北大别白垩纪镁铁－超镁铁岩的铂族元素地球化学研究

采用镍锍火试金法结合ICP-MS分析了12个北大别白垩纪镁铁-超镁铁岩样品的Ir,Ru,Rh,Pt和Pd的含量,结果显示铂族元素（PGE）的含量较低,原始地幔标准化后的PGE分布模式呈正斜率型,PPGE相对原始地幔略微亏损,而IPGE强烈亏损,Pd/Ir值远高于相应的地幔比值。这些镁铁-超镁铁岩中PGE的强烈分异是地幔低程度的部分熔融过程中,PPGE主要受硫化物控制,而Ir则存在于非硫化物相如尖晶石,可能还有合金之中造成的。同时,铂族元素的分布特征表明这些镁铁-超镁铁岩是岩浆结晶分异的产物。     

岩矿显微组构对水银洞金矿成因的指示

黔西南水银洞金矿为产于上二叠统龙潭组中的超大型、高品位金矿床,矿床由多个金矿体组成.工业金矿体顺层产于龙潭组含煤地层所夹的玄武质、硅质、生物碎屑碳酸盐岩中.对水银洞金矿赋矿地层岩石以及矿石显微组构进行了研究,矿石中主要载金矿物为细粒黄铁矿,具再生边、粒内孔隙、铸模孔隙结构及镶边生物矿化构造、铸模式生物矿化构造,是一典型的具沉积一成岩组构.金矿化与硅化有密切的成因联系,金与SiO2来源于峨嵋山玄武岩的喷溢活动,主要金矿体更多显示与峨嵋山玄武岩准同生特征.矿床为沉积一成岩弱改造成囚金矿床.     

胶南构造混杂岩带中糜棱岩的显微形变特征与古构造环境——来自榴辉岩围岩的构造信息

以胶南构造混杂岩带中榴辉岩的围岩——套程度不同的糜棱岩化岩石为研究对象,重点研究了其显微形变的结构特征及环境意义、石英组构特征及动力学信息,并讨论其形成的古构造环境和构造机制。     

Facies recognition of some Tertiary coals applied to prediction of oil source rock occurrence

Coals are oil source rocks in many of the Tertiary basins of Southeast Asia. The precursors of these hydrogen rich and oxygen poor coals are coastal plain peats which have mainly developed in an everwet and tropical climate. In these environments water flow and reworking can concentrate liptinitic kerogen in preference to vitrinitic kerogen. The distribution, petrography and chemistry of the coaly Miocene source rocks present in the Kutai Basin are described. The recognition of environmental controls on the accumulation of potentially oil-prone coals and coaly shales in deltaic environments is an aid to predictive source bed recognition in petroleum exploration. Comments on the environment of deposition of coaly sediments in the basins of the Norwegian Sea are discussed with reference to their possible oil and/or gas sourcing potential. The Triassic - Jurassic coals of the Haltenbanken area may become more oil-prone towards the delta margins, and facies mapping could aid oil exploration in this area.     

Evaluation of distributed recharge in an upland semi-arid karst system: the West Bank Mountain Aquifer,Middle East

Assessment of recharge in a structurally complex upland karst limestone aquifer situated in a semi-arid environment is difficult. Resort to surrogate indicators such as measurement of spring outflow and borehole discharge, is a common alternative, and attempts to apply conventional soil moisture deficit analysis may not adequately account for the intermittent spate conditions that arise in such environments. A modelling approach has been made using the West Bank Mountain Aquifer system in the Middle East as a trial. The model uses object oriented software which allows various objects to be switched on and off. Each of the main recharge processes identified in the West Bank is incorporated. The model allows either conventional soil moisture deficit analysis calculations or wetting threshold calculations to be made as appropriate, and accommodates both direct recharge and secondary recharge. Daily time steps enable recharge and runoff routing to be calculated for each node. Model runs have enabled a series of simulations for each of the three aquifer basins in the West Bank and for the whole of the West Bank. These provide recharge estimates comparable to those prepared by earlier workers by conventional means. The model is adaptable and has been successfully used in other environments.     

In situ estimation of the effective chemical diffusion coefficient of a rock matrix in a fractured aquifer

An in situ method of estimating the effective diffusion coefficient for a chemical constituent that diffuses into the primary porosity of a rock is developed by abruptly changing the concentration of the dissolved constituent in a borehole in contact with the rock matrix and monitoring the time-varying concentration. The experiment was conducted in a borehole completed in mudstone on the campus of the University of the Free State in Bloemfontein, South Africa. Numerous tracer tests were conducted at this site, which left a residual concentration of sodium chloride in boreholes that diffused into the rock matrix over a period of years. Fresh water was introduced into a borehole in contact with the mudstone, and the time-varying increase of chloride was observed by monitoring the electrical conductivity (EC) at various depths in the borehole. Estimates of the effective diffusion coefficient were obtained by interpreting measurements of EC over 34 d. The effective diffusion coefficient at a depth of 36 m was approximately 7.8×10^?6 m²/d, but was sensitive to the assumed matrix porosity. The formation factor and mass flux for the mudstone were also estimated from the experiment.     

Estimation of hydraulic permeability considering the micro morphology of rocks of the borehole YAXCOPOIL-1 (Impact crater Chicxulub,Mexico)

Internal surface, formation factor, Nuclear Magnetic Resonance (NMR)-T2 relaxation times and pore radius distributions were measured on representative core samples for the estimation of hydraulic permeability. Permeability is estimated using various versions of the classic Kozeny–Carman-equation (K–C) and a further development of K–C, the fractal PaRiS-model, taking into account the internal surface. In addition to grain and pore size distribution, directly connected to permeability, internal surface reflects the internal structure (“micro morphology”). Lithologies could be grouped with respect to differences in internal surface. Most melt rich impact breccia lithologies exhibit large internal surfaces, while Tertiary post-impact sediments and Cretaceous lithologies in displaced megablocks display smaller internal surfaces. Investigations with scanning electron microscopy confirm the correlation between internal surface and micro morphology. In addition to different versions of K–C, estimations by means of NMR, pore radius distributions and some gas permeability measurements serve for cross-checking and calibration. In general, the different estimations from the independent methods and the measurements are in satisfactory accordance. For Tertiary limestones and Suevites bulk with very high porosities (up to 35%) permeabilites between 10⁻¹⁴ and 10⁻¹⁶ m² are found, whereas in lower Suevite, Cretaceous anhydrites and dolomites, bulk permeabilites are between 10⁻¹⁵ and 10⁻²³ m².     

西藏冈底斯带侏罗纪岩浆作用的时空分布 及构造环境

在新近完成的1：25万区域地质调查资料和相关研究成果的基础上,初步研究了西藏冈底斯带侏罗纪岩浆作用的分布特点及其年代学,并利用已有的地球化学数据重点分析了早期关注程度较低的侏罗纪花岗岩类岩浆作用的性质。目前在冈底斯弧背断隆带未发现侏罗纪火山岩;在冈底斯东部地区,早侏罗世岩浆活动几乎同时发生于南冈底斯（叶巴组火山岩和鸟郁、尼木花岗岩类）、冈底斯弧背断隆带（宁中、金达、布久花岗岩类）和北冈底斯（聂荣花岗岩类）,中晚侏罗世接奴群和拉贡塘组火山岩断续分布于北冈底斯,晚侏罗世岩浆活动零星分布于沙莫勒一麦拉一洛巴堆～米拉山断裂以北。将冈底斯侏罗纪岩浆活动置于时空框架内分析发现,南冈底斯和北冈底斯在侏罗纪时主要受俯冲作用的影响．而冈底斯弧背断隆带和中冈底斯自早侏罗世以来除了受到俯冲作用的影响外,还受到自东向西逐步扩展的碰撞作用的影响。结合古地磁重建资料和其他新发现．认为冈底斯带侏罗纪这种岩浆活动的特点可用班公湖一怒江洋壳向南、新特提斯洋壳向北的双向剪刀式（剪刀口向西张开）俯冲模式来解释。     

姬塬油田长4＋5砂岩储层孔隙类型与成岩作用

通过常规物性、岩石及铸体薄片、重矿物、X射线衍射、扫描电镜等多项测试方法,对鄂尔多斯盆地姬塬油田长4 5含油砂体的岩石学特征、成岩作用、储集类型进行了分析和研究。长4 5储层孔隙主要以粒间孔和长石溶孔为主,粒间溶孔次之,孔隙组合一般以粒间孔和溶孔-粒间孔为主。本区破坏性成岩作用包括机械压实作用、石英及长石的次生加大、碳酸盐胶结作用等,其中压实作用是造成本区砂岩原生孔隙大量丧失的主要原因。建设性成岩作用为溶蚀作用、绿泥石粘土膜形成作用,但溶蚀作用产生的次生孔隙对储层物性的改善不足。     

大陆岩石圈对扩张机制的响应—辽蒙地质走廊中—新生代火山活动的时空分布

选择辽西为中心,以近东西向延伸800km的辽蒙地质走廊为研究区,通过年代学研究,确认130Ma以来的中、新生代火山活动对称分布的时空格局,具有“中间老、两侧新”的特点,而且随着时间的推移,软流圈来源的岩浆向东西两侧侧向流动,岩浆来源不断加深。在此基础上提出“软流圈底辟体上涌和水平侧向流动”的模式。