超级喷发(超级侵入)后成矿作用

本文仿照超级喷发的概念定义了超级侵入,并将超级火山对应于大型岩基.文章聚焦于这样一个科学问题:为什么大规模成矿作用发生在紧接着超级喷发和超级侵入之后？为此,首先探讨了峨嵋山地幔柱系统的活动规律.尽管少数学者对玄武质岩浆大规模喷出之前的千米级地壳隆升提出了质疑,峨嵋山火山岩系第一旋回底部玄武岩直接覆盖在喀斯特之上的新观察支持千米级隆升的认识.这表明,峨嵋山地幔柱快速上涌之初期,岩石圈子系统在相当长一段时间没有作出伸展响应,尽管局部已经发生了地壳岩石的部分熔融.因此,岩浆通道形成之后,首先喷出了巨厚层玄武岩,并且后者裹挟了部分长英质岩浆.此后,岩浆喷发的规模振荡性减小,直至消失和地表沉降.斜长石巨斑玄武岩和苦橄岩中橄榄石斑晶与基质间的不平衡表明这些晶体属于循环晶,暗示岩浆曾经在深部岩浆房滞留了相当长的时间,这将导致岩石圈受热膨胀和再次隆升以及岩浆的冻结.因此,下一阶段岩浆活动的开始要求有一个冻结岩浆房的活化机制.依据野外地质学和岩相学观察,文章详细描述了流体活化机制,并强调了提出这种机制的必要性.虽然多数作者偏好升温活化机制,流体活化机制对长英质和镁铁质岩浆成矿系统都是必需的.进而,结合地幔名义无水矿物的H₂O丰度及其对岩浆产生过程的贡献,提出岩浆产量与减压速率正相关而与流体产量反相关的观点.尽管水流体可以有效降低地幔橄榄岩的固相线温度从而有可能提高岩浆产量,新生代玄武岩中橄榄岩包体依然含有未分解的角闪石和云母且名义无水矿物依然含有较多的H₂O,表明快速减压条件下含水暗色矿物的分解反应和名义无水矿物的脱水作用都是低效的.将这种认识与峨嵋山地幔柱系统的振荡性运动结合在一起,结合成矿作用的基本解是成矿金属从流体中析出的认识,可以得出超大型矿床必然形成于超级喷发和超级侵入之后.攀枝花式铁矿的观察表明,两类代表性矿床都具有铁矿浆侵位发生在成矿系统演化最后阶段的特点.因此得出结论:超大型矿床的形成取决于岩浆通道向流体通道的转换.如果岩浆通道在尚未完全封闭之前被含矿流体所利用,大规模流体快速上升将产生超大型矿床.含矿流体透过残留于通道中的熔体上升,不仅冲刷通道中的残留熔体并使其聚集在火山岩系之下或侵位于其下部形成含矿小岩体,而且持续注入于小岩浆体中的含矿流体可以导致岩浆强烈分异形成层状岩体.当通道中残留熔体被消耗殆尽,沿着通道上升的只有含矿流体.这些含矿流体充填在自生长裂隙中并强烈排气,最终可形成矿浆型富矿体.考虑到通道的规模与关闭速率的关系,推测超级喷发/侵入发生时的岩浆主通道更容易转换为含矿流体通道,因而是圈定找矿靶区的首选目标.该模型似乎与观察结果相吻合,并可与岩浆成矿系统的复杂性、小岩体成大矿理论、透岩浆流体成矿理论和通道成矿假说有机地结合在一起,较合理解释了超级喷发/侵入后成矿作用的地球动力学背景和成矿过程.由于长英质和镁铁质岩浆系统中均可见岩基,我们建议将这类成矿作用统称为岩基后成矿作用.     

Geochronology and geochemistry of lithium-rich tuffs in the Sichuan basin,western Yangtze: Implication for the magmatic origin and final closure of eastern Paleo-Tethys

The felsic volcanogenic tuffs named “green-bean rocks” (GBRs), characterized by a green or yellowish green color, are widely distributed in the western Yangtze platform and have a high lithium content (286–957 ppm). This paper studies the ages, origin and tectonic setting of the GBRs in the Sichuan basin on the western margin of the Yangtze platform through the whole-rock geochemistry and zircon trace elements by using U–Pb dating and Hf–O isotopes. The GBR samples from the Quxian and Beibei sections yielded zircon U–Pb ages of 245.5 ± 1.8 Ma and 244.8 ± 2.2 Ma. These samples can be used as the isochronous stratigraphic marker of the Early–Middle Triassic boundary (EMTB) for regional correlation. The whole-rock and zircon geochemistry, and zircon Hf–O isotopes exhibited S-type geochemical affinities with high positive δ¹⁸O values (9.28‰–11.98‰), low negative ε_Hf(t) values (?13.87 to ? 6.79), and T_DM² ages of 2150–1703 Ma, indicating that the lithium-rich GBRs were generated by the remelting of the pre-existing ancient Paleoproterozoic layer without mantle source contamination in the arc-related/orogenic tectonic setting. The results of this study demonstrate that the lithium-rich GBRs in the western Yangtze platform were derived from arc volcanic eruptions along the Sanjiang orogen, triggered by the closure of the eastern Paleo-Tethys Ocean and the syn-collision between the continental Indochina and Yangtze blocks at ca. 247 Ma. This was marked by a major shift from I-type magmas with intermediate ε_Hf(t) values to S-type magmas with low negative ε_Hf(t) values. Collectively, our results provide new insights into the origin of the GBRs and decodes the closure of the eastern Paleo-Tethys.     

Study on Yanshanian metallogenic granitoids magmatism in Baoshan deposit,southern Hunan ProvinceSCIEI北大核心CSCD

本文对湘南宝山花岗闪长斑岩进行了系统的锆石和磷灰石U-Pb定年、岩石地球化学以及锆石Hf同位素研究,并探讨了宝山花岗闪长斑岩的岩石成因和构造意义。锆石和磷灰石的LA-ICP-MS U-Pb定年显示,宝山花岗闪长斑岩的成岩年龄为160Ma。综合元素和同位素地球化学证据,宝山花岗闪长斑岩的成因可能为新生地壳与古老地壳的混合熔融,同时宝山花岗闪长斑岩中发现的890±20Ma的继承锆石,验证了新元古代新生地壳的参与。磷灰石的主微量元素研究显示花岗闪长斑岩具有较高的氧逸度和Cl含量,Sr/Th比值具有较大变化,而La/Sm比值变化不大等特征,表明形成花岗闪长斑岩岩浆的母岩受到俯冲板片脱水形成的流体交代作用影响。在上述过程中,富含Cl和H2O的流体从板片中释放出来,引发地幔楔熔融,并对矿床中成矿金属元素进行提取。由于古太平洋板块俯冲引发的伸展-减薄运动,在地幔上涌过程中,新元古代新生地壳发生部分熔融,这些高温岩浆底侵老地壳源区,诱发老地壳部分熔融,进而发生了强烈的壳-壳混合作用,产生花岗闪长质岩浆。     

Periglacial and Fluvial Factors Controlling the Sedimentation of Pleistocene Breccia in NW Poland

Breccias were investigated on the terrace of the Toruń‐Eberswalde ice‐marginal valley at Rozwarzyn (NW Poland). Breccia layers include soft‐sediment clasts with diameters between 2 and 256 mm and soft‐sediment megaclasts with diameters from 256 mm to 7 m. The shape of the soft‐sediment clasts and megaclasts (derived from frozen sediments) in the breccia is diverse: from angular and irregular in the case of debris‐flow breccias to slightly rounded and tabular in fluvial breccias. These two types of breccias were developed during the Late Weichselian when the periglacial climate favored extensive lateral erosion by currents of frozen braided channels in the ice‐marginal valley. The dual presence of breccias of fluvial and debris‐flow origin in channel deposits is unique for Quaternary sediments. Zones of breccias existed in the channels where scours and obstacle marks related to megaclasts developed. The study of breccias shed new light on the fluvial processes in ice‐marginal valleys during the Pleistocene and can be considered as diagnostic for fluvio‐periglacial conditions.     

Melt inclusion analysis of the Unzen 1991–1995 dacite: implications for crystallization processes of dacite magma

Dacitic magma, a mixture of high-temperature (T) aphyric magma and low-T crystal-rich magma, was erupted during the 1991–1995 Mount Unzen eruptive cycle. Here, the crystallization processes of the low-T magma were examined on the basis of melt inclusion analysis and phase relationships. Variation in water content of the melt inclusions (5.1–7.2 wt% H₂O) reflected the degassing history of the low-T magma ascending from deeper levels (250 MPa) to a shallow magma chamber (140 MPa). The ascent rate of the low-T magma decreased markedly towards the emplacement level as crystal content increased. Cooling of magma as well as degassing-induced undercooling drove crystallization. With the decreasing ascent rate, degassing-induced undercooling decreased in importance, and cooling became more instrumental in crystallization, causing local and rapid crystallization along the margin of the magma body. Some crystals contain scores of melt inclusions, whereas there are some crystals without any inclusions. This heterogeneous distribution suggests the variation in the crystallization rate within the magma body; it also suggests that cooling was dominant cause for melt entrapment. Numerical calculations of the cooling magma body suggest that cooling caused rapid crystal growth and enhanced melt entrapment once the magma became a crystal-rich mush with evolved interstitial melt. The rhyolitic composition of melt inclusions is consistent with this model.Editorial responsibility: H Shinohara     

An Upper Pliocene coarse pumice breccia generated by a shallow submarine explosive eruption,Milos, Greece

The Filakopi Pumice Breccia (FPB) is a very well exposed, Pliocene volcaniclastic unit on Milos, Greece, and has a minimum bulk volume of 1 km³. It consists of three main units: (A) basal lithic breccia (4–8 m) mainly composed of angular to subangular, andesitic and dacitic clasts up to 2.6 m in diameter; (B) very thickly bedded, poorly sorted pumice breccia (16–17 m); and (C) very thick, reversely graded, grain-supported, coarse pumice breccia (6.5–20 m), at the top. The depositional setting is well constrained as shallow marine (up to a few hundred metres) by overlying fossiliferous and bioturbated mudstone. This large volume of fine pumice clasts is interpreted to be the product of an explosive eruption from a submarine vent because: (1) pumice clasts are the dominant component; (2) the coarse pumice clasts (>64 mm) have complete quenched margins; (3) very large (>1 m) pumice clasts are common; (4) overall, the formation shows good hydraulic sorting; and (5) a significant volume of ash was deposited together with the coarsest pyroclasts.The bed forms in units A and B suggest deposition from lithic-rich and pumiceous, respectively, submarine gravity currents. In unit C, the coarse (up to 6.5 m) pumice clasts are set in matrix that grades upwards from diffusely stratified, fine (1–2 cm) pumice clasts at the base to laminated shard rich mud at the top. The coarse pumice clasts in unit C were settled from suspension and the framework was progressively infilled by fine pumice clasts from waning traction currents and then by water-settled ash. The FPB displays important features of the products of submarine explosive eruptions that result from the ambient fluid being seawater, rather than volcanic gas or air. In particular, submarine pyroclastic deposits are characterised by the presence of very coarse juvenile pumice clasts, pumice clasts with complete quenched rims, and good hydraulic sorting.Electronic Supplementary Material Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.Editorial responsibility: J. Donelly-Nolan     

Shoshonite and sub-alkaline magmas from an ultrapotassic volcano: Sr–Nd–Pb isotope data on the Roccamonfina volcanic rocks,Roman Magmatic Province,Southern Italy

The Roccamonfina volcano is characterised by two stages of volcanic activity that are separated by volcano-tectonic caldera collapses. Ultrapotassic leucite-bearing rocks are confined to the pre-caldera stage and display geochemical characteristics similar to those of other volcanoes in the Roman Province. After the major sector collapse of the volcano, occurred at ca. 400 ka, shoshonitic rocks erupted from cinder cones and domes both within the caldera and on the external flanks of the pre-caldera Roccamonfina volcano. On the basis of new trace element and Sr–Nd–Pb isotope data, we show that the Roccamonfina shoshonitic rocks are distinct from shoshonites of the Northern Roman Province, but are very similar to those of the Neapolitan volcanoes. The last phases of volcanic activity erupted sub-alkaline magmas as enclaves in trachytic domes, and as lavas within the Monte Santa Croce dome. Ultrapotassic rocks of the pre-caldera composite volcano are plagioclase-bearing leucitites characterised by high levels of incompatible trace elements with an orogenic signature having troughs at Ba, Ta, Nb, and Ti, and peaks at Cs, K, Th, U, and Pb. Initial values of ⁸⁷Sr/⁸⁶Sr range from 0.70926 to 0.70999, ¹⁴³Nd/¹⁴⁴Nd ranges from 0.51213 to 0.51217, while the lead isotope rations vary between 18.788–18.851 for ²⁰⁶Pb/²⁰⁴Pb, 15.685–15.701 for ²⁰⁷Pb/²⁰⁴Pb, and 39.048–39.076 for ²⁰⁸Pb/²⁰⁴Pb. Shoshonites show a similar pattern of trace element depletions and enrichments to the earlier ultrapotassic leucite-bearing rocks but have a larger degree of differentiation and lower concentrations of incompatible trace elements. On the other hand, shoshonitic rocks have Sr, Nd, and Pb isotopes consistently different than pre-caldera ultrapotassic leucite-bearing rocks. ⁸⁷Sr/⁸⁶Sr ranges from 0.70665 to 0.70745, ¹⁴³Nd/¹⁴⁴Nd ranges from 0.51234 to 0.51238, ²⁰⁶Pb/²⁰⁴Pb ranges from 18.924 to 19.153, ²⁰⁷Pb/²⁰⁴Pb ranges from 15.661 to 15.694, and ²⁰⁸Pb/²⁰⁴Pb ranges from 39.084 to 39.212. High-K calc-alkaline samples have intermediate isotopic values between ultrapotassic plagioclase leucitites and shoshonites, but the lowest levels of incompatible trace element contents. It is argued that ultrapotassic magmas were generated in a modified lithospheric mantle after crustal-derived metasomatism. Interaction between the metasomatic agent and lithospheric upper mantle produced a low-melting point metasomatised veined network. The partial melting of the veins alone produced pre-caldera leucite-bearing ultrapotassic magmas. It was possibly triggered by either post-collisional isotherms relaxation or increasing T°C due increasing heat flow through slab tears. Shoshonitic magmas were generated by further melting, at higher temperature, of the same metasomatic assemblage with addition 10–20% of OIB-like astenospheric mantle material. We suggest that addition of astenospheric upper mantle material from foreland mantle, flowing through slab tearing after collision was achieved. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The Ordovician Sierras Pampeanas–Puna basin connection: Basement thinning and basin formation in the Proto-Andean back-arc

The Ordovician Sierras Pampeanas, located in a continental back-arc position at the Proto-Andean margin of southwest Gondwana, experienced substantial mantle heat transfer during the Ordovician Famatina orogeny, converting Neoproterozoic and Early Cambrian metasediments to migmatites and granites. The high-grade metamorphic basement underwent intense extensional shearing during the Early and Middle Ordovician. Contemporaneously, up to 7000 m marine sediments were deposited in extensional back-arc basins covering the pre-Ordovician basement. Extensional Ordovician tectonics were more effective in mid- and lower crustal migmatites than in higher levels of the crust. At a depth of about 13 km the separating boundary between low-strain solid upper and high-strain lower migmatitic crust evolved to an intra-crustal detachment. The detachment zone varies in thickness but does not exceed about 500 m. The formation of anatectic melt at the metamorphic peak, and the resulting drop in shear strength, initiated extensional tectonics which continued along localized ductile shear zones until the migmatitic crust cooled to amphibolite facies P–T conditions. P–T–d–t data in combination with field evidence suggest significant (ca. 52%) crustal thinning below the detachment corresponding to a thinning factor of 2.1. Ductile thinning of the upper crust is estimated to be less than that of the lower crust and might range between 25% and 44%, constituting total crustal thinning factors of 1.7–2.0. While the migmatites experienced retrograde decompression during the Ordovician, rocks along and above the detachment show isobaric cooling. This suggests that the magnitude of upper crustal extension controls the amount of space created for sediments deposited at the surface. Upper crustal extension and thinning is compensated by newly deposited sediments, maintaining constant pressure at detachment level. Thinning of the migmatitic lower crust is compensated by elevation of the crust–mantle boundary. The degree of mechanical coupling between migmatitic lower and solid upper crust across the detachment zone is the main factor controlling upper crustal extension, basin formation, and sediment thickness in the back-arc basin. The initiation of crustal extension in the back-arc, however, crucially depends on the presence of anatectic melt in the middle and lower crust. Consumption of melt and cooling of the lower crust correlate with decreasing deposition rates in the sedimentary basins and decreasing rates of crustal extension.     

Conflicting structural and geochronological data from the Ibituruna quartz-syenite (SE Brazil): Effect of protracted “hot” orogeny and slow cooling rate?

The Ibituruna quartz-syenite was emplaced as a sill in the Ribeira-Araçuaí Neoproterozoic belt (Southeastern Brazil) during the last stages of the Gondwana supercontinent amalgamation. We have measured the Anisotropy of Magnetic Susceptibility (AMS) in samples from the Ibituruna sill to unravel its magnetic fabric that is regarded as a proxy for its magmatic fabric. A large magnetic anisotropy, dominantly due to magnetite, and a consistent magnetic fabric have been determined over the entire Ibituruna massif. The magmatic foliation and lineation are strikingly parallel to the solid-state mylonitic foliation and lineation measured in the country-rock. Altogether, these observations suggest that the Ibituruna sill was emplaced during the high temperature (~ 750 °C) regional deformation and was deformed before full solidification coherently with its country-rock. Unexpectedly, geochronological data suggest a rather different conclusion. LA-ICP-MS and SHRIMP ages of zircons from the Ibituruna quartz-syenite are in the range 530–535 Ma and LA-ICP-MS ages of zircons and monazites from synkinematic leucocratic veins in the country-rocks suggest a crystallization at ~ 570–580 Ma, i.e., an HT deformation > 35My older than the emplacement of the Ibituruna quartz-syenite. Conclusions from the structural and the geochronological studies are therefore conflicting. A possible explanation arises from ⁴⁰Ar–³⁹Ar thermochronology. We have dated amphiboles from the quartz-syenite, and amphiboles and biotites from the country-rock. Together with the ages of monazites and zircons in the country-rock, ⁴⁰Ar–³⁹Ar mineral ages suggest a very low cooling rate: < 3 °C/My between 570 and ~ 500 Ma and ~ 5 °C/My between 500 and 460 Ma. Assuming a protracted regional deformation consistent over tens of My, under such stable thermal conditions the fabric and microstructure of deformed rocks may remain almost unchanged even if they underwent and recorded strain pulses separated by long periods of time. This may be a characteristic of slow cooling “hot orogens” that rocks deformed at significantly different periods during the orogeny, but under roughly unchanged temperature conditions, may display almost indiscernible microstructure and fabric.     

角闪石成分对东天山铜镍矿床岩浆过程的指示意义

图拉尔根、香山和天宇、白石泉岩浆铜镍硫化物矿床分别位于新疆东天山的觉罗塔格构造带和中天山地块,角闪石在这些矿床中均以贯通矿物产出。本研究通过这些矿床角闪石的主量和微量元素含量,讨论两个构造单元成矿岩浆的性质和演化过程。四个矿床的角闪石种属主要为韭闪石、镁绿钙闪石、浅闪石、钛闪石、钙镁闪石和镁闪石,结晶温度区间为940～1080℃,压力区间为250～450MPa,相当于11～15km的深度。图拉尔根和香山矿床的角闪石结晶温度和压力均相对较低(平均分别为1027℃、318MPa和1013℃、313MPa),可能与其所处的觉罗塔格构造带断裂发育,成矿母岩浆易于侵位到较浅处结晶有关。四个矿床角闪石结晶时岩浆的含水量均较高(4%左右),可能是俯冲交代作用导致的地幔源区本身水含量较高以及角闪石结晶较晚共同作用的结果。相较于觉罗塔格构造带的图拉尔根和香山矿床(0 ΔNNO 1. 7),角闪石氧逸度计指示中天山地块天宇和白石泉矿床的氧逸度变化范围大且偏低(分别是-0. 6 ΔNNO 1. 7和-0. 4 ΔNNO 1. 8)。中天山铜镍矿床的氧逸度特征及相对觉罗塔格构造带较低的微量元素Ce/Pb比值指示其岩浆侵位过程中受到的古老地块的混染作用较强。以上研究表明角闪石虽是玄武质岩浆中较晚结晶的矿物,但能为示踪铜镍矿床岩浆演化提供重要线索。