华南热水成因硅质岩建造的稀土元素地球化学特征

本文在华南地区若干个重要层位热水成因硅质岩建造的稀土元素地球化学数据的基础上,讨论了热水成因硅质岩的REE特征及其与形成环境的关系。指出典型热水沉积建造的δCe为负异常,而δEu为正异常,且LREE>HREE;这种热水成因的硅质岩REE总量普遍较低,且有从热水喷口向外REE总量增高的趋势。热水成因硅质泥岩与正常沉积成因硅质泥的混合存在使稀土元素分布状况变得更复杂。     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

Chemical weathering intensity and element migration features of the Xiashu loess profile in Zhenjiang, Jiangsu Province

The chemical weathering intensity and element migration features of the Xiashu loess profile in Zhenjiang are studied in this paper. (1) The Xiashu loess profile underwent moderate chemical weathering. It seems that the precipitation is a more important factor than the temperature in controlling the process of the chemical weathering. (2) The major elements such as Si, K, Na, Ca, Mg, Mn and P were migrated and leached, while the elements Fe and Ti were slightly enriched. The migration features of the major elements reveal that the Xiashu loess finished the primary process of chemical weathering characterized by leaching of Ca and Na, and almost reached the secondary process characterized by leaching of K. Except the elements Sr and Ga, other trace elements such as Th, Ba, Cu, Zn, Co, Ni, Cr and V were enriched. It might be caused by both the biogeochemical process and the adsorption of trace elements by clay mineral and organic materials. (3) The difference of element migration down the Xiashu loess profile reveals that the climate was warm and wet at the early-middle stage of the middle Pleistocene. At the end of the middle Pleistocene, it became dry and cool. At the early stage of the Late Pleistocene, the paleoclimate became warm and wet again. As a whole, the paleoclimate generally became drier and cooler in this region from the beginning of the middle Pleistocene.     

弹道扰动引力的有限元逼近算法

为了克服多项式逼近弹道扰动引力的缺点，根据有限元插值的原理，采用了对弹道周围空间区域进行有限元剖分的方法，利用剖分单元各顶点的扰动引力分量内插出弹道点对应的扰动引力分量值。结果表明，文中提出的逼近算法能够快速精确可靠地逼近弹道扰动引力，是一种具有应用价值的方法。     

粤北佛冈岩体中粒斑状花岗岩地球化学、年代学及地质意义

佛冈岩体是南岭地区最大的复式岩基,主体岩性为中粒斑状黑云母二长花岗岩,近期在佛冈岩体北缘新发现了大型离子吸附型稀土矿床。对佛冈花岗岩岩石样品进行了LA-ICP-MS锆石U-Pb定年,得出结晶年龄分别为160.5±2.9Ma、161.9±2.6Ma和164.5±2.4Ma,表明岩体形成于中晚侏罗世。岩体具有高硅、富碱富铝的特征(K2O/Na2O=1.48~2.17,A/CNK=1.05~1.27),属钙碱性过铝质钾玄质花岗岩;富集Rb、Th、U、K、Pb、Nd、Zr和Hf等元素,亏损Ba、Nb、Ta、La、Ce、Sr、P和Ti等元素,具明显的负Eu异常(δEu=0.17~0.41)。初步研究结果表明,佛冈岩体主体由上地壳砂-泥质岩在高温条件下部分熔融而成,是陆壳改造型(即S型)花岗岩,形成于古太平洋板块向欧亚板块俯冲的构造背景。     

锇粉中杂质元素分析方法研究

利用ＩＣＰ＿ＭＳ技术建立了锇粉中痕量杂质元素的分析方法。在浓ＨＮＯ３介质中,锇以ＯｓＯ４形式挥发除去,分离锇基体后,可直接测定的痕量元素达５０余种。取样量０．１ｇ,测定限为０．２～２４６ｎｇ／ｇ,可实现质量分数ｗ（Ｏｓ）为９９．９９９９％锇粉中杂质元素测定。结合ＩＣＰ＿ＡＥＳ测定Ｋ、Ｎａ、Ｃａ、Ｍｇ、Ａｌ、Ｆｅ、Ｓｉ和Ｐ,可实现锇粉原料及产品的纯度分析。     

有限元强度折减法在公路隧道中的应用探讨

将有限元强度折减法应用于隧道的稳定性评价。利用有限元强度折减法求得的安全系数与潜在滑动面,不仅可以评价隧道的稳定性和设计的合理性,还可以对支护参数和施工工艺提出改进建议。计算表明,泊松比? 的取值对塑性区范围影响很大,但对安全系数基本上没有影响;围岩等级越高,达到破坏状态时围岩的塑性区范围越大,破坏区却越小,安全系数越高;上覆岩体增厚,同类围岩塑性区范围和最大塑性应变值都增大,而安全系数减小。破坏时围岩等级高的隧道塑性区大,围岩等级低的反而小,因此,单纯根据塑性区范围大小来评判隧道的安全性是值得商榷的。     

Study on a new shear wall system with shaking table test and finite element analysis

A new seismic energy dissipation shear wall structure is proposed in this paper. The new shear wall is one with purposely built‐in vertical slits within the wall panel, and rubber belts as seismic energy dissipation devices are installed in the vertical slits. In order to verify this concept, shaking table tests of a 10‐storey shear wall model with rubber belts filled in the vertical slits were carried out, and comparison of seismic behaviour was made between the new shear wall system and a shear wall with reinforced concrete connecting beams as energy dissipation. Furthermore, the seismic behaviour of this new shear wall is analysed by a finite element time history analysis method. The test and analysis show that the new shear wall system has a very good ability to dissipate seismic energy and is easy to use in engineering practice. Copyright © 2000 John Wiley & Sons, Ltd.     

四川某崩塌区危岩稳定性评价

汶川地震后,在地震灾区及影响区形成了大量的危岩崩塌地质灾害。通过对崩塌区地质灾害的调查,结合所收集的地质资料,分析了崩塌地质灾害的形成机制以及危害性,并选择区内典型危岩及断面,采用危岩体平面滑动法及岩有限元应力分析法,对崩塌区危岩体在各种工况条件下的稳定性进行评价。评价结果表明:有限元应力分析法与公式计算结果基本吻合,与实际情况基本一致。此结果可为崩塌灾害防治提供依据。