马来西亚沙捞越邦达、什兰江控矿角砾岩筒构造对比研究及其找矿意义

马来西亚沙捞越邦达、什兰江控矿角砾岩筒构造均为典型的浅成—半浅成角砾岩筒构造，角砾岩及控矿类型具有明显的垂向分带特点。邦达控矿角砾岩筒构造发育角砾岩筒上段的塌陷角砾岩，角砾岩筒剥蚀深度较浅，控制典型的高硫化型浅成低温金铜矿床，且其深部具有较大的找矿潜力。什兰江控矿角砾岩筒构造发育角砾岩筒下段的爆发角砾岩和中段的流化角砾岩，分别控制斑岩型金矿化和低硫化型浅成低温热液型金矿化，角砾岩筒剥蚀深度较大，对矿床的保存和找矿极为不利。     

Characterisation of the 1997 Vulcanian explosions of Soufrière Hills Volcano,Montserrat, by video analysis

The activity of Convention at Montserrat Soufrière Hills Volcano, Montserrat, during the period 1995–1999 included numerous violent explosions. Two major cycles of Vulcanian explosions occurred in 1997: a first of 13 explosions between 4 and 12 August and a second of 75 between 22 September and 21 October. The explosions were short-lived events lasting a few tens of seconds during which partial fountain collapse generated pyroclastic surges and pyroclastic flows, and buoyant plumes ascended 3–15 km into the atmosphere. Each explosion discharged on average 3×10⁵ m³ (dense-rock equivalent, DRE) of magma, draining the conduit to depths of 1–2 km. The paper focuses on the first few seconds of three explosions of the 75 that occurred in September/October 1997: 6 October 1997 at 17:50, 7 October 1997 at 16:02 and 9 October 1997 at 12:32. Physical parameters such as exit velocities, magmatic water contents and magma pressures at fragmentation are estimated by following and modelling the ascent of individual momentum-dominated finger jets visible on videos during the initial stages of each explosion. The model treats each finger jet as an incompressible flow sustained by a steady flux of gas and particles during the few seconds of ascent, and produces results that compare favourably with those using a multiphase compressible code run using similar eruptive parameters. Each explosion reveals a progressive increase in eruptive intensity with time, jet exit velocities increasing from 40 m s^–1 at the beginning of the explosion up to 140 m s^–1 after a few seconds. Modelling suggests that the first magma to exit was largely degassed, whereas that discharged after a few seconds contained up to 2 wt% water. Magma overpressures up to ~10 MPa are estimated to have existed in the conduit immediately prior to each explosion. Progressive increases in jet exit velocity with time over the first few seconds of each explosion provide direct evidence for strong pre-eruptive gradients in water content and magma pressure in the upper reaches (probably 100–500 m) of the conduit. Fountain collapse occurred during the first 10–20 s of each explosion because the discharging jets had bulk densities up to 100 times that of the atmosphere and were unable to entrain enough air to become buoyant. Such high eruptive densities were due to the presence of partially degassed magma in the conduit.Editorial responsibility: A. Woods     

Sedimentary facies during early stages of flooding in an extensional basin: the Brèche Rouge de Carboneras (Late Miocene, Almería/SE Spain)

The intramontane basins of the Betic Cordilleras (SE Spain) formed subsequent to the main phase of orogenic deformation during the middle Miocene in a close genetic relation to the Trans-Alboran Shear zone. Left lateral movements along a local branch (Carboneras fault zone, CF; strike NE–SW) of this zone played a major role in controlling the formation and dynamics of the Nijar-Carboneras Basin. To the south of the fault, a major phase of strike-slip faulting is recorded during the late Tortonian. The expression of this event is the Brèche Rouge de Carboneras (BRC), which seals a deep denudational surface on top of dislocated fault blocks formed by volcanics of the Cabo de Gata complex and early Tortonian shallow marine calcarenite. The sedimentary facies of this widely distributed unit in the Carboneras-Subbasin mirror the submarine topography and the distribution of the fault zones. Along strike-slip fault zones, autoclastic breccias and neptunian dikes preferentially oriented NW–SE and NE–SW occur, which are interpreted to represent the near-surface expression of the faults. Red limestone forms the groundmass of the autoclastic breccia and infills of neptunian dikes, which exhibit multiple phases of opening of fissures, gravitational sedimentary infill, lithification, and renewed creation of cracks. Steep relief, probably along fault scarps, was mantled by epiclastic volcanic conglomerate with a red carbonate matrix. Well-lithified coarse skeletal limestone rich in planktonic foraminifera formed pavements along sediment starved rocky surfaces in deep water. Laterally, within topographic depressions, the pavement limestone grades into thick accumulations of skeletal rudstone composed of fragmented azooxanthellate corals and stylasterid hydrozoans, which were concentrated by powerful bottom currents and gravitiy flows. Within the shallow water zone of dip slope ramps, cross-bedded calcarenite and calcirudite formed. Based on textures, fabrics and biota, rocks of the BRC were grouped into nine genetic lithofacies which document cryptic, deep-aphotic and shallow-photic environments typical of a sediment starved extensional basin.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

香炉碗子金矿床稳定同位素研究及矿床成因探讨

香炉碗子金矿床产于脆一韧性剪切带内，控矿围岩为火山隐爆角砾岩体，通过硫，铅，氢，氧，碳，锶等同位素及稀土元素的研究可以看出，该矿床是一个中，低温有大气水参与火山热液型金矿床，其火山岩岩浆属太古宙结晶基底重熔再造，壳幔混合型。     

论界牌峪地区“陀状”角砾岩成因及找矿意义

湖南石门界牌峪地区存在大量的所谓“陀状”角砾岩，它们互不相连，外观圆形，有的聚集成群或者呈完全孤立的山包。角砾岩地表多为椭圆状和等轴状，与围岩多呈刺穿状接触。通过地质学、岩石学和地球化学等方面研究，认为该区“陀状”角砾岩是一种由热泉气体及部分物质在封闭还原条件下产生急剧爆发所形成的特殊的角砾岩群。它们是一种极好的容矿控矿体，具有重要的找矿意义     

南极乔治王岛中——新生代岩浆岩Sr—Nd—Pb同位素组成及源区特征

对乔治王岛１１个火山岩和２个侵入岩样品做了Ｓｒ－Ｎｄ－Ｐｂ同位素分析，其中（８７Ｓｒ／８６Ｓｒ）ｉ＝０．７０３２６～０．７０３９２，εＮｄ＝３．０２～６．７２，２０６Ｐｂ／２０４Ｐｂ＝１７．７７６～１８．５１５，２０７Ｐｂ／２０４Ｐｂ＝１５．．５０６～１５．５７１，２０８Ｐｂ／２０４Ｐｂ＝３７．８６８～３８．３０８。根据以上同位素组成及其相互关系并结合岩石学和微量元素特征及火山岩中熔融包裹体成分，得出以下结论：（１）研究的乔治王岛岩浆岩起源于亏损地幔（ＤＭＭ）和地幔流体交代成因的富集地幔ＥＭＩ混合形成的源区；（２）该源区具有广义Ｄｕｐａｌ异常，它正是由于ＥＭＩ组份加入即通过流体交代作用而产生的；（３）流体主要是俯冲深海沉积物脱碳酸盐作用而释放出的富ＣＯ２流体。     

闽西北地区隐爆作用与火山岩型铀矿化

隐爆角砾岩体对火山岩型铀矿化的控制作用已为实践所证明，并引起高度重视。本文阐述了闽西北地区隐爆角砾岩形成的时空条件、与围岩的关系、分带性及其鉴别要素。以实例说明隐爆角砾岩体对铀矿化起控制作用的３种主要形式，指出了寻找隐爆角砾岩体的方法。     

山西阳高堡子湾金矿地质特征及找矿标志

堡子湾金矿位于华北地台北缘天镇断拱东部阳高凸起区，是与印支未－－海西期火山一次火岩有关的隐爆角砾岩型金矿床。成矿物质主要来自重熔型岩源－－石英二长（斑）岩，隐爆角砾岩为容矿岩石，与隐爆带总体走向平行的张扭性断裂为导矿构造，隐爆角砾岩的内部裂隙及角砾间隙，是良好的储矿构造。     

Origin and evolution of Pliocene–Pleistocene granites from the Larderello geothermal field (Tuscan Magmatic Province, Italy)

Extensive, mainly acidic peraluminous magmatism affected the Tuscan Archipelago and the Tuscan mainland since late Miocene, building up the Tuscan Magmatic Province (TMP) as the Northern Apennine fold belt was progressively thinned, heated and intruded by mafic magmas. Between 3.8 and 1.3 Ma an intrusive complex was built on Larderello area (Tuscan mainland) by emplacement of multiple intrusions of isotopically and geochemically distinct granite magmas. Geochemical and isotopic investigations were carried out on granites cored during drilling exploration activity on the Larderello geothermal field. With respect to the other TMP granites the Larderello intrusives can be classified as two-mica granites due to the ubiquitous presence of small to moderate amounts of F-rich magmatic muscovite. They closely resemble the almost pure crustal TMP acidic rocks and do not show any of the typical petrographic features commonly observed in the TMP hybrid granites (enclaves, patchy zoning of plagioclase, amphibole clots). On the basis of major and trace elements, as well as REE patterns, two groups of granites were proposed: LAR-1 granites (3.8–2.3 Ma) originated by biotite-muscovite breakdown, and LAR-2 granites (2.3–1.3 Ma) generated by muscovite breakdown. At least three main crustal sources (at 14–23 km depth), characterized by distinct ε_Nd(t) and ⁸⁷Sr/⁸⁶Sr values, were involved at different times, and the magmas produced were randomly emplaced at shallow levels (3–6 km depth) throughout the entire field. The partial melting of a biotite-muscovite-rich source with low ε_Nd(t) value (about −10.5) produced the oldest intrusions (about 3.8–2.5 Ma). Afterwards (2.5–2.3 Ma), new magmas were generated by another biotite-rich source having a distinctly higher ε_Nd(t) value (−7.9). Finally, a muscovite-rich source with high ε_Nd(t) (about −8.9) gave origin to the younger group of granites (2.3–1.0 Ma). The significant Sr isotope disequilibrium recorded by granites belonging to the same intrusion is interpreted, as due to the short residence time of magmas in the source region followed by their rapid transfer to the emplacement level. Partial melting was probably triggered by multiple, small-sized mafic intrusions, distributed over the last 3.8 Ma that allowed temporary overstepping of biotite- and muscovite-dehydration melting reactions into an already pre-heated crust. Dilution in time of the magmatic activity probably prevented melt mingling and homogenization at depth, as well as the formation of a single, homogeneous, hybrid pluton at the emplacement level. Moreover the high concentrations of fluxing elements (B, F, Li) estimated for the LAR granites modified melt properties by reducing solidus temperatures, decreasing viscosity and increasing H₂O solubility in granite melts. The consequences were a more efficient, fast, magma extraction and transfer from the source, and a prolonged time of crystallization at the emplacement level. These key factors explain the long-lived hydrothermal activity recorded in this area by both fossil (Plio-Quaternary ore deposits) and active (Larderello geothermal field) systems.