辉石、铬尖晶石和镁钛铁矿。岩石化学组成超低SiO2,低MgO,高Al2O3,富碱,富挥发组分。轻稀土元素富集,相容元素贫化,不相容元素明显富集。岩浆起源深度约85km。其中：岩体产状,富含包体、巨晶和岩球,岩石结构和构造,矿物组成,岩石化学组成超低SiO2、富碱、富挥发组分等特征与金伯利岩相似;但岩石化学组成高Al2O3,低MgO,K2O低于Na2O,REE和LREE/HREE偏低,部分微量元素的亏损或富集,金云母成分富TiO2,富TFeO,贫MgO,镁铝榴石、铬透辉石、铬尖晶石和镁钛铁矿的Cr2O3含量偏低,岩浆起源深度较浅,均与金伯利岩有重大差异,而更接近煌斑岩类。研究认为,是幔源岩浆岩的一种新类型,岩石名称界定为金伯利质煌斑岩。