巴尔喀什成矿带阿克沙套云英岩型钨钼矿床地质特征与铼-锇同位素测年分析

哈萨克斯坦阿克沙套大型钨钼矿床处于中亚成矿域巴尔喀什成矿带内。该矿床为云英岩型浸染状矿床, 具有云英岩型矿床的典型矿物组合、围岩蚀变、矿体形态和结构构造。矿区产出有伟晶岩、石英长石脉, 含有钨钼矿、石英和黄玉云英岩矿体等。本文对阿克沙套钨钼矿床辉钼矿样品进行了铼-锇同位素分析, 得到辉钼矿模式年龄(平均值)为289.3 Ma, 处在早二叠世。分析认为, 阿克沙套云英岩型钨钼成矿作用是晚石炭世中亚成矿域大规模斑岩型铜钼成矿作用延续的结果, 属中亚造山带海西晚期构造-岩浆活动的产物。      

The oldest Mo porphyry mineralization in the Yangtze Valley Metallogenic Belt of eastern China: Constraints on its origin from geochemistry,geochronology and fluid inclusion studies at Matou

The Matou Mo(-Cu) deposit, located in the Yangtze Valley Metallogenic Belt of central-eastern China, is a typical porphyry-type Mo deposit. The orebodies at the deposit are hosted by Matou porphyritic granodiorite, which is the largest intrusive in the area. Quartz vein-type and disseminated sulfide mineralization are well developed in the porphyry and near its contact with Silurian sandstone. Crosscutting relationships indicate that porphyritic granodiorite is the oldest phase in the pluton, which is crosscut by a porphyritic diorite containing traces of chalcopyrite, and later dolerite dykes. These phases have U-Pb zircon dates of 147 ± 3, 140 ± 1 and 135 ± 1 Ma, which confirms the cross-cutting relationships observed in the field. A Re-Os molybdenite isochron age of 147 ± 4 Ma indicates that the porphyritic granodiorite is the source of the oldest Mo mineralization in the metallogenic belt and was formed during a change of the tectonic setting in the area, from an intracontinental orogeny to extensional tectonics. From 147 to 135 Ma, crust-mantle interaction played an important role in the formation of magmatic rocks at Matou. Systematic petrological and geochemistry investigations reveal that the three phases have a crust source with minor input from the mantle. Investigation of ore-forming fluid, H-O isotopes, S isotopes, and the Re content of molybdenite indicate that the ore-forming fluid and metals were derived from the lower crust. During the evolution of fluid from initial magmatic fluids (stage I) to ore-forming fluids (stage II), fluid boiling accompanied by the input of relatively cooler meteoric water led to the deposition of the Mo mineralization.     

A prediction model for important mineral resources in China

Prediction models for mineral resources provide an analytical foundation and method to express the results of resource evaluations. The project “China National Mineral Resources Assessment Initiative” was conducted during 2006–2013, with the aim to determine the location, quantity, and quality of 25 important mineral resources occurring at depths of <1 km. There are currently 80 integrated prediction models on the scale of III–level metallogenic belts in use across China. The Huangshaping Pb–Zn polymetallic deposit, Hunan province, China, is used as a case study to establish methods and processes for developing a mineral resource prediction model that would be used for exploration targeting. The construction of prediction models requires the development of a classification scheme for the proposed prediction method appropriate for the prediction area. An initial metallogenic model is quantitatively transformed to a prospecting model, and then a prediction model. The incorporation of additional methodology, analysis of a comprehensive geological database, and correlation of asymmetric information between the well–explored typical deposit area and regional prediction area, yield an integrated prediction model. This paper also discusses the prediction modeling theory, and presents 12 models used for mineral assessments.     

不同截止高度角下BDS-3SPP精度分析

针对卫星可见数与历元可用率较低情况下的BDS-3定位性能,本文基于MEGX跟踪站BDS-3与GPS实测数据,分析了不同高度角（10°、20°、30°、40°）下BDS-3卫星B1I、B1C、B2a、B3I,以及GPS系统L1频率的单点定位（SPP）精度。研究发现,BDS-3平均卫星可见数与卫星空间几何构型优于GPS,且随着高度角的增加呈线性变化。BDS-3的4个频率的SPP精度随着高度角的增加呈先增加后降低的趋势,高度角为20°时,定位精度最高,高度角达到40°时,定位精度最低,且历元可用率也最低;但B1I和B3I历元可用率仍大于90%,而B1C和B2a历元可用率大于70%;不论是SPP定位精度还是历元可用率,均优于GPS系统L1频率。     

GPS历元比较时间对齐方法

基于“齿轮转动”思想,本文设计了对GPS历元时间对齐比较的方法,实现了两个GPS历元文件各历元准确遍历自动查询,有效解决了历元比较时间对齐耗时、费力问题;通过文件两两比较可实现三文件比较,该方法查询速度快、省时简便,同时为其他具有相同特性的数据比较提供了很好的经验,具有较好的实际应用价值。     

从成矿构造动力学探讨脉状金矿床成矿深度

在综述国内外与韧性剪切带有关的脉状金矿床成矿动力学的新近研究成果后,根据成矿控矿构造动力学特征及其与成矿流体运移机制、矿物结晶特点的关系认为矿物结晶发生于地震微破裂导致成矿流体压力骤降后的低压力阶段,由矿物包裹体压力并按静岩压力梯度推算的成矿深度要明显小于矿床的实际成矿深度.本文提出一种新的成矿深度估算方法,其估算的成矿深度与目前大多数脉状金矿床中石英具有明显的韧性变形的特点相吻合.     

四川省九龙县黑牛洞富铜矿矿床黑云母40Ar-39Ar测年及其地质意义

四川省九龙县黑牛洞铜矿床为近期新发现的一个规模在中型以上,产于江浪变质核杂岩中的富铜矿床。本文测试了黑牛洞铜矿床中与成矿密切相关的黑云母的40Ar/39Ar年龄为136.43±0.77 Ma,说明黑牛洞矿床形成于燕山中期。结合矿区附近李伍富铜床矿床地质特征及成矿年龄,表明黑牛洞铜矿床与李伍铜矿床为同一时期形成的矿床,两者成矿与松潘－甘孜造山带大规模岩浆热事件有关,这对于重新认识李伍铜矿床外围找矿潜力和进一步指导找矿工作具有重要意义。     

枣子沟金矿地质特征及成矿模式探讨

枣子沟金矿位于新堡-力士山复背斜南翼之合作-岷县区域断裂带上,是西秦岭西段近年来勘查的特大型金矿床之一.在研究矿区地质特征基础上,通过对矿体特征、矿石成分、成矿流体主要来源及成矿作用过程等分析研究,提出该矿床成矿模式.     

江南造山带黄金洞金矿床成矿机制:矿物形成环境与金成矿物理化学条件制约

黄金洞超大型金矿床位于江南造山带中段,赋存于新元古界浅变质岩系中,受控于NNE-NE向长平断裂带,金资源储量达100吨。该矿床可由南至北分为金福、金塘、杨山庄和曲溪矿段,主要矿化类型有石英-硫化物脉型、构造角砾岩型和黄铁毒砂绢英岩型。金属矿物主要发育有自然金、毒砂、黄铁矿、黄铜矿、闪锌矿、方铅矿、磁黄铁矿等;非金属矿物有石英、绢云母、方解石和菱铁矿等,其中金主要以自然金与不可见金形式存在。根据野外与镜下观察,金成矿作用分为Ⅰ石英-金-毒砂-黄铁矿、Ⅱ石英-金-多金属硫化物-白钨矿和Ⅲ石英-辉锑矿-绿泥石3个阶段,前二者为主要成矿阶段。曲溪矿段Ⅱ阶段毒砂相对不发育、而磁黄铁矿和自然金显著发育,绿泥石主要发育于Ⅲ阶段中,与辉锑矿及闪锌矿共生。根据不同矿段各阶段毒砂与Ⅲ阶段绿泥石成分,计算其温度、lgf(S_2)与lgf(O_2),可见Ⅰ阶段成矿温度与硫逸度高于Ⅱ阶段:杨山庄矿段两阶段成矿温度分别为300～378℃、260～300℃,lgf(S_2)分别为-11～-7.2、-11.9～-10.1;金塘两阶段成矿温度为240～311℃、245～298℃;金福Ⅱ阶段成矿温度上限为297℃;曲溪矿段成矿温度为268～368℃,Ⅱ阶段毒砂lgf(S_2)与Ⅲ阶段绿泥石lgf(O_2)分别为-13.2～-8.7、-50.9～-40.1。根据不同阶段矿物之间的相互关系及成矿温度与硫逸度演化特征,推断Ⅰ、Ⅱ成矿阶段伴随强烈的硫化作用,金以类质同象方式进入毒砂和黄铁矿中,形成不可见金;其中Ⅱ阶段由于成矿流体压力骤降,含金流体发生相分离作用,H2S等气体大量逃逸,导致成矿流体中硫含量骤降,加以硫化作用持续消耗流体中的硫,促进了含金络合物分解与自然金的沉淀。     

大兴安岭地区内生铜矿床的成因类型、成矿时代与成矿动力学背景

大兴安岭地区位于兴蒙造山带的东段,构造、岩浆活动强烈,蕴藏着丰富的内生有色金属、贵金属矿产资源。本文通过对该区内生铜矿床的地质特征、成因类型和年代学研究,初步将区内内生铜矿床划分为斑岩型、浅成热液高硫化型(铜银、铜锡)和接触交代型三种成因类型,除铜锡矿床外,它们的成矿作用均与高钾钙碱系列I型花岗质岩浆密切相关;其中斑岩型和浅成热液高硫化型(铜、银)的成矿分别发生在485Ma、180~170Ma和170~160Ma;而浅成热液高硫化型(铜锡)矿床与A型花岗质岩浆相关,成矿在150~135Ma之间;接触交代型与它们相伴生,主要发生在180~160Ma和150~135Ma。其成矿动力学背景分别与早古生代兴安地块与松嫩地块的拼合碰撞造山、中侏罗世的西伯利亚板块和华北板块的陆缘增生带碰撞缝合造山与早白垩世碰撞造山后的地壳伸展减薄作用过程相适应,矿床在不同阶段的造山挤压与伸展转换或造山期后的伸展阶段就位,这项研究为深入研究该区内生多金属成矿规律提供了科学依据。