文章已录用：阴山晚中生代板内造山特征及其动力机制-以内蒙古大青山为例

内蒙古大青山属我国典型的板内造山带阴山山脉的南部山系,其西段缺少大型低角度推覆构造及大型深成岩对前期演化历史的干扰,是研究阴山板内造山特点及过程的理想区域。通过对大青山西段的构造进行几何学和运动学的分析表明,古老结晶基底以逆冲推覆及基底褶皱的形式广泛的巻入中生代构造变形,以及先存构造样式的广泛复活并对后期地层沉积和断层发育的控制作用是内蒙古大青山地区中生代板内造山的两个基本特征。这些变形特征反映了阴山带板内造山过程中,是以结晶基底为受力层,并控制上覆盖层进行构造变形的,进而表明板内造山主要是由水平挤压应力造成的。结合研究区构造变形特点及邻区中生代构造地质情况的分析认为,晚侏罗世时期之所以在阴山带形成强烈的板内造山运动,是由其北部西伯利亚板块与蒙古褶皱带碰撞产生的板缘应力的远程传递,以及其南侧强硬的鄂尔多斯地块的阻挡共同作用而形成的。     

STUDY ON PALEOEARTHQUAKES ALONG THE JINGHE SECTION OF BOLOKENU-AQIKEKUDUKE FAULT

The Bolokenu-Aqikekuduk fault zone(B-A Fault)is a 1 000km long right-lateral strike-slip active fault in the Tianshan Mountains. Its late Quaternary activity characteristics are helpful to understand the role of active strike-slip faults in regional compressional strain distribution and orogenic processes in the continental compression environment, as well as seismic hazard assessment. In this paper, research on the paleoearthquakes is carried out by remote sensing image interpretation, field investigation, trench excavation and Quaternary dating in the Jinghe section of B-A Fault. In this paper, two trenches were excavated on in the pluvial fans of Fan2b in the bulge and Fan3a in the fault scarp. The markers such as different strata, cracks and colluvial wedges in the trenches are identified and the age of sedimentation is determined by means of OSL dating for different strata. Four most recent paleoearthquakes on the B-A Fault are revealed in trench TC1 and three most recent paleoearthquakes are revealed in trench TC2. Only the latest event was constrained by the OSL age among the three events revealed in the trench TC2. Therefore, when establishing the recurrence of the paleoearthquakes, we mainly rely on the paleoearthquake events in trench TC1, which are labeled E1-E4 from oldest to youngest, and their dates are constrained to the following time ranges: E1(19.4±2.5)~(19.0±2.5)ka BP, E2(18.6±1.4)~(17.3±1.4)ka BP, E3(12.2±1.2)~(6.6±0.8)ka BP, and E4 6.9~6.2ka BP, respectively. The earthquake recurrence intervals are(1.2±0.5)ka, (8.7±3.0)ka and(2.8±3)ka, respectively. According to the sedimentation rate of the stratum, it can be judged that there is a sedimentary discontinuity between the paleoearthquakes E2 and E3, and the paleoearthquake events between E2 and E3 may not be recorded by the stratum. Ignoring the sedimentary discontinuous strata and the earthquakes occurring during the sedimentary discontinuity, the earthquake recurrence interval of the Jinghe section of B-A Fault is ~1~3ka. This is consistent with the earthquake recurrence interval(~2ka)calculated from the slip rate and the minimum displacement. The elapsed time of the latest paleoearthquake recorded in the trench is ~6.9~6.2ka BP. The magnitude of the latest event defined by the single event displacement on the fault is ~M_W7.4, and a longer earthquake elapsed time indicates the higher seismic risk of the B-A Fault.     

Strong historical earthquakes in the northwestern Issyk Kul’ basin (northern Tien Shan)

The northern Tien Shan is the northern front of the Himalayan mountain belt, which resulted from the collision between the Indian and Eurasian Plates. This region encompasses the most active seismic zones of the orogen, which generated the strongest (M > 8) earthquakes. Since there are scarcely any written accounts, the only way to trace back strong earthquakes is the paleoseismologic method. Since 1984 we have been studying the northwestern Issyk Kul’ basin, where there are differently directed anticlines, which constitute the Kungei meganticline. Here, several active tectonic structures (faults, folds) are located, whose development was accompanied by strong earthquakes. Our field studies of 2008 in the Iiri-Taldybulak Valley, along the adyrs (foothills) of the Kungei-Ala-Too Range, revealed two unknown historical earthquakes. The first one, which occurred along the southern rupture in the late 7th century A.D., gave rise to a seismic scarp; the latter broke through the river floodplain and a tash-koro (ancient settlement). The second one, which occurred along the northern rupture in the late 9th century A.D., increased the height of the seismic scarp, existing on the Early Holocene and older terraces. Note that this region already records a strong seismic event around 500 A.D. Archeologic data have revealed one more strong earthquake, which took place in the 14th century A.D. Note that the above-mentioned strong seismic events are coeval with the decline of the nomadic cultures (Wusun, Turkic, Mogul) in the northern Tien Shan and Zhetysu (Semirech’e).     

Late Jurassic-Early Cretaceous Northern Qaidam Basin, NW China: Implications for the earliest Cretaceous intracontinental tectonism

Formation of Mesozoic western China, which was dominated by tectonic amalgamation along its southern margin and associated intracontinental tectonisms, holds a key for interpreting the succedent Cenozoic evolution. This paper presents new data including lithology, sedimentary facies, stratigraphic contact, seismic interpretation and paleo-structures within the Upper Jurassic-Lower Cretaceous strata in the northern Qaidam Basin, NW China. These data all account for a contractional tectonic deformation in the earliest Cretaceous. The South Qilian Shan, according to the sedimentary features and provenance analysis, reactivated and exhumated during the deformation, controlling the deposition of the Lower Cretaceous sequences. A simplified model for the Late Jurassic-Early Cretaceous paleogeography and tectonics of the northern Qaidam Basin is accordingly proposed. The results also support a ∼25° clockwise rotation of the Qaidam Basin since the Early Cretaceous and a more accurate Mesozoic evolution process for the basin. This earliest Cretaceous deformation, associated with the reactivation of the South Qilian Shan at the time, are part of the intracontinental tectonisms in central Asia during the Mesozoic, and probably driven by both the closure of the Mongol-Okhostk Ocean to the north and the collision of the Lhasa and the Qiangtang blocks to the south.     

会理县小青山铜金矿区硅质钠长石岩研究

岩石空间产出特征、岩相学、岩石化学、稀土元素地球化学特征及成岩成矿作用特征等分析研究表明,硅质钠长石岩是经沉积变质、硅质钠质交代作用形成的,原岩组成多样,主要为碳质板岩,其次为条带状泥砂质白云岩,局部也可以是辉绿辉长岩。     

白马雪山冰川槽谷发育的形态特征及其影响因素探讨

白马雪山地处横断山脉腹地,对于重建西南季风影响区的环境变迁以及探讨冰川作用特点具有重要科学意义。这里保留着典型的晚第四纪冰川侵蚀地貌,其中冰川槽谷发育特征明显。本文运用抛物线形态参数、梯级宽深比、形态比率等定量分析冰川槽谷的研究方法,对保存在白马雪山主峰扎拉雀尼(5429m)东北坡的两条简单冰川槽谷的形态特征进行分析。采用7个典型剖面的形态特征参数与其他地区对比,探讨冰川槽谷发育的可能影响因素如水热条件、冰川性质、冰川规模、岩性特点、冰川作用时间等。结果显示: 白马雪山冰川槽谷抛物线形态参数b值为1.779,明显小于冰川性质相同的螺髻山(1.835),主要是由于区域降水条件的不同所造成的差异,而与冰川性质不同天山乌鲁木齐河源区(1.825)冰川槽谷的形态特征的差异,可能与冰川规模、作用时间以及岩性条件密切相关; 梯级宽深比中槽谷形态参数沿程变化可以反映冰川流动过程中的动力变化,梯级宽深比中的形态参数Af和Bf值最大处对应的谷肩位置接近雪线位置。根据槽谷谷肩的位置确定末次冰期早期/中期的雪线高度为4140m,这与用地貌法如冰斗底部高程法、侧碛堤最大高度法和冰川末端至冰斗后壁最大高度法等综合确定的雪线高度4092m基本一致。因此,在冰川槽谷发育的冰川作用区,用槽谷谷肩的海拔高度估算雪线高度可以成为一种比较可靠的确定古雪线方法; 白马雪山的冰川槽谷形态参数b-FR的特征表明,即使是海洋性冰川作用区也不符合Hiran和Aniya提出的山地冰川模式,但运用b-FR相关关系可以很好的反映冰川的侵蚀过程。白马雪山地区冰川侧蚀作用导致槽谷坡降值较小,底部较平坦宽阔,呈现出相对完整的U型形态。此外,用形态比率FR值也可以验证雪线的位置高度。     

Cenozoic high-K alkaline magmatism and associated Cu–Mo–Au mineralization in the Jinping–Fan Si Pan region,southeastern Ailao Shan–Red River shear zone,southwestern China–northwestern Vietnam

The Jinping–Fan Si Pan (JFP) Cenozoic magmatic and Cu–Mo–Au metallogenic belt in the southeastern part of the Ailao Shan shear zone host the Tongchang, Chang′an, Habo, and Chinh Sang Cu–Mo–Au deposits. These deposits form an integrated epithermal-porphyry regional mineralization system associated with 40–32 Ma high-K alkaline magmatism. The magmatic rocks in the belt have relatively low TiO₂ (<0.73 wt%), P₂O₅ (<0.29 wt%), and FeO^* (<4.99 wt%), and high Na₂O (2.86–4.75 wt%) and K₂O (4.01–7.98 wt%). They also have high contents of incompatible trace elements, and are enriched in LILE (Rb, Ba, K, Sr) and LREE. They have marked Nb, Ta, Ti and P depletion in primitive mantle-normalized spidergrams, and plot close to the EMII mantle field in the Sr–Nd isotopic diagram. These characteristics are similar to those of the Eocene high-K alkaline rocks along the northern Ailao Shan belt, eastern Tibet plateau. The sulfur and lead isotope analyses of sulfide minerals from both the ores and related magmatic rocks confirm the involvement of a magmatic ore fluid. The Cenozoic alkaline intrusions and Cu–Mo–Au mineralization in the JFP were formed prior to the initiation of left-lateral shearing along the Ailao Shan shear zone. The magmas appear to have been derived from enriched mantle, possibly with mixing of materials from the buried Tethyan oceanic lithosphere, and/or crust.     

大别山双河片麻状花岗岩岩体石英组构特征及应变分析

对大别山双河片麻状花岗岩岩体中的石英C轴组构、黑云母(001)解理极点和石英颗粒三维应变分别进行系统测量。结果显示,双河岩体在侵位和后期演化过程中以挤压变形为特点,岩体经过NW-SE向和NE-SW向两次挤压,NW-SE向挤压强度较大,奠定了岩体基本的构造形态。结合区域应力场特征分析得出,双河岩体在早三叠世至早侏罗世应力方位为NW-SE向挤压,中侏罗世及后期为NE-SW向挤压,应力场发生顺时针变化。      

点苍山-哀牢山变质杂岩带变沉积岩的变质演化

点苍山-哀牢山变质杂岩带位于青藏高原东南缘大理-元江-元阳-河口一带,出露规模达数百千米,是扬子板块和印支陆块之间的一条重要构造带.该变质杂岩带主要由各类正片麻岩、副片麻岩、大理岩所组成,夹有斜长角闪岩、石榴辉石岩和超镁铁质岩石的透镜体或团块.其中,变沉积岩如含夕线石和蓝晶石的片麻岩类岩石保存了多阶段的矿物组合及异常复杂的矿物相转变关系.详细的岩相学、成因矿物学以及矿物相转变关系分析表明,变沉积岩系经历了早期进变质阶段(M1)、峰期角闪-麻粒岩相变质阶段(M2)、峰后近等温减压(脱水熔融)阶段(M3)以及晚期退变质阶段(M4)的变质演化.其中,M1阶段的稳定矿物组合为石榴石+斜长石+白云母+石英+十字石±蓝晶石±黑云母±钾长石,M2阶段的稳定矿物组合为石榴石+黑云母+蓝晶石/夕线石+斜长石+石英、石榴石+黑云母+斜长石+石英±钾长石±夕线石,M3阶段的共生矿物组合为石榴石+黑云母+夕线石+斜长石+石英,M4阶段的矿物组合为黑云母+白云母+斜长石+石英±钾长石±石榴石等.通过传统GB-GASP温压计和二云母温度计的估算结果,配合P-T视剖面定量计算,确定早期进变质阶段(M1)的温压条件为T=560 ～ 590℃,P=5.5 ～6.3kb,峰期角闪-麻粒岩相阶段(M2)的温压条件为T=720～ 760℃、P=8.0～9.3kb,峰后近等温减压阶段(M3)的温度压力条件为T=640～760℃,P=5.0～7.3kb,晚期退变阶段(M4)的温压条件为T=521～648℃,P=4.0～5.0kb.上述研究结果表明,点苍山-哀牢山变沉积岩记录了典型碰撞造山带型式的顺时针P-T演化轨迹,表明点苍山-哀牢山变质杂岩带的形成与印度板块和欧亚板块之间的俯冲-碰撞存在密切的成因关系.     

Influence of dissolution/reprecipitation reactions on metamorphic greenschist to amphibolite facies mica 40Ar/39Ar ages in the Longmen Shan (eastern Tibet)

Linking ages to metamorphic stages in rocks that have experienced low‐ to medium‐grade metamorphism can be particularly tricky due to the rarity of index minerals and the preservation of mineral or compositional relicts. The timing of metamorphism and the Mesozoic exhumation of the metasedimentary units and crystalline basement that form the internal part of the Longmen Shan (eastern Tibet, Sichuan, China), are, for these reasons, still largely unconstrained, but crucial for understanding the regional tectonic evolution of eastern Tibet. In situ core‐rim ⁴⁰Ar/³⁹Ar biotite and U–Th/Pb allanite data show that amphibolite facies conditions (~10–11 kbar, 530°C to 6–7 kbar, 580°C) were reached at 210–180 Ma and that biotite records crystallization, rather than cooling, ages. These conditions are mainly recorded in the metasedimentary cover. The ⁴⁰Ar/³⁹Ar ages obtained from matrix muscovite that partially re‐equilibrated during the post peak‐P metamorphic history comprise a mixture of ages between that of early prograde muscovite relicts and the timing of late muscovite recrystallization at c. 140–120 Ma. This event marks a previously poorly documented greenschist facies metamorphic overprint. This latest stage is also recorded in the crystalline basement, and defines the timing of the greenschist overprint (7 ± 1 kbar, 370 ± 35°C). Numerical models of Ar diffusion show that the difference between ⁴⁰Ar/³⁹Ar biotite and muscovite ages cannot be explained by a slow and protracted cooling in an open system. The model and petrological results rather suggest that biotite and muscovite experienced different Ar retention and resetting histories. The Ar record in mica of the studied low‐ to medium‐grade rocks seems to be mainly controlled by dissolution–reprecipitation processes rather than by diffusive loss, and by different microstructural positions in the sample. Together, our data show that the metasedimentary cover was thickened and cooled independently from the basement prior to c. 140 Ma (with a relatively fast cooling at 4.5 ± 0.5°C/Ma between 185 and 140 Ma). Since the Lower Cretaceous, the metasedimentary cover and the crystalline basement experienced a coherent history during which both were partially exhumed. The Mesozoic history of the Eastern border of the Tibetan plateau is therefore complex and polyphase, and the basement was actively involved at least since the Early Cretaceous, changing our perspective on the contribution of the Cenozoic geology.