Damming of large river by debris flow: Dynamic process and particle composition

The frequency and extent of debris flows have increased tremendously due to the extreme weather and the Wenchuan earthquake on May 12, 2008. Previous studies focused on the debris flow from gullies damming the mountain streams. In this paper, an equation for the run-out distance of debris flow in the main river is proposed based on the dynamic equation of debris flow at different slopes given by Takahashi. By undertaking field investigations and flume experiments, a new calculation method of the volume of debris flow damming large river is obtained. Using the percolation theory and the renormalization group theory it was deduced that the large particles should comprise more than 50% for forming a stable debris flow dam. Hence, the criteria of damming large river by debris flow is presented in terms of run-out distance and grain composition which was then validated through the event of damming river by debris flow at Gaojia gully, the upper reaches of the Minjiang River, Sichuan, China, on July 3, 2011.     

北太平洋150°E-165 °E海域柔鱼重心渔场的年间变动

利用空间距离和灰色关联度分析方法对1995～2001年间北太平洋150°E—165°E柔鱼作业渔场的重心分布进行比较研究,1995～1997年8～10月份作业渔场的重心与1998～2001年存在着较大的差异,前者基本上在150°E—153°30E的42°30′N以南海域,而后者位于155°E-161°E的42°45′N以北海域。聚类结果表明,8月份作业渔场重心分为三类:1998～2001年为一类,1996～1997年为一类,而1995年为一类。9月份产量重心与作业渔船重心的聚类结果则有所不同,产量重心的聚类结果为四类,即1999～2001年为一类,1997、1996年为一类,1998年和1995年各为一类;而作业渔船重心的聚类结果则分为三类,即1999～2001年为一类,1995～1997年为一类,1998年为一类;10月份作业渔场重心分为三类;1998、2001和1999年为一类,1995～1997年为一类,2000年为一类。年间的渔场变化可能是由海洋环境条件所引起。灰色关联分析表明,产量重心与作业渔船重心存在一定的差异。8～10月份作业渔场重心的总体变化趋势为向东北偏东移动。     

自动高精度测距系统

介绍了自动高精度测距系统。该系统能以５×１０－７的测距精度测定多个观测点的形变，可作为跨断层动态连续观测的新仪器。     

基于弹性力学的诱导劈裂注浆机制分析

针对隧道内水平超前劈裂注浆中浆液劈裂方向随机性的问题,提出一种诱导劈裂注浆方法,可以控制和改变浆液的劈裂方向。首先,基于弹性力学理论及其基本假定,分析竖向地应力大于水平地应力条件下对单一土层进行劈裂注浆时浆液沿竖向劈裂的力学机制,在此基础上探讨改变浆液劈裂方向为水平劈裂的必要性和诱导方法,并从应力集中的角度分析诱导劈裂注浆的力学机制;其次,采用有限元法研究注浆孔孔周劈裂方向控制点的应力随侧向压力系数和诱导孔与注浆孔间距变化而变化的情况,得出实现诱导劈裂注浆时两孔间距及侧向压力系数应满足的条件,并拟合两孔间距临界值的计算公式。结果表明：在离注浆孔上、下方4倍注浆孔径以内对称布设诱导孔,改变了注浆孔孔周劈裂方向控制点的应力场。当两孔间距小于实现诱导的临界距离值时,注浆孔孔周控制点的应力大小发生转换,浆液的劈裂方向发生改变,将沿水平方向劈裂。诱导孔与注浆孔间距的临界值会随着侧向压力系数的增大而逐渐增大。     

IDM模型分析及其影响力改进算法

影响力传播模型IDM用于挖掘和分析BBS上观点领袖以及热门话题,它主要以影响力作为衡量标准。通过简化影响力运算法则,对IDM模型进行改进,使其更加直观。此改进后的IDM模型可运用到社会网络中,能更深刻的揭示出社会网络中各通信个体间的相互影响和距离,从而更好地了解和研究社会网络。     

A comparison of two avalanche-models with exemplary avalanches of Tyrol and Switzerland and the effects to hazard zoning

For the purposes of a thesis at the Institute of avalanche and torrent control at the university of agriculture in Vienna a comparison of two avalanche-models, a hydraulic one from Voellmy/Salm/Gubler and a statistical one from Laatsch/Zenke/Dankerl with exemplary exactly known avalanches of Tyrol and Switzerland was started in 1993. The result of this work was that both models failed by the calculation of avalanches with high recurrence intervals (over 300 years). For the calculation of avalanches with recurrence intervals under 300 years the results of both models are regular. The conclusion is that a combination of two models i.e. a hydraulic one improved by statistical calculations will be the best.     

抗滑桩间土拱力学特性与最大桩间距分析

抗滑桩最大桩间距确定的基础理论至今未建立起来，工程实践中仍依赖专家经验。本文从方桩桩间土拱形成的原理、力学特性论证入手，较全面地分析了桩间土拱的受力、变形，力的传递和土拱破坏瞬间的最大桩间距。并建立了最大桩间距平面计算模型。     

Fast Nearest Neighbor Classification Methods for Multispectral Imagery

Nearest neighbor classifiers have not been widely used by remote sensing practitioners. The lack of acceptance of these classifiers may be partially due to their notoriously slow speed of execution which makes them impractical for the classification of mega-pixel images. However, training data reduction, distance measure optimization, and neighbor searching algorithms based on the modified k-d tree can speed nearest neighbor classification substantially.     

方向数据插值方法研究

方向数据是矢量数据的标量表示,通常标量数据的插值方法不适用于方向数据。本文根据方向数据的特征,把其分解成沿坐标轴的分量,通过对分量数据的插值形成表面,最后合成反算出方向数据,给出了一种对于方向数据的行之有效的插值方法;并用实验进行了验证,对其插值结果和精度进行了统计和分析,取得了较为理想的内插结果。     

一种深度图像拟合圆柱的优化方法

圆柱状构件广泛存在于古建筑仿真中,为了提高古建筑深度图像圆柱拟合的精度,针对古建筑仿真3维建模的特点,提出基于高斯图获取圆柱拟合参数初始值,然后利用圆柱距离函数参数化法进行非线性最小二乘拟合的圆柱拟合方法。实验证明,该方法不仅具有较高的精度,而且拟合结果稳定可靠。