Indirect Measurement of Suction

This paper reports on indirect soil suction measurement methods. Indirect suction measurement techniques measure the moisture equilibrium condition of the soil instead of suction. The moisture equilibrium condition of the soil can be determined by primary means as in vapor pressure, secondary means as through another porous medium or tertiary means as in measuring other physical properties of the porous medium that indicates its moisture equilibrium condition. Indirect suction measurement techniques employing primary means include thermocouple psychrometers, transistor psychrometer and chilled-mirror psychrometer. Indirect suction measurement techniques employing secondary means includes the filter paper method and indirect suction measurement techniques employing tertiary means include thermal conductivity sensors and electrical conductivity sensors. These techniques have been widely used in engineering practice and in research laboratories. However, each of these techniques has its own limitations and capabilities, and active research into improving these techniques is ongoing in universities, research laboratories, and private sector. This paper outlines working principles, calibration, measurement, and application areas of these methods based on recent literature and practice.     

Mechanical Testing in Unsaturated Soils

The state-of-the-art report presented herein is aimed at documenting, to the largest extent possible, some of the recent advances in laboratory testing of unsaturated soils for stress–strain–strength–stiffness characterization under suction-controlled isotropic, axisymmetric, and true triaxial stress states. The report is intended to be neither comprehensive nor fully inclusive, offering plenty of room for further discussion on recent refinements and techniques not yet reported in the literature. The main sections in this report are devoted to describing current methods and technologies using cylindrical triaxial systems, including advances in volume change measurements; resonant column/torsional shear systems; bender element-based systems; and suction-controlled testing under true triaxial stress states. Concluding remarks are included in the last section of the report.     

Laboratory Hydraulic Testing in Unsaturated Soils

This paper synthesizes the state-of-the art of the various laboratory testing techniques presently available for measuring the water hydraulic constitutive functions of unsaturated soils. Emphasis is on the laboratory testing techniques for measuring the soil–water retention curves and the water hydraulic conductivity functions of unsaturated soils. The significant recent advances in the investigation of the hydraulic behaviour of unsaturated swelling soils, are also presented. Comprehensive recent references on each measurement method are listed and discussed.     

Constitutive modeling of unsaturated aggregated soils

A coupled water retention–mechanical constitutive model for unsaturated aggregated soils is presented here. Based on the multi‐scale experimental results, the model incorporates the inter‐particle bonding, fabric and partial saturation effects in a single framework. It is formulated within the framework of hardening elasto‐plasticity and is based on the critical state concept. Prior to model validation, we evaluate the model parameters and propose determination procedures for the main new parameters. Finally, the model is examined for its capability in simulating the experimental results of aggregated and bonded soils. Results of these simulations show that the model addresses the most features arising from the combined effects of soil structure and partial saturation. Copyright © 2010 John Wiley & Sons, Ltd.     

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

Pullout behavior of suction anchors in soft marine clays

In the field of ocean engineering, a beginning has been made in the use of large‐sized suction anchors for safe anchoring of large compliant structures. Suction anchors derive most of their uplift resistance from passive suction developed during the pullout movement. This article describes a set of laboratory tests on model suction anchors of three different embedment ratios to estimate the pullout behavior of suction anchors in soft clays typical of Indian marine clays. Tests were conducted on model anchors installed in soil beds prepared at four different consistencies in a test tank. This study shows the influence of soil consistency and embedment ratio (L/D) on the pullout behavior of suction anchors and on the variation of suction pressure at the top of the soil plug. The test results reveal that the behavior of suction anchors is much better than the behavior of open‐ended anchors from the considerations of both capacity and deformation. The consistent development of suction inside the anchor top confirms the plug formation and significant breakout resistance in the form of suction‐induced reversed end bearing. The results are further analyzed in terms of suction breakout factors. Further, the effect of burial depth of suction anchor on pullout behavior is shown.     

海上吸力锚负压下沉渗流场的特性分析

采用8结点等参元的有限元方法，对海上吸力锚负压沉贯过程中锚体周围土体的渗流场进行了数值计算与分析，并给出了渗流场相关要素的计算方法，如水头、等势线、渗流力、渗流速度和渗流量等。通过对实例的分析，计算结果和结论令人满意，为吸力锚的设计等现实应用提供了依据。     

基质吸力对非饱和土抗剪强度的影响

在自然界和工程实践中遇到的土大多数是非饱和土,研究吸力对非饱和土抗剪强度的作用,对于工程实践具有重要的意义。通过压力板仪和直剪仪组合试验,探讨了击实土抗剪强度和基质吸力的关系。试验结果表明：凝聚力在饱和度为40%-60%时最大,而内摩擦角则随饱和度增加而有所减少。进一步对比土-水特征曲线与抗剪强度的关系,并整合前人研究成果,指出了非饱和土中吸力对其抗剪强度影响的规律。对于无黏性土,在边界效应区不产生假凝聚力,且内摩擦角不变;在过渡区与非饱和残余区,假凝聚力和基质吸力的关系存在峰值且变化较大,内摩擦角则随吸力增加而增加。对于黏性土,残余体积含水率所对应的最小吸力可能是影响抗剪强度的界限值,小于此吸力值,φb可近似为常数。但在非饱和残余区,凝聚力将随土状态路径的不同而变化。对于重塑土,凝聚力降低;而对于原状土,则凝聚力可能不变或增加。     

Swell pressure prediction by suction methods

Soil suction is the most relevant soil parameter for characterization of the swell behavior. An attempt was made to predict swell pressures from soil suction measurements. In this study, Na-bentonite was mixed with kaolinite in the ratios of 5, 10, 15, 20 and 25% of dry kaolinite weight to obtain soils in a wide range of plasticity indices (i.e. 30, 50, 68, 84 and 97%). Suction measurements using thermocouple psychrometer technique were made on statically compacted specimens. The dependence of soil suction on water content, dry density and bentonite content was examined. Soil suction was correlated to the soil properties, namely, water content, plasticity index, dry density, cation exchange capacity and specific surface area using multiple regression analyses. The correlations revealed a simple regression equation for a quick prediction of soil suctions from easily determined soil properties. In order to investigate soil suction versus swell pressure behavior, the results of standard constant volume swell tests (ASTM, 1990) performed on statically compacted samples of these clay mixtures were used. A linear relationship was established between the logarithm soil suction and the swell pressure. It was also found that an experimental relationship which would directly relate the initial soil suction to the swell pressure can be established.     

218P0测深法寻找基岩地下水实用研究

阐明了一种新的找水方法——218P₀测深法。对其操作过程和根据实测曲线识别含水层、确定含水层数、分析富水性,以及计算含水层底板埋深的方法作了分析,并对有关机理作了初步探讨。