滇中红层工程地质特性研究

介绍滇中红层形成的地质历史背景,红层分布范围,主要地层岩性及区内地质构造。重点讨论滇中红层特别是红层软岩的岩体原生结构,及后期受构造改造的岩体结构特性,岩体风化特性,岩体水理作用特性,岩体物理力学性质等四方面的工程地质特性。     

Three mechanisms of ore re-mobilisation during amphibolite facies metamorphism at the Montauban Zn–Pb–Au–Ag deposit

The relative importance of mechanical re-mobilisation, hydrothermal dissolution and re-precipitation, and sulphide melting in controlling redistribution of metals during concurrent metamorphism and deformation is evaluated at the middle amphibolite facies Montauban deposit in Canada. As at many other deposits, ductile deformation was important in driving mechanical re-mobilisation of massive sulphides from limb regions into hinge regions of large-scale folds and is thus the most important for controlling the economics of Pb and Zn distribution. Two possible stages of hydrothermally driven re-mobilisation are discussed, each of which produces characteristically different alteration assemblages. Prograde hydrothermal re-mobilisation is driven by pyrite de-sulphidation and concurrent chlorite dehydration and is thus an internally driven process. At Montauban, the H₂S-rich fluid generated through this process allowed re-mobilisation of gold into the wall rock, where it was deposited in response to sulphidation of Fe Mg silicates. Retrograde hydrothermal re-mobilisation is an externally driven process, whereby large volumes of fluids from outside the deposit may dissolve and re-precipitate metals, and cause hydration of silicate minerals. This second hydrothermally driven process is not recognised at Montauban. Sulphide melting occurred as temperatures neared the peak metamorphic conditions. Melting initiated in the massive sulphides through arsenopyrite breakdown, and a small volume of melt was subsequently re-mobilised into the wall rock. Trace element partitioning and fractional crystallisation of this melt generated a precious metal-rich fractionate, which remained mobile until well after peak metamorphism. Thus, prograde hydrothermal re-mobilisation and sulphide melting were the most important mechanisms for controlling the distribution of Au and Ag.     

随机-模糊处理方法在岩石力学指标统计及岩组划分中的应用

探讨了随机 模糊处理方法在岩石力学指标统计和岩组定量划分中的应用。文中对计算中的隶属函数取值及迭代方式进行了深入讨论。通过计算结果的比较分析, 认为随机 模糊处理方法更符合实际, 并优于其他方法。最后作者提出了岩组定性划分 岩石样本参数的随机 模糊统计分析 岩组定量划分及参数重新统计的分析程序。     

大同盆地内砂板梁上断裂新活动及其力学实验模拟

通过野外实地考察、野外现场力学实验及室内力学实验模拟断裂的新活动，来研究砂板梁新隆起的活动构造特征和类型。旨在从实验模拟与野外实践相结合的基础上，对活动构造，特别是对断裂新活动在第四纪松散沉积层中特殊的表现形式进行研究，寻找第四纪松散沉积层中断裂新活动的有效识别标志，这是准确判定断裂新活动的关键，对工程地质评价及区域性地震危险性分析有很好的实用价值     

暖温带地理景观中土壤硒的分异特征

本文按垂直自然带谱研究了暖温带地理景观中山地草旬土、山地棕壤、山地淋溶褐土和潮土中硒的分异特征。结果表明：（1）硒在土剖面上的分异，除受生物富集的影响外，淋溶和粘人作用强烈地制约着硒在剖面上的迁移；（2）不同机械组分中的硒含量以粘粒中最高，呈明显的粘粒＞细粉粒＞中粉粒＞砂粒序列。因此，成土过程中，不同机械组分以及次生或们生矿物和垂直运动和自然分选作用对土壤硒的地理分异具有非常重要的作用。（3）易于淋溶失的有机态或钙结合的硒对所研究的土壤表层硒的贡献都大于50％。提出淋溶作用是我国低硒带形成的主要外营力。     

由多个震源机制解分析甘肃及边邻地区应力场特征

基于震源断层面解的空间取向和断层滑动方向,由相应力轴张量在地理坐标系中的表达式,通过坐标旋转、代数平均可求得多个震源机制解的P、B、T轴参数的平均应力场。据甘肃及边邻地区的分区活动特征,将研究地区分为8个小区域,由各个区域内多个地震震源机制解,采用力轴张量计算法,得到了各个区应力张量的定量分析结果。     

Experimental research on the mechanical properties of methane hydrate-bearing sediments during hydrate dissociation

This paper describes studies of the effect of hydrate dissociation on the safety and stability of methane hydrate-bearing sediments. Methane hydrates within the sediments were dissociating under the conditions of a confining pressure of 0.5 MPa, 1 MPa, 2 MPa and a temperature of −5 °C. After 6 h, 24 h, or 48 h, a series of triaxial compression tests on methane hydrate-bearing sediments were performed. The tests of ice-clay and sediments without hydrate dissociation were performed for comparison. Focusing on the mechanical properties of the sediments, the experimental results indicated that the shear strength of the ice-clay mixtures was lower than that of the methane hydrate-bearing sediments. The strength of the sediments was reduced by hydrate dissociation, and the strength tended to decrease further at the lower confining pressures. The secant modulus E_S of the sediments dropped by 42.6% in the case of the dissociation time of the hydrate of 48 h at the confining pressure of 1 MPa; however, the decline of the initial yield modulus E₀ was only 9.34%. The slower hydrate dissociation rate contributed to reducing the failure strength at a declining pace. Based on the Mohr–Coulomb strength theory, it was concluded that the decrease in strength was mainly affected by the cohesive reduction. Moreover, the mathematical expression of the M–C criterion related to the hydrate dissociation time was proposed. This research could be valuable for the safety and stability of hydrate deposits in a permafrost region.     

剪切速率对结构性吹填软土力学特性影响试验研究

黏土在剪切变形过程中,剪切速率的不同会对其结构破坏产生不同影响,从而影响其力学特性.本文以天津滨海新区吹填软土为研究对象,在对吹填软土关于结构性讨论的基础上,开展了剪切速率对其力学性状影响的三轴试验研究,分析其剪切速率力学效应.试验结果表明:随着剪切速率的提高,在低围压条件下,吹填软土的强度及其结构屈服应力均先减小后增大,存在临界剪切速率,而在高围压条件下,强度及其结构屈服应力则逐渐增大,与剪切速率呈正相关关系,临界剪切速率逐渐消失; 吹填软土的黏聚力在不同围压下随剪切速率提高均呈现减小趋势,内摩擦角在低围压条件下随剪切速率提高呈现增大趋势,在高围压条件下则随剪切速率提高呈现减小趋势; 在剪切过程中,孔隙水压力均随着轴向应变的增大到某一值然后稳定下来,随着围压的进一步加大,孔隙水压力的稳定值会随剪切速率的提高呈减小趋势.     

地震滑坡危险性概念和基于力学模型的评估方法探讨

在我国大陆地区运用基于力学模型的Newmark位移分析方法开展地震滑坡危险性定量评估,尚处在起步阶段.为了进一步明确地震滑坡危险性概念和改进推广基于力学模型的评估方法,首先阐明了狭义的地震滑坡危险性预测评估与震后反演评估的关系; 同时为了应对地震应急、震后重建及潜在地震条件下的不同评估需求,初步提出了广义的地震滑坡危险性评估框架.随后申述了基于Newmark位移分析的地震滑坡危险性评估方法的理论基础、方法分类及最新进展,并以汶川地震滑坡危险性快速评估为例,剖析了目前影响评估有效性的不确定性及空间数据质量等问题,指出了基于力学模型的地震滑坡危险性评估方法的改进方向.建议开展潜在地震及其诱发滑坡危险性的耦合评估,建立适用于我国大陆地区地震滑坡位移分析的经验模型,以便为国家层面的地震滑坡危险性区划服务.     

任一力学量■的矩阵元Fmn的微扰近似计算

本文以能量和波函数的各级微扰近似的基态展开式为基础,推导出任一力学量的矩阵元F_(mn)的各级微扰近似表示式。并且指出只要构成能量展式的级数收敛很快,满足能够应用微扰的条件,那么对于任一力学量F的微扰计算,只要计算矩阵元F_(mn)的前二级近似就已足够精确。