地壳内的岩浆动力学过程及其资源与环境效应SCIEI北大核心CSCD

岩浆是将地球内部物质传送到表层系统的主要载体,并造成显著的资源聚集和环境效应。岩浆动力学是研究岩浆的迁移、储存、演化、就位以及喷发过程,侧重物理机制。这些岩浆过程主要发生在岩浆通道系统中,包括岩浆储库和岩浆管道。本文对目前国际岩浆动力学领域一些热点和前沿进行了介绍,这包括从岩浆房到岩浆储库概念的转变、岩浆储库的生长和动力学演化过程、岩浆过程的时间尺度以及岩浆中晶体的生长。然后阐述了岩浆中挥发分的种类和溶解度、获取天然岩浆挥发分含量的方法、一些典型镁铁质岩浆中的挥发分含量、岩浆去气的化学和物理机制,并简要梳理了热液金属矿床的形成过程和岩浆挥发分进入地表圈层系统引发的环境气候效应。最后列举了一些岩浆动力学有关的重要科学问题并建议了进一步的研究方向。     

早古生代古亚洲洋俯冲作用:来自新疆哈尔里克侵入岩的锆石U-Pb年代学、岩石地球化学和Sr-Nd同位素证据

新疆哈尔里克造山带的形成时间(早古生代/晚古生代)及其构造属性(岛弧/弧后盆地)一直是有争议的问题。本文选择位于哈尔里克带内的奥尔达乌台克侵入体,对其成因及所揭示的地质意义进行了探讨。奥尔达乌台克岩体由一套成份连续的岩石组合构成,包括辉长岩、辉长闪长岩、闪长岩和花岗闪长岩。对闪长岩及其内部暗色包体进行的LA-ICP-MS锆石U-Pb定年结果显示两者同时形成于~450Ma,为晚奥陶世岩浆活动的产物。岩石学和地球化学证据反映奥尔达乌台克岩体普遍具有富H2O、高fO2的湿岩浆性质,富集LREE、Sr、Ba等大离子亲石元素(LILE)而亏损Nb、Ta、Ti等高场强元素(HFSE),与典型的岛弧岩浆岩类似。高放射成因Nd(εNd(t)=+4.4~+5.9)和低初始Sr(0.7032~0.7044)同位素组成表明偏基性的岩浆很可能起源于年轻的俯冲带岩石圈地幔,生成的镁铁质岩浆一部分与壳源长英质熔体发生混合形成各类岩浆,另一部分则是经历演化后(分离结晶)直接添加到地壳中。因此,壳幔岩浆混合作用和幔源物质的直接加入是古亚洲洋俯冲阶段陆壳增生的两种主要方式。Sr-Nd同位素模拟排除了区内存在古老前寒武纪陆壳的可能,陆壳主体应该是年轻的古生代大洋岛弧和洋壳。哈尔里克早古生代岛弧的确立改变了该带是泥盆纪岛弧或弧后盆地的原有认识,将古亚洲洋俯冲作用的时间追溯至奥陶纪。     

中亚萨亚克矿田成矿岩体矿物学和地球化学:岩浆性质与成矿意义

萨亚克大型铜矿田位于哈萨克斯坦北巴尔喀什斑岩成矿带中部,以矽卡岩型矿床为主。通过对矿区石英闪长岩的矿物化学和地球化学研究,发现石英闪长岩呈斑状结构,斑晶为斜长石和角闪石,其中的斜长石斑晶主要为中长石,角闪石斑晶为镁质普通角闪石;岩石属于高钾钙碱性系列,富集Rb、Sr、Ba等大离子亲石元素和轻稀土元素,亏损Nb、Ta和重稀土元素,高Sr/Y、La/Yb比值,与埃达克岩相似。地球化学特征指示萨亚克矿区侵入岩形成于岛弧环境,为矽卡岩-斑岩型成矿提供了有利的构造背景,岩石可能是岛弧玄武质岩浆在高压下经结晶分异而成。根据角闪石温压计及其成分与氧逸度和岩浆中水含量之间的关系,确定萨亚克石英闪长玢岩中角闪石斑晶结晶时岩浆的温度为799~843℃、处于3.6~9.6km深度范围内(P=1.2~3.2kbar)、氧逸度logfO2=-11.5~-12.0(ΔFMQ=2.0~2.8)、平均水含量为1.2%,相对较高的氧逸度和水含量有利于形成富含挥发分和Cu、Au等成矿物质的岩浆,是最终演化形成大型岩浆-热液型铜矿田(斑岩型、矽卡岩型)的有利条件。     

长白山区二道白河流域早更新世玄武质熔岩的成因

采用岩石化学和同位素分析方法,研究了二道白河流域早更新世玄武质熔岩的成因。玄武质熔岩由钠质拉斑玄武岩和钾质粗面玄武岩、玄武质粗面安山岩组成。它们的REE分配形式比较相近,表明它们来自共同的源区。Sr、Nd、Pb同位素示踪表明,二道白河流域早更新世玄武质熔岩岩浆源区接近于似原始地幔。它们的Mg#=100Mg O/(Mg O+Fe O)低于中国东部新生代玄武岩原始岩浆的Mg#(60~68),Ni(27.76×10-6~200.6×10-6)低于原始地幔,Rb/Sr(0.05~0.09)、Ba/Rb(15.64~264)高于原始地幔,说明这些岩石不是源自原始地幔。玄武质熔岩的DI变化于42~67,具有高Ca、高Sr、Eu正异常,微量元素图解显示玄武岩保留部分熔融趋势,粗面玄武岩、玄武质粗安岩具有结晶分异趋势,岩浆上升过程中发生了不同程度的地壳混染作用。玄武质熔岩的Nb/Ta之比为14.8~15.8,与勘察加半岛深俯冲带火山类似。Nb/Ta-(Na2O-K2O)关系图解显示研究区玄武质岩浆的形成与俯冲板片的部分熔融有关。     

浙江中部芙蓉山花岗斑岩及包体岩石地球化学研究

花岗岩的源区、温压条件及与其他岩石的共生组合的研究可以限定其形成构造背景,了解其形成的深部动力学过程.本文对浙江中部中生代芙蓉山花岗斑岩及其暗色包体开展了全岩主微量元素、锆石U-Pb年代学和Hf同位素、Ti温度计和全岩Sr—Nd同位素研究,探讨芙蓉山花岗斑岩的成因类型、源区特征及其与镁铁质包体之间的关系,并进一步限定其...     

CO2 output and δ13C(CO2) from Mount Etna as indicators of degassing of shallow asthenosphere

 An estimated average CO₂ output from Etna's summit craters in the range of 13±3 Mt/a has recently been determined from the measured SO₂ output and measured CO₂/SO₂ molar ratios. To this amount the CO₂ output emitted diffusely from the soil (≈ 1 Mt/a) and the amount of CO₂ dissolved in Etna's aquifers (≈ 0.25 Mt/a) must be added. Data on the solubility of CO₂ in Etnean magmas at high temperature and pressure allow the volume of magma involved in the release of such an amount of this gas to be estimated. This volume of magma (≈ 0.7 km³/a) is approximately 20 times greater than the volume of magma erupted annually during the period 1971–1995. On the basis of C-isotopic data of CO₂ collected in the Etna area and of new hypotheses on the source of Mediterranean magmas, significant contributions of CO₂ from non-magmatic sources to the total output from Etna are unlikely. Such large outputs of CO₂ and also of SO₂ from Etna could be due to an anomalously shallow asthenosphere beneath the volcano that allows a continuous escape of gases toward the surface, even without migration of magma. Received: 7 August 1996 / Accepted: 9 November 1996     

Magma plumbing system of the 2000 eruption of Miyakejima Volcano, Japan

During the 2000 eruption at Miyakejima Volcano, two magmas with different compositions erupted successively from different craters. Magma erupted as spatter from the submarine craters on 27 June is aphyric basaltic andesite (<5 vol% phenocrysts, 51.4–52.2 wt% SiO₂), whereas magma issued as volcanic bombs from the summit caldera on 18 August is plagioclase-phyric basalt (20 vol% phenocrysts, 50.8–51.3 wt% SiO₂). The submarine spatter contains two types of crystal-clots, A-type and A-type (andesitic type). The phenocryst assemblages (plagioclase, pyroxenes and magnetite) and compositions of clinopyroxene in these clots are nearly the same, but only A-type clots contain Ca-poor plagioclase (An < 70). We consider that the A-type clots could have crystallized from a more differentiated andesitic magma than the A-type clots, because FeO*/MgO is not strongly influenced during shallow andesitic differentiation. The summit bombs contain only B-type (basaltic type) crystal-clots of Ca-rich plagioclase, olivine and clinopyroxene. The A-type and B-type clots have often coexisted in Miyakejima lavas of the period 1469–1983, suggesting that the magma storage system consists of independent batches of andesitic and basaltic magmas. According to the temporal variations of mineral compositions in crystal-clots, the andesitic magma became less evolved, and the basaltic magma more evolved, over the past 500 years. We conclude that gradually differentiating basaltic magma has been repeatedly injected into the shallower andesitic magma over this period, causing the andesitic magma to become less evolved with time. The mineral chemistries in crystal-clots of the submarine spatter and 18 August summit bombs of the 2000 eruption fall on the evolution trends of the A-type and B-type clots respectively, suggesting that the shallow andesitic and deeper basaltic magmas existing since 1469 had successively erupted from different craters. The 2000 summit collapse occurred due to drainage of the andesitic magma from the shallower chamber; as the collapse occurred, it may have caused disruption of crustal cumulates which then contaminated the ascending, deeper basalt. Thus, porphyritic basaltic magma could erupt alone without mixing with the andesitic magma from the summit caldera. The historical magma plumbing system of Miyakejima was probably destroyed during the 2000 eruption, and a new one may now form.Editorial responsibility: S Nakada, T Druitt     

Melt inclusion analysis of the Unzen 1991–1995 dacite: implications for crystallization processes of dacite magma

Dacitic magma, a mixture of high-temperature (T) aphyric magma and low-T crystal-rich magma, was erupted during the 1991–1995 Mount Unzen eruptive cycle. Here, the crystallization processes of the low-T magma were examined on the basis of melt inclusion analysis and phase relationships. Variation in water content of the melt inclusions (5.1–7.2 wt% H₂O) reflected the degassing history of the low-T magma ascending from deeper levels (250 MPa) to a shallow magma chamber (140 MPa). The ascent rate of the low-T magma decreased markedly towards the emplacement level as crystal content increased. Cooling of magma as well as degassing-induced undercooling drove crystallization. With the decreasing ascent rate, degassing-induced undercooling decreased in importance, and cooling became more instrumental in crystallization, causing local and rapid crystallization along the margin of the magma body. Some crystals contain scores of melt inclusions, whereas there are some crystals without any inclusions. This heterogeneous distribution suggests the variation in the crystallization rate within the magma body; it also suggests that cooling was dominant cause for melt entrapment. Numerical calculations of the cooling magma body suggest that cooling caused rapid crystal growth and enhanced melt entrapment once the magma became a crystal-rich mush with evolved interstitial melt. The rhyolitic composition of melt inclusions is consistent with this model.Editorial responsibility: H Shinohara     

Geometry and growth of sill complexes: insights using 3D seismic from the North Rockall Trough

Doleritic sill complexes, which are an important component of volcanic continental margins, can be imaged using 3D seismic reflection data. This allows unprecedented access to the complete 3D geometry of the bodies and an opportunity to test classic sill emplacement models. The doleritic sills associated with basaltic volcanism in the North Rockall Trough occur in two forms. Radially symmetrical sill complexes consist of a saucer-like inner sill at the base with an arcuate inclined sheet connecting it to a gently inclined, commonly ragged, outer rim. Bilaterally symmetrical sill complexes are sourced by magma diverted from a magma conduit feeding an overlying volcano. With an elongate, concave upwards, trough-like geometry bilaterally symmetrical sills climb away from the magma source from which they originate. Both sill complex types can appear as isolated bodies but commonly occur in close proximity and consequently merge, producing hybrid sill complexes. Radial sill complexes consist of a series of radiating primary flow units. With dimensions up to 3 km, each primary flow unit rises from the inner saucer and is fed by primary magma tube. Primary flow units contain secondary flow units with dimensions up to 2 km, each being fed by a secondary magma tube branching from the primary magma tube. Secondary flow units in turn are composed of 100-m scale tertiary flow units. A similar branching hierarchy of flow units can also be seen in bilaterally symmetrical sill complexes, with their internal architecture resembling an enlarged version of a primary flow unit from a radial sill complex. This branching flow pattern, as well as the interaction between flow units of varying orders, provides new insights into the origin of the structures commonly seen within sill complexes and the hybrid sill bodies produced by their merger. The data demonstrate that each radially symmetrical sill complex is independently fed from a source located beneath the centre of the inner saucer, grows by climbing from the centre outwards and that peripheral dyking from the upper surface is a common feature. These features suggest a laccolith emplacement style involving peripheral fracturing and dyking during inner saucer growth and thickening. The branching hierarchy of flow units within bilaterally symmetrical sill complexes is broadly similar to that of primary flow units within a radially symmetrical sill complex, suggesting that the general features of the laccolith emplacement model also apply.Editorial responsibility: J. Stix     

超大型会泽富锗铅锌矿复合成因

会泽富锗铅锌矿。是近年老矿山深部找矿取得重大突破的典范,而其成因则是当前研究、讨论的热点。笔者认为该矿之形成,既非“MVT型”,亦非“VMS型”,而是与深部隐伏燕山期酸性岩有关的中温岩浆热液叠加、改造、富化的复成因矿床。自加里东期起长期处于张裂环境。深部昭通．弥勒硅镁层隆起,既是幔源玄武岩（热地幔柱）上涌的前奏,又为深部矿源上升创造畅通空间。与多旋回活动的小江深断裂相沟通的NE向矩形断裂网,是导矿、输矿、储矿的有利构造。继火山热液成矿之后,伴随燕山期褶皱、断裂和深部酸性岩浆的上升,发生第二期叠加矿化．矿石中伴生与酸性岩有关的元素组合．并以与酸性岩有关的锗富集为特征。