Characterisation of the 1997 Vulcanian explosions of Soufrière Hills Volcano,Montserrat, by video analysis

The activity of Convention at Montserrat Soufrière Hills Volcano, Montserrat, during the period 1995–1999 included numerous violent explosions. Two major cycles of Vulcanian explosions occurred in 1997: a first of 13 explosions between 4 and 12 August and a second of 75 between 22 September and 21 October. The explosions were short-lived events lasting a few tens of seconds during which partial fountain collapse generated pyroclastic surges and pyroclastic flows, and buoyant plumes ascended 3–15 km into the atmosphere. Each explosion discharged on average 3×10⁵ m³ (dense-rock equivalent, DRE) of magma, draining the conduit to depths of 1–2 km. The paper focuses on the first few seconds of three explosions of the 75 that occurred in September/October 1997: 6 October 1997 at 17:50, 7 October 1997 at 16:02 and 9 October 1997 at 12:32. Physical parameters such as exit velocities, magmatic water contents and magma pressures at fragmentation are estimated by following and modelling the ascent of individual momentum-dominated finger jets visible on videos during the initial stages of each explosion. The model treats each finger jet as an incompressible flow sustained by a steady flux of gas and particles during the few seconds of ascent, and produces results that compare favourably with those using a multiphase compressible code run using similar eruptive parameters. Each explosion reveals a progressive increase in eruptive intensity with time, jet exit velocities increasing from 40 m s^–1 at the beginning of the explosion up to 140 m s^–1 after a few seconds. Modelling suggests that the first magma to exit was largely degassed, whereas that discharged after a few seconds contained up to 2 wt% water. Magma overpressures up to ~10 MPa are estimated to have existed in the conduit immediately prior to each explosion. Progressive increases in jet exit velocity with time over the first few seconds of each explosion provide direct evidence for strong pre-eruptive gradients in water content and magma pressure in the upper reaches (probably 100–500 m) of the conduit. Fountain collapse occurred during the first 10–20 s of each explosion because the discharging jets had bulk densities up to 100 times that of the atmosphere and were unable to entrain enough air to become buoyant. Such high eruptive densities were due to the presence of partially degassed magma in the conduit.Editorial responsibility: A. Woods     

略阳煎茶岭铜镍硫化物矿床Re—Os同位素年龄及其地质意义

采用矿石Re-Os同位素方法对陕西省煎茶岭硫化镍矿床矿石进行了成矿年代学研究,获得了878士27 Ma(1σ)的等时线年龄,首次厘定了该矿床成矿时代为新元古代,成岩成矿基本同时.通过对878 Ma硫化镍矿石初始Re-Os同位素体系的γOs计算和Re/Os值分析表明,其yOs和Re/Os值变化范围大,深部条带状矿石的Re/Os值仅为0.05,yOs为-6.70;块状矿石的Re/Os值范围为4.24～24.43,γOs为-15.37～+280.65,说明成矿过程中有壳源物质的混染;两件样品的γOs为负值(-15.37,-6.70),可能指示其超镁铁质岩浆来源于Re亏损地幔.煎茶岭超基性岩体年龄及其镍矿石的Re-Os等时线年龄与扬子克拉通北缘火山岩浆活动时间相对应,它们是扬子克拉通西北缘晋宁期构造岩浆成矿作用的产物.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

中子活化分析在铼—锇法年龄测定中的应用

同位素稀释中子活化分析铼与感耦等离子体质谱法测定锇相结合，应用于辉钼矿及铜＿镍硫化物矿物的铼＿锇年龄测定，取得了满意的结果，扩大了铼＿锇测年法的应用范围。     

建德铜矿床的海底喷流沉积成因

建德铜矿床是浙江西部多金属成矿带中一个引人瞩目的重要矿床。它产于中石炭统底部伴有火山岩、硅质岩和碧玉岩的白云岩中。整合块状矿体之下有一筒状矿化蚀变带。其成分以Ｃｕ＞Ｚｎ＞Ｐｂ为特征。根据矿床地质、地球化学特征以及近年来研究所获得资料，认为该矿床属海底喷流沉积成因     

南极乔治王岛中——新生代岩浆岩Sr—Nd—Pb同位素组成及源区特征

对乔治王岛１１个火山岩和２个侵入岩样品做了Ｓｒ－Ｎｄ－Ｐｂ同位素分析，其中（８７Ｓｒ／８６Ｓｒ）ｉ＝０．７０３２６～０．７０３９２，εＮｄ＝３．０２～６．７２，２０６Ｐｂ／２０４Ｐｂ＝１７．７７６～１８．５１５，２０７Ｐｂ／２０４Ｐｂ＝１５．．５０６～１５．５７１，２０８Ｐｂ／２０４Ｐｂ＝３７．８６８～３８．３０８。根据以上同位素组成及其相互关系并结合岩石学和微量元素特征及火山岩中熔融包裹体成分，得出以下结论：（１）研究的乔治王岛岩浆岩起源于亏损地幔（ＤＭＭ）和地幔流体交代成因的富集地幔ＥＭＩ混合形成的源区；（２）该源区具有广义Ｄｕｐａｌ异常，它正是由于ＥＭＩ组份加入即通过流体交代作用而产生的；（３）流体主要是俯冲深海沉积物脱碳酸盐作用而释放出的富ＣＯ２流体。     

内蒙古镁铁质-超镁铁质岩型铜镍矿床成矿条件与找矿远景分析

按构造环境控岩控矿特点,划分区内铜镍型矿成矿(岩)带,分析成矿条件,研究了与该类矿床成矿有关的镁铁质岩、超镁铁质岩分布规律及铜镍硫化物成矿特征,提出了找矿方向和建议.     

石岭沟-拐道沟铜-铅-锌多金属成矿带成矿地质条件分析

成矿带位于北秦岭北部晚元古代-早古生代裂谷带南缘的变质火山岩区，受油房-皇台断裂的次级分支断裂及燕山-印支期的侵入岩体及次火山岩脉的联合控制，成矿地质条件与甘肃白银厂铜-铅-锌矿田相类似，成矿带内地表已发现多条铜-铅-锌矿(化蚀变)体，找矿潜力较大，只要进一步深入开展工作，有望找到与白银厂铜-铅-锌矿田相类似的大型一超大型铜-铅-锌多金属矿床。     

Chemical Composition of Ores from the Takara Volcanogenic Massive Sulfide Deposit, Central Japan

Abstract. The Takara volcanogenic massive sulfide (VMS) deposit occurs in Miocene formation of the Misaka Mountain, the South Fossa Magna region, central Japan. The tectonic setting of the Misaka Mountain is reconstructed to be a part of the paleo Izu-Ogasawara arc which collided with the Honshu arc and to form accreted body in the present position. The Takara deposit, therefore, is considered to have formed in the paleo Izu-Ogasawara arc.
The ores from the Takara deposit are classified into pyrite-type ore, chalcopyrite-type ore, and sphalerite-type ore on the basis of chemical composition and their mineral assemblages. Some pyrite-type ores are characterized by their high Au content. The Au content is hardly recognized in the chalcopyrite-type and sphalerite-type ores.
The ores from the Takara deposit have intermediate bulk chemical composition between those from the Besshi-type deposits and the Kuroko-type deposits that are two representative VMS deposits. However, the bulk chemical composition is closer to that from the Kuroko-type deposits. And moreover, chemical composition of tetrahedrite-tennantite series minerals (tetrahedrite) is similar to that from the Kuroko-type deposits. The bulk chemical composition (Cu, Zn, Co, Pb, and As contents) of ores is affected by the chemical composition of volcanic rocks associated with VMS deposits.     

Origin and evolution of Pliocene–Pleistocene granites from the Larderello geothermal field (Tuscan Magmatic Province, Italy)

Extensive, mainly acidic peraluminous magmatism affected the Tuscan Archipelago and the Tuscan mainland since late Miocene, building up the Tuscan Magmatic Province (TMP) as the Northern Apennine fold belt was progressively thinned, heated and intruded by mafic magmas. Between 3.8 and 1.3 Ma an intrusive complex was built on Larderello area (Tuscan mainland) by emplacement of multiple intrusions of isotopically and geochemically distinct granite magmas. Geochemical and isotopic investigations were carried out on granites cored during drilling exploration activity on the Larderello geothermal field. With respect to the other TMP granites the Larderello intrusives can be classified as two-mica granites due to the ubiquitous presence of small to moderate amounts of F-rich magmatic muscovite. They closely resemble the almost pure crustal TMP acidic rocks and do not show any of the typical petrographic features commonly observed in the TMP hybrid granites (enclaves, patchy zoning of plagioclase, amphibole clots). On the basis of major and trace elements, as well as REE patterns, two groups of granites were proposed: LAR-1 granites (3.8–2.3 Ma) originated by biotite-muscovite breakdown, and LAR-2 granites (2.3–1.3 Ma) generated by muscovite breakdown. At least three main crustal sources (at 14–23 km depth), characterized by distinct ε_Nd(t) and ⁸⁷Sr/⁸⁶Sr values, were involved at different times, and the magmas produced were randomly emplaced at shallow levels (3–6 km depth) throughout the entire field. The partial melting of a biotite-muscovite-rich source with low ε_Nd(t) value (about −10.5) produced the oldest intrusions (about 3.8–2.5 Ma). Afterwards (2.5–2.3 Ma), new magmas were generated by another biotite-rich source having a distinctly higher ε_Nd(t) value (−7.9). Finally, a muscovite-rich source with high ε_Nd(t) (about −8.9) gave origin to the younger group of granites (2.3–1.0 Ma). The significant Sr isotope disequilibrium recorded by granites belonging to the same intrusion is interpreted, as due to the short residence time of magmas in the source region followed by their rapid transfer to the emplacement level. Partial melting was probably triggered by multiple, small-sized mafic intrusions, distributed over the last 3.8 Ma that allowed temporary overstepping of biotite- and muscovite-dehydration melting reactions into an already pre-heated crust. Dilution in time of the magmatic activity probably prevented melt mingling and homogenization at depth, as well as the formation of a single, homogeneous, hybrid pluton at the emplacement level. Moreover the high concentrations of fluxing elements (B, F, Li) estimated for the LAR granites modified melt properties by reducing solidus temperatures, decreasing viscosity and increasing H₂O solubility in granite melts. The consequences were a more efficient, fast, magma extraction and transfer from the source, and a prolonged time of crystallization at the emplacement level. These key factors explain the long-lived hydrothermal activity recorded in this area by both fossil (Plio-Quaternary ore deposits) and active (Larderello geothermal field) systems.