福建第四纪活断裂岩石显微构造特征与孕震标志研究

在福建第四纪活断裂调查研究基础上,进一步详细观察活动断裂面的擦痕、阶步、断层泥、蚀变程度的对比,并采集断面岩石切片,作显微构造观察,结合宏观断裂特征、震源机制解、地震破裂形迹,探讨宏、微观地震断裂破裂力学特性,试图为本区强震的中长期预测提供新的标志.     

Fracture development in Paleozoic shale of Chongqing area (South China). Part two: Numerical simulation of tectonic stress field and prediction of fractures distribution

A tectonics sedimentation evolution has been researched in Southeast Chongqing, and the reasonable Longmaxi shale highstand system tract (HST) and transgressive system tract (TST) geological model were built respectively based on the rock mechanical test and acoustic emission experiment which the samples are from field outcrop and the Yuye-1 well. The Longmaxi shale two-dimension tectonic stress field during the Cenozoic was simulated by the finite element method, and the distribution of fractures was predicted. The research results show that the tectonic stress field and the distribution of fractures were controlled by lithology and structure. As a result of Cretaceous movement, there are trough-like folds (wide spaced synclines), battlement-like folds (similar spaces between synclines and anticlines) and ejective folds (wide spaced anticlines), which are regularly distributed from southeast to northwest in the study area. Since the strain rate and other physical factors such as the viscosity are not taken into account, and the stress intensity is the main factor that determines the tectonic strength. Therefore, the stronger tectonic strength leads the higher stress intensity in the eastern and southeastern study area than in the northwest. The fracture zones are mainly concentrated in the fold axis, transition locations of faults and folds, the regions where are adjacent to faults. The fragile mineral contents (such as siliceous rock, carbonate rock and feldspar) in the shelf facies shale from south of the study area are higher than in the bathyal facies and abyssal facies shale from center of the study area. The shales characterized by low Poisson’s ratio and high elastic modulus from south of the study area are easily broken during Cenozoic orogenic movement.     

Provisional Elemental Values for IAEA‐Sewage Sludge by Instrumental Neutron Activation Analysis

The International Atomic Energy Agency (IAEA) organised a proficiency test (PT), IAEA‐CU‐2010‐02, for the determination of elements in sewage sludge. The PT sample was analysed by semi‐absolute standardless k₀‐instrumental neutron activation analysis (k₀‐INAA). Results for seven elements (As, Co, Cr, Fe, Hg, Se, Zn) were submitted to the IAEA by our laboratory. All of our results were scored ‘acceptable’ by the ‘result evaluation criteria’ adopted by the IAEA. The same analytical methodology produced quantitative results for twenty‐six additional elements. In total, thirty‐six elements were determined with uncertainty varying from 4 to 11%. This paper presents the provisional mass fractions of twenty‐six additional elements (Ag, Al, Br, Ca, Ce, Cl, Dy, Eu, Ga, Hf, I, K, La, Mg, Mn, Na, Rb, Sb, Sc, Sm, Ta, Tb, Th, V, U, W) not reported by the IAEA. The analytical methodology was discussed with important sources of spectral, nuclear and fission‐product interferences. It was shown that the important components of uncertainties were the k₀ factor, Q₀ factor, detector efficiency, mass and counting statistics. The methodology was validated by analysing the IAEA‐S7 reference material.     

金刚石-cBN-硬质合金复合柱齿的理论分析

通过多种分析手段对所研制的金刚石-立方氮化硼(cBN) -硬质合金超硬复合柱齿进行了深入的研究分析, 得出了由于B的烧结促进和强化作用、Ni-P的活化烧结作用以及cBN加入, 大大提高了超硬复合柱齿的性能, 同时还分析指出, 在金刚石与基体合金之间存在过渡区, 该过渡区能有效地保护金刚石免受高温损伤, 另外, 该过渡区还大大增强了基体与金刚石之间的结合强度.      

Influence of sedimentary environments on mechanical properties of clastic rocks

The sedimentary environments are the intrinsic factor controlling the mechanical properties of clastic rocks. Examining the relationship between rock sedimentary environments and rock mechanical properties gives a better understanding of rock deformation and failure mechanisms. In this study, more than 55 samples in coal measures were taken from seven different lithologic formations in eastern China. Using the optical microscope the sedimentary characteristics, such as components of clastic rocks and sizes of clastic grains were quantitatively tested and analyzed. The corresponding mechanical parameters were tested using the servo-controlled testing system. Different lithologic attributes in the sedimentary rocks sampled different stress–strain behaviors and failure characteristics under different confining pressures, mainly due to different compositions and textures. Results demonstrate that clastic rocks have the linear best-fit for Mohr-Coulomb failure criterion. The elastic moduli in clastic rocks are highly dependent upon confining pressures, unlike hard rocks. The envelope lines of the mechanical properties versus the contents of quartz, detritus of the grain diameter of more than 0.03 mm, and grain size in clastic rocks are given. The compressive strength or elastic modulus and the grain diameter have a non-monotonic relation and demonstrate the “grain-diameter softening” effect.     

Use of clay as a pozzolona in high strength Portland cement and its thermal activation

In this investigation local clay from Cherat mines, Nowshera District, NWFP, Pakistan, has been tested as a pozzolanic material in high strength Portland cement. Thermal treatments were performed as a means of activation of the clay. It was found that thermal treatment of the clay can increase its pozzolanic activity. Different blended mortars, containing different amounts of clay, activated at different temperatures were studied for compressive strength, consistency, and setting times. It was concluded that the mechanical properties of the blended cements were mainly governed by the percentage of incorporation of the calcined clay. Blended cement composition has been formulated, with optimal results of 20% calcined clay at a temperature of 600℃.     

Relationships between texture and mechanical properties of hybrid rocks from the Jaala–Iitti complex, southeastern Finland

The relationships between petrographical and mechanical properties of rock aggregate raw materials from the hybridised, subvolcanic Jaala–Iitti complex, southeastern Finland, were investigated. Petrography was quantified from polished thin sections with a polarising microscope to determine the modal composition and grain size distribution, and resistance to fragmentation and abrasion were determined. Abundance of fine-grained minerals (especially of hornblende), fine grain size-dominated grain size distribution, uniform spatial dispersion of hornblende crystals, and intense micrographic intergrowth texture with interlocking grain boundaries were found to have the greatest positive influence on the mechanical properties. The results showed the potentiality of hybridised rocks as raw materials for high quality aggregates that can resist fragmentation and abrasion.     

Kinetics and Equilibrium Sorption Studies of 4-Nitrophenol on pyrolyzed and activated oil shale residue

Sorption of the organic pollutant 4-nitrophenol (4-NP) by pyrolyzed and activated Jordanian oil-shale was studied. Pyrolyzed oil shale was prepared using a fluidized bed reactor at 520 °C in the presence of nitrogen. Physical activation was carried out by treating the pyrolyzed oil shale with CO₂ at 830 °C, while chemical activation was achieved by using KOH and ZnCl₂ as impregnating agents. Batch kinetics and isotherm studies were conducted to evaluate the sorption process. Effects of contact time, initial sorbate concentration, sorbent concentration, temperature, pH and inorganic salts (NaCl and KCl) on the sorption process by the different sorbents were considered. Chemically activated oil shale, pretreated with ZnCl₂, gave the highest uptake of 4-NP. The isotherm experimental data fit reasonably well to Langmuir, Freundlich and Redlich-Paterson models. Three kinetic models, namely the Morris-Weber, Lagergren, and Pseudo-Second-Order model (PSOM), were applied to represent the experimental results for both pyrolyzed and ZnCl₂-oil shale sorbents.     

坡缕石粘土的酸化机理及其影响因素

酸化生产活性坡缕石粘土,对于提高其品位和高效利用有重要意义。坡缕石粘土酸化机理及影响因素研究对其高效利用具有重要理论意义和实践价值。本文综述了酸化坡缕石粘土矿物组分、矿物学、比表面和孔道变化的特征以及酸化的主要影响因素等,并就坡缕石粘土酸化过程中存在的问题及研究方向做了简要论述。     

东濮凹陷沙一段源岩的成烃动力学参数特征

运用成烃动力学原理对东濮凹陷沙一段源岩进行研究表明,沙一段源岩中的成烃有机质具有非均质性．沙一段目前正在生烃的活化能范围为90kJ／mol～110kJ／mol之间．对应的成熟生烃门限埋深约在2200m左右。该结果为评价沙一段源岩提供了基于动力学上的证据．同时对推进沙一段的油气勘探具有积极意义。