Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.     

Prediction of creep characteristic of rock under varying environment

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.     

Fault geometry and mechanics of marly carbonate multilayers: An integrated field and laboratory study from the Northern Apennines,Italy

Sealing layers are often represented by sedimentary sequences characterized by alternating strong and weak lithologies. When involved in faulting processes, these mechanically heterogeneous multilayers develop complex fault geometries. Here we investigate fault initiation and evolution within a mechanical multilayer by integrating field observations and rock deformation experiments. Faults initiate with a staircase trajectory that partially reflects the mechanical properties of the involved lithologies, as suggested by our deformation experiments. However, some faults initiating at low angles in calcite-rich layers (θ_i = 5°–20°) and at high angles in clay-rich layers (θ_i = 45°–86°) indicate the important role of structural inheritance at the onset of faulting. With increasing displacement, faults develop well-organized fault cores characterized by a marly, foliated matrix embedding fragments of limestone. The angles of fault reactivation, which concentrate between 30° and 60°, are consistent with the low friction coefficient measured during our experiments on marls (μ_s = 0.39), indicating that clay minerals exert a main control on fault mechanics. Moreover, our integrated analysis suggests that fracturing and faulting are the main mechanisms allowing fluid circulation within the low-permeability multilayer, and that its sealing integrity can be compromised only by the activity of larger faults cutting across its entire thickness.     

Displacement velocity effects on rock fracture shear strengths

Triaxial shear tests are performed to assess the effects of displacement velocity and confining pressure on shear strengths and dilations of tension-induced fractures and smooth saw-cut surfaces prepared in granite, sandstone and marl specimens. A polyaxial load frame is used to apply confining pressures between 1 and 18 MPa with displacement velocities ranging from 1.15 × 10⁻⁵ to 1.15 × 10⁻² mm/s. The results indicate that the shearing resistances of smooth saw-cut surfaces tend to be independent of the displacement velocity and confining pressure. Under each confinement the peak and residual shear strengths and dilation rates of rough fractures increase with displacement velocities. The sheared-off areas increase when the confining pressure increases, and the displacement rate decreases. The velocity-dependent shear strengths tend to act more under high confining pressures for the rough fractures in strong rock (granite) than for the smoother fractures in weaker rocks (sandstone and marl). An empirical criterion that explicitly incorporates the effects of shear velocity is proposed to describe the peak and residual shear strengths. The criterion fits well to the test results for the three tested rocks.     

Modeling discontinuous rock mass based on smoothed finite element method

This paper aims at developing a method for modeling rock mass with preexisting multiple discontinuities within the framework of the smoothed finite element method (SFEM). The discontinuity is simulated by an interface element with zero thickness, the stiffness matrix of which are derived explicitly based on the SFEM. An elastic damage constitutive relation with residual strength is introduced in order to describe the nonlinear mechanical behavior of the discontinuities. The computation codes of the present method were developed. The present method has been verified to be a sound approach for modeling discontinuous rock mass, inheriting the advantages of the SFEM.     

三塘湖盆地石炭系卡拉岗组火山岩岩相研究

三塘湖盆地石炭系卡拉岗组火山岩岩性揭示该区火山岩岩相主要包括火山爆发相、溢流相,火山沉积相不发育。为了明确不同岩相分布规律,本文系统利用测井、地质、地震等多种资料,建立测井岩性识别模板,以单井相作为约束,开展地震反演,明确火山岩岩相的平面分布规律。研究结果表明:该区火山喷发方式以裂隙式为主,火山口呈串珠状沿主断裂排列;溢流相平面呈层状分布,溢流相安山岩最为发育。研究结果可有效指导该区火山岩油藏的勘探评价工作,同时为火山岩岩相研究提供可借鉴的研究思路。     

Volcanological study of the middle Miocene Okiduse Volcanic Group,Woodlark Island (Muyuw), eastern Papua

Woodlark Island (Muyuw) is located in a tectonically complex region, one of the few places on Earth where continental breakup is occurring ahead of seafloor spreading. Rifting commenced in the late Miocene (8.8–6 Ma) and is associated with the westward-propagating Woodlark Basin Spreading Centre. The island comprises approximately 850 km² of raised Pleistocene coral reef and associated sediments with a central, moderately elevated range underlain by the middle Miocene calc-alkaline to shoshonitic Okiduse Volcanic Group (new name). It provides an exposure of upper Cenozoic geology in close proximity to the spreading centre. The Okiduse Volcanic Group is host to most of the island's historical gold and silver production and recently defined mineral resources totalling 1.75 Moz gold. This study uses facies analysis of pyroclastic deposits to develop a detailed geological map of the Okiduse Volcanic Group, with a revision and reinterpretation of the unit. Facies associations suggest that two major volcanic centres erupted synchronously during the middle Miocene (14–12 Ma), referred to as the Watou Mountain Eruptive Centre (new name) and the Uvarakoi Caldera (new name). The mafic–intermediate Watou Mountain Eruptive Centre formed during frequent small eruptions of widely varying style. Strombolian, subplinian, vulcanian and dome-related explosive eruptions occurred, alternating with extrusion of block and ash flow deposits and lava domes. Pyroclastic deposits were rapidly reworked from the steep cone, and were redeposited in a series of coalescing aprons surrounding the volcano. The felsic Uvarakoi Caldera formed during a series of violent explosive eruptions by rapid removal of magma from the underlying chamber, followed by collapse. Plinian and possibly phreatoplinian eruptions, as a result of magma–water mixing in the surface environment, resulted in widely dispersed, highly fragmented tuff deposits. The caldera was modified by widespread erosion following eruptions, resulting in fluvial, laharic and slope-wash deposits. This study highlights lithological controls (porosity and permeability) by various units within the Okiduse Volcanic Group on ore deposition.     

Sulfur speciation with high performance liquid chromatography as a tool for El Chichón volcano,crater lake monitoring

The monitoring of sulfur species in crater lakes has proven to be useful for forecasting episodes of volcanic unrest in certain active volcanoes, including Poás, Costa Rica; Kusatsu-Shirane, Japan; and Mt. Ruapehu, New Zealand. In this study, we have improved the current geochemical monitoring of El Chichón volcano through the setting of optimal high-performance liquid chromatography conditions (HPLC) for the analysis of S²⁻, SO₃²⁻, S₂O₃²⁻, S₄O₆²⁻ and SO₄²⁻ using a common chromatographic system. The procedure was applied to the analysis of lake samples taken in March, July and October of 2014 and April of 2015. The results were promising, since nearly all species were detected (with the exception of S₂O₃²⁻) in measurable amounts, including S²⁻ (<0.85–5.05 mg/L), SO₃²⁻ (<2.77–26.1 mg/L), S₄O₆²⁻ (108.27–303.82 mg/L) and SO₄²⁻ (489.58–676.26 mg/L). The spatial distribution of these species along the lakeshore showed zones of increased concentrations to the east and southeast of the lake, which provides information on the distribution of faults or cracks that feed hydrothermal fluids to the lake. This method thus provides additional information linked to the volcanic and hydrothermal activity of the volcano.     

准噶尔盆地滴西地区石炭系火山岩储集性能分布规律研究

火山岩储集性能分布的非均质性非常强,探索其分布规律成为火山岩油气勘探的难点和重要任务。本文以实际岩心及其分析化验等资料为基础,从滴西地区取心最佳储集性能段、最差储集性能段、风化壳储集性能分布模式、薄层熔岩储集性能分布模式、厚层熔岩储集性能分布模式等方面总结了石炭系火山岩储集性能的垂向分布规律,同时分析了储集性能的平面分布情况。火山熔岩储集性能在垂向上的分布差异,成岩阶段主要受岩相的影响,后期主要受构造作用及风化溶蚀作用等的影响。受成岩阶段岩相的影响,溢流相上部亚相和下部亚相均有可能形成较好的储集性能。与碎屑岩互层的薄层熔岩常具有较好的储集性能。与碎屑岩互层的厚层熔岩段的底部储集性能可能较好,其次是顶部,而中部常沦落为储集性能相对较差的位置。风化壳的风化粘土层、强风化带、中等风化带、弱风化带、未风化带5个垂向分带结构中,中等风化带往往具备相对最佳的储集条件。应用W风化指数新型工具对火山岩进行风化程度评估显示,准噶尔盆地火山岩具有多期风化的特征,并残留有大量未风化、轻微风化及中等风化的火山岩,这其中不乏储集性能优良的岩性段。从平面分布来看,研究区域火山岩储集性能具有强烈的各向异性特征,常表现为局部富集,快速变迁,随机分布。