Hydrothermal Mineralization on the Mesoproterozoic Passive Continental Margins of China： A Case Study of the Langshan-Zha＇ertaishan Belt, Inner Mongolia, China

Most ore-forming characteristics of the Langshan-Zha‘ertaishan hydrothermal exhalation belt, which consists of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan large-superlarge Zn-Pb-Cu-Fe sulfide deposits, are most similar to those of Mesoproterozoic SEDEX-type provinces of the world. The characteristics include: (1) All deposits of this type in the belt occur in third-order fault-basins in the Langshan-Zha‘ertaishan aulacogen along the northern margin of the North China Platform; (2) these deposits with all their orebodies hosted in the Mesoproterozoic impure dolomite-marble and carbonaceous phyllite (or schists) have an apparent stratabound nature; ores display laminated and banded structures, showing clear depositional features; (3) there is some evidence of syn-sedimentary faulting, which to a certain extent accounts for the temporal and spatial distribution and the size of the orebodies in all deposits and the formation of intrabed conglomerates and breccias; (4) they show lateral and vertical zonation of sulfides; (5) The Cu/(Pb Zn Cu) ratio of the large and thick Pb Zn Cu orebodies gradually decreases from bottom to top; and (6) barite is interbedded with pyrites and sometimes with sphalerite. However, some characteristics such as the Co/Ni radio of the pyrites, the volcanism, for example, of the Langshan-Zha‘ertalshan metallogenic belt, are different from those of the typical SEDEX deposits of the world. The meta-basic volcanic rock in Huogeqi, the sodic bimodal volcanic rocks in the Dongshengmiao and potassic bimodal-volcanic rocks with blastoporphyfitic and blasto-glomeroporphyritic texture as well as blasto-amygdaloidal structure in the Tanyaokou deposits have been discovered in the only ore-bearing second formation of the Langshan Group in the past 10 years. The metallogeny of some deposits hosted in the Langshan Group is closely related to syn-sedimentary volcanism based on the following facts: most of the lead isotopes in sphalerite, galena, pyrite, pyrrhotite and chalcopyrite plot on both sides of the line for the mantle or between the lines for the mantle and lower crust in the lead isotope composition diagram; cobalt content of some pyrites samples is much higher than the nickel content (Co/Ni= 11.91-12.19). Some volcanic blocks and debris have been picked out from some pyritic and pyrrhotitic ores. All Zn-Pb-Cu-Fe sulfide orebodies in these deposits occur in the strata overlying metamorphic volcanic rocks in the only ore-bearing second formation. In the Jiashengpan deposit that lacks syn-sedimentary volcanic rocks in the host succession only Pb and Zn ores occur without Cu ore, but in the Dongshengmiao, Tanyaokou and Huogeqi deposits with syn-sedimentary volcanic rocks in the host succession Cu ores occur. This indicates a relatively higher ore-forming temperature. The process of synsedimentary volcanic eruption directly supplied some ore-forming elements, and resulted in secular geothermal anomaly favorable for the circulation of a submarine convective hydrothermal system, which accounts for the precipitation of deep mineralizing fluids exhaling into anoxidic basins along the syn-sedimentary fault system in the Langshan-Zha‘ertai rift. The Dongshengmiao, Tanyaokou, and Huogeqi deposits hosted in the Langshan Group appear to be a transitional type of mineral deposit between SEDEX and VMS-types but with a bias towards SEDEX, while the Jiashengpan deposit hosted in the Zha‘ertai Group is of a characteristic SEDEX type. This evidence, together with other new discoveries of Mesoproterozoic volcanic rocks and the features of lithogeny and metallogeny of the Bayun Obo deposit in the neighborhood emphasize the diversity, complexity and uniqueness of the Mesoproterozoic Langshan-Zha‘ertal-Bayun Obo ore belt.     

A quantitative, three-dimensional depositional model of gravelly braided rivers

A quantitative, three‐dimensional depositional model of gravelly, braided rivers has been developed based largely on the deposits of the Sagavanirktok River in northern Alaska. These deposits were described using cores, wireline logs, trenches and ground‐penetrating radar profiles. The origin of the deposits was inferred from observations of: (1) channel and bar formation and migration and channel filling, interpreted from aerial photographs; (2) water flow during floods; and (3) the topography and texture of the river bed at low‐flow stage. This depositional model quantitatively represents the geometry of the different scales of strataset, the spatial relationships among them and their sediment texture distribution. Porosity and permeability in the model are related to sediment texture. The geometry of a particular type and scale of strataset is related to the geometry and migration of the bedform type (e.g. ripples, dunes, bedload sheets, bars) associated with deposition of the strataset. In particular, the length‐to‐thickness ratio of stratasets is similar to the wavelength‐to‐height ratio of associated bedforms. Furthermore, the wavelength and height of bedforms such as dunes and bars are related to channel depth and width. Therefore, the thickness of a particular scale of strataset (i.e. medium‐scale cross‐sets and large‐scale sets of inclined strata) will vary with river dimensions. These relationships between the dimensions of stratasets, bedforms and channels mean that this depositional model can be applied to other gravelly fluvial deposits. The depositional model can be used to interpret the origin of ancient gravelly fluvial deposits and to aid in the characterization of gravelly fluvial aquifers and hydrocarbon reservoirs.     

Evolution and deposits of a gravelly braid bar, Sagavanirktok River, Alaska

The evolution, migration and deposits of a gravelly braid bar in the Sagavanirktok River, northern Alaska, are described in unprecedented detail using annual aerial photographs, ground‐penetrating radar (GPR) profiles, trenches and cores. Compound braid bars in the Sagavanirktok River form by chute cut‐off of point bars and by growth of mid‐channel unit bars. Subsequent growth is primarily by accretion of unit bars onto their lateral and downstream margins. The upstream ends of braid bars may be sites of erosion or unit bar deposition. Compound braid bar deposits vary in thickness laterally and are thickest in medial sections and near cut banks. Compound bar deposits are typically composed of three to seven sets of simple large‐scale inclined strata, each simple set formed by a unit bar. The simple large‐scale strata contain medium‐scale cross‐strata (from dune migration) and planar strata (from migration of bedload sheets). The upstream and medial parts of compound braid bar deposits show very little vertical variation in grain size, but downstream and lateral margins tend to fine upwards. The deposits are mostly poorly sorted sands and gravels, although sands tend to be deposited at the top of the braid bar, and open‐framework gravels preferentially occur near the top and base of the braid bar. The patterns of braid bar growth and migration, and the nature of the deposits, described from the Sagavanirktok River are generally similar to other sandy and gravelly braided rivers, and consistent with the theoretical braid bar model of Bridge (1993).     

Exploration Indices and Mineral Potential Map of the Kuroko Deposits in Northeast Japan

Abstract. Recent discoveries of seafloor hydrothermal mineralization in submarine volcanic centers of felsic magma in western Pacific island arcs are regarded as modern analogues of Kuroko type deposits. Studies of these deposits and their surrounding geology raised question whether the exploration activity for the Kuroko deposits on land which peaked in the 1960's was adequate or not. However, such an evaluation is not easy because the exploration data are about to be lost as a result of the closure of all the Kuroko mines in the area since 1994.
The Metal Mining Agency of Japan (MMAJ), therefore, decided to compile existing data on about 180 Kuroko deposits and related mineral occurrences in northeast Japan as a new Kuroko database.
This study extends a concept called "exploration indices" which was developed based on a case study of the thoroughly surveyed Hokuroku district to draw a potential map of the Kuroko occurrences for the entire northeast Japan quantitatively with a Geographical Information System (GIS). Effective exploration indices include: 1) distribution of dacitic-rhy-olitic submarine volcanic rocks of the Nishikurosawa and Onnagawa stages, 2) distribution of intrusive rocks of pre- and post-Kuroko horizon, 3) low aeromagnetic anomaly caused by hydrothermal alteration of magnetite, 4) low gravity anomaly which suggests depressions in the basement rocks such as a tectonic basin and/or caldera, and 5) nearby existence of vein type deposits. It is concluded that about 33 % of known Kuroko deposits fall within the high potential zone (score=4 and 5) that occupies only 4 % of the entire northeast Japan arc. The Kuroko potential map is, therefore, useful for limiting the target area for Kuroko type deposits in an island arc setting.     

Genetic significance of fluid inclusions in the CSA Cu–Pb–Zn deposit, Cobar, Australia

CSA mine exploits a ‘Cobar-type’ Cu–Pb–Zn±Au±Ag deposit within a cleaved and metamorphosed portion of the Cobar Supergroup, central New South Wales. The deposit comprises systems of ‘lenses’ that encompass veins, disseminations and semi-massive to massive Cu–Pb–Zn ores. The systems and contained lenses truncate bedding, are approximately coplanar with regional cleavage and similarly oriented shear zones and plunge parallel to the elongation lineation. Systems have extreme vertical continuity (>1000 m), short strike length (400 m) and narrow width (100 m), exhibit vertical and lateral ore-type variation and have alteration haloes. Models of ore formation include classical hydrothermalism, structurally controlled remobilisation and polymodal concepts; syntectonic emplacement now holds sway.Fluid inclusions were examined from quartz±sulphide veins adjacent to now-extracted ore, from coexisting quartz–sulphide within ore, and from vughs in barren quartz veins. Lack of early primary inclusions precluded direct determination of fluids associated with D₂–D₃ ore and vein emplacement. Similarly, decrepitation (by near-isobaric heating) of the two oldest secondary populations precluded direct determination of fluid phases immediately following D₂–D₃ ore and vein emplacement. Post-decrepitation outflow (late D₃ to early post-D₃) is recorded by monophase CH₄ inclusions. Entrained outflow of deeply circulated meteoric fluid modified the CH₄ system; modification is recorded by H₂O+CH₄ and H₂O+(trace CH₄) secondary populations and by an H₂O+(trace CH₄) primary population. The contractional tectonics (D₂–D₃) of ore emplacement was superseded by relaxational tectonics (D_4P) that facilitated meteoric water penetration and return flow.Under D₂ prograde metamorphism, entrapment temperatures (Tt) and pressures (Pt) for pre-decrepitation secondary inclusions are estimated as Tt300–330 °C and Pt1.5–2 kbar≈Plith (the lithostatic pressure). Decrepitation accompanied peak metamorphism (T350–380 °C) in mid- to late-D₃, while in late-D₃ to early post-D₃, essentially monophase CH₄ secondary inclusions were entrapped at Tt350 °C and Pt=1.5–2 kbar≈Plith. Subsequently, abundant CH₄ and entrained meteoric water were entrapped as H₂O+CH₄ secondaries under slowly decreasing temperature (Tt330–350 °C) and constant pressure (Pt1.5–2 kbar). Finally, with increasingly dominant meteoric outflow, H₂O+(trace CH₄) populations record decreasing temperatures (Tt>300 to <350 down to 275–300 °C) at pressures of Phydrostatic<Pt (1 kbar) <Plith (1.5 kbar).The populations of inclusions provide insight into fluid types, flow regimes and P–T conditions during parts of the deposit's evolution. They indirectly support the role of basin-derived CH₄ fluids in ore formation, but provide no insight into a basement-sourced ore-forming fluid. They fully support post-ore involvement of meteoric water. The poorly constrained entrapment history is believed to span 10 Ma from 395 to 385 Ma.     

Oxidation of As-bearing gold ore—a comparison of batch and column experiments

This study deals with the experimental determination of the rate of weathering and As release from Au-bearing sulfide ores of the Mokrsko-West deposit (Czech Republic). The elevated As contents in the ore and the possible As mobilisation must be taken into account due to the close proximity of the deposit to the Vltava River, a source of drinking water for Prague. Crushed and homogenized ore material was divided into four grain-size fractions showing uniform chemical and mineralogical composition and subjected to batch and column leaching experiments. The most important reactions controlling metal leaching include (i) oxidation of sulfides, (ii) carbonate equilibrium and (iii) precipitation of hydrated ferric oxides (HFO). Hydrated ferric oxides were found to be important sorbents of mobilized As. The highest concentration of As in the leachates was obtained from the 64–1000 μm fraction. The oxidation rate in the agitated batch experiment calculated on the basis of sulfate concentrations is an order of magnitude higher (3.8×10⁻⁹ to 4.4×10⁻⁸ mol SO₄²⁻ h⁻¹ g⁻¹) than in the static column experiment (9.6×10⁻¹⁰ to 7.4×10⁻⁹ mol SO₄²⁻ h⁻¹ g⁻¹). The higher oxidation rate of batch experiments is explained by abrasion of oxidation products (mainly HFO) and by further exposition of reaction surfaces of the sulfide grains.     

The magmatic to hydrothermal transition and its bearing on ore-forming systems

The exsolution of volatile phases from silicate magmas controls physical and chemical magma properties and influences large-scale geologic phenomena and processes having major societal and economic implications including the release of climate-altering gases to the atmosphere, the explosivity of volcanic eruptions, hydrothermal alteration, and the generation of magmatic–hydrothermal mineralization. These volatile phases exsolve from a wide variety of magmas and cover a very broad spectrum of compositions.

The transition from the orthomagmatic to the hydrothermal stages has important bearing on these fundamentally important geologic phenomena, and this report summarizes the published results of a dozen scientific investigations on the magmatic–hydrothermal transition as applied to volcanic eruption and magmatic–hydrothermal mineralization. These studies involve a variety of analytical and experimental methodologies, and many focus on fluid and melt inclusions from mineralized magmatic systems. A primary goal of each study is to better understand the role of magmatic volatiles and the importance of the magmatic–hydrothermal transition on these geologic processes.     

Mitigation of liquefaction and associated ground deformations by stone columns

Soil liquefaction and associated ground failures have been a major source of damage during the past earthquakes. The risk of liquefaction and associated ground deformation can be reduced by various ground-improvement methods including the stone column (gravel drain) technique. This paper presents the current state of the stone column technologies as a liquefaction countermeasure. A comprehensive review is provided aiming to: (a) identify key considerations for the general use of stone columns as a liquefaction countermeasure, (b) provide insights for design and construction, (c) compile the latest research developments, and (d) identify sources of useful information. Case histories of field applications and observed field performance are cited to portray different stone column applications and observed effectiveness. The paper identifies areas where more research is needed and includes recommendations for future research and development.     

“Three-Component” Digital Prospecting Method：A New Approach for Mineral Resources Quantitative Prediction and Assessment

“Three-component” method consists of three clase-connected aspects: geological anomaly,diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, oreexisting symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a “digital model“ for mineral resources prediction andassessment.     

Timing and intensity of groundwater movement during Egyptian Sahara pluvial periods by U-series analysis of secondary U in ores and carbonates

Wet climatic episodes are known to have prevailed in the Egyptian Sahara several times during the late Quaternary, most recently during the Holocene 8000 yr ago. Earlier wet episodes have been recognized as having occurred during the past 300,000 yr and have been dated by U-series methods in speleothems and in lake travertines. We show here that the times of enhanced groundwater movement can also be determined by ²³⁰Th/²³⁴U dating of secondary U in ores of uranium, iron, and phosphate. We also present evidence that such acceleration of groundwater movements is indicated by relatively low ²³⁴U/²³⁸U activity ratios in the secondary uranium. Our new data show that pluvial periods in Egypt occurred during marine oxygen isotope stages 4, 5, 6, and 7 and therefore are consistent with the view that the wet episodes are the results of migration of the tropical monsoonal belt driven primarily by the 23,000-yr precession cycle of the Milankovich curve, modulated by the 100,000-yr eccentricity cycle.