利用对数正态分布图解析徐州城市土壤中重金属元素来源和确定地球化学背景值

城市土壤指示了城市环境中重金属污染的状况.为了更好地评价人为因素对城市土壤的影响强度,确定城市土壤重金属元素的地球化学背景值是十分必要的.以徐州城市表层土壤中Pb、Cu、Zn、V、Se和Ti等重金属为例,利用对数正态分布图区分了不同元素的来源,其中Ti和V主要来自土壤母质的分化,而Pb、Cu、Zn和Se等的来源则比较复杂,表现为受人为因素作用强烈.这些结果与利用多元统计方法(如聚类分析和主成分分析)获得的结果一致.利用对数正态分布图获得了Pb、Cu、Zn、V、Se和Ti等元素的地球化学背景值.     

Integrated Interpretation of Interwell Connectivity Using Injection and Production Fluctuations

A method to characterize reservoirs, based on matching temporal fluctuations in injection and production rates, has recently been developed. The method produces two coefficients for each injector–producer pair; one parameter, λ, quantifies the connectivity and the other, τ, quantifies the fluid storage in the vicinity of the pair. Previous analyses used λ and τ separately to infer the presence of transmissibility barriers and conduits in the reservoir, but several common conditions could not be easily distinguished. This paper describes how λ and τ can be jointly interpreted to enhance inference about preferential transmissibility trends and barriers. Two different combinations are useful: one is a plot of log (λ) versus log (τ) for a producer and nearby injectors, and the second is a Lorenz-style flow capacity (F) versus storativity (C) plot. These techniques were tested against the results of a numerical simulator and applied to data from the North Buck Draw field. Using the simulated data, we find that the F–C plots and the λ–τ plots are capable of identifying whether the connectivity of an injector–producer well pair is through fractures, a high-permeability layer, multiple-layers or through partially completed wells. Analysis of data from the North Buck Draw field shows a reasonable correspondence between τ and the tracer breakthrough times. Of two possible geological models for Buck Draw, the F–C and λ–τ plots support the model that has less connectivity in the field. The wells in fluvial deposits show better communication than those wells in more estuarine-dominated regions.     

塔里木盆地北部隆起牙哈断裂带负反转过程与油气聚集

采用地层厚度分析、“零点”分析、位移 /距离曲线分析和断层生长指数分析等方法,讨论了牙哈负反转断裂带的几何学和运动学特征、主反转期及控油作用,结果表明牙哈主断裂主反转期为早白垩世,负反转活动结束于中新世康村期-上新世库车期。牙 1号断裂主反转期为中新世苏维依期,牙 2号断裂主反转期为晚白垩世-老第三纪,二者都于中新世康村期结束反转活动。牙哈断裂带油气聚集和分布与断裂的负反转活动有关。     

不同石漠化等级的孢粉组合特征及其生态指示意义——以花江实验区为例

以贵州省关岭县南部北盘江试验示范为例,分析了不同等级石漠化土地上的表土孢粉组合特征,揭示了孢粉组合特征与石漠化等级的相互关系.结果显示:石漠化地区的孢粉组合具有鲜明的特征,乔木与灌木合占16.1%,草本与蕨类植物合占58.9%,这反映了石漠化地区以草蕨类植物为主的植被状况;孢粉组合与石漠化等级呈良好的相关性,草蕨类植物随石漠化等级的升高比重由41%增加到77.6%,种类由14种增加到27种,乔木花粉所占比重由6.9%降到2.6%,植物种类不变;孢粉组合反映出三出凤尾蕨等蕨类植物对岩溶石漠化生态环境的适应性和代表性.     

遥感蚀变信息检测中背景与干扰问题研究

在不同自然景观区的遥感蚀变信息检测中,背景与干扰是2个复杂而又容易混淆的研究对象。本文结合光谱混合模型理论与随机变量概率分布相关理论,深入分析了遥感数据的光谱空间几何结构特征(重点剖析二维散点图),系统研究了背景与干扰的关系、复杂度以及干扰地物类型的划分等问题。这些问题的探讨为遥感蚀变信息检测的最佳方案设计和蚀变信息潜在性评价与准确提取提供了技术思路。     

Assessing the impact of the hydraulic properties of a crusted soil on overland flow modelling at the field scale

Soil surface crusts are widely reported to favour Hortonian runoff, but are not explicitly represented in most rainfall‐runoff models. The aim of this paper is to assess the impact of soil surface crusts on infiltration and runoff modelling at two spatial scales, i.e. the local scale and the plot scale. At the local scale, two separate single ring infiltration experiments are undertaken. The first is performed on the undisturbed soil, whereas the second is done after removal of the soil surface crust. The HYDRUS 2D two‐dimensional vertical infiltration model is then used in an inverse modelling approach, first to estimate the soil hydraulic properties of the crust and the subsoil, and then the effective hydraulic properties of the soil represented as a single uniform layer. The results show that the crust hydraulic conductivity is 10 times lower than that of the subsoil, thus illustrating the limiting role the crust has on infiltration. Moving up to the plot scale, a rainfall‐runoff model coupling the Richards equation to a transfer function is used to simulate Hortonian overland flow hydrographs. The previously calculated hydraulic properties are used, and a comparison is undertaken between a single‐layer and a double‐layer representation of the crusted soil. The results of the rainfall‐runoff model show that the soil hydraulic properties calculated at the local scale give acceptable results when used to model runoff at the plot scale directly, without any numerical calibration. Also, at the plot scale, no clear improvement of the results can be seen when using a double‐layer representation of the soil in comparison with a single homogeneous layer. This is due to the hydrological characteristics of Hortonian runoff, which is triggered by a rainfall intensity exceeding the saturated hydraulic conductivity of the soil surface. Consequently, the rainfall‐runoff model is more sensitive to rainfall than to the subsoil's hydrodynamic properties. Therefore, the use of a double‐layer soil model to represent runoff on a crusted soil does not seem necessary, as the increase of precision in the soil discretization is not justified by a better performance of the model. Copyright © 2005 John Wiley & Sons, Ltd.     

祁连山青海云杉林动态监测样地群落特征

依据中国森林生态系统动态监测样地设置方法,参照国际森林生态学大样地建设技术规范,于2010年和2011年在祁连山自然保护区青海云杉（Picea crassifolia kom.）林内建立了10.2 hm2动态监测样地,定位调查了样地内19 927株DBH≥1 cm活立木木本植物,完成了第一次群落特征调查和分析。调查结果表明：①青海云杉群落成层现象明显,可划分为乔木层、灌木层、草本层和苔藓层4个层次。乔木层是群落的最主要层,整体而言其垂直高度结构复杂性要大于灌木层和草本层,苔藓层较为发达。②青海云杉径级结构呈明显的倒“J”形,个体集中在径级1~5 cm至21~25 cm,其占到总个体数目的91.42%,青海云杉更新良好。③青海云杉DBH≥1 cm对应的树高结构呈“单峰”形,高度主要集中在小于6 m,占到总个体数目的60.00%,高度偏小,小树较多,中树占有一定的比例,大树较少。同时,树高和胸径二者之间显著符合二次函数关系（p＜0.05）,反映了青海云杉群落生物学特征。④从空间分布格局来看,青海云杉表现出明显的聚集性分布格局。对不同年龄段青海云杉小树、中树和大树点格局分析表明,随着龄级的增大,种群的聚集程度减小,即由聚集分布变为随机分布,表现出明显的扩散趋势。青海云杉个体分布没有明显的空间异质性,而且2 534株大树随机分布在该样地,表明该群落未受大范围的人为干扰。     

大城市边缘区农村居民点用地空间布局优化研究——对上海南汇地区的考察

大城市边缘区农村居民点用地存在用地粗放、布局散乱、难于规范管理等问题。以大城市边缘区农村居民点用地整理为契机,优化空间布局不仅有利于形成农村经济新增长点,还可促进农村居民点土地集约节约利用。在分析当地农村居民点用地现状及其分布状况的基础上,以典型地区——上海南汇地区为例,对其空间分布的随机性进行了检验,对农村居民点用地按标准偏差分类,并进一步按欧氏空间距离对大于2.25标准偏差的地块进行聚类分析。结果显示:南汇地区农村居民点用地的空间分布并不是随机分布,可分为远离中心类和集聚中心类两种类型。依据结果,提出了"远离中心方案"和"集聚中心方案"两种不同的农村居民点用地整理方案。     

An approach to analysing plot scale infiltration and runoff responses to rainfall of fluctuating intensity

Simulated rainfall of fluctuating intensity was applied to runoff plots on bare dryland soils in order to explore a new method for analysing the non‐steady‐state responses of infiltration and overland flow. The rainfall events all averaged 10 mm/h but included intensity bursts of up to 70 mm/h and lasting 5–15 min, as well as periods of low intensity and intermittency of up to 25 min. Results were compared with traditional steady‐state estimates of infiltrability made under simulated rainfall sustained at a fixed intensity of 10 mm/h. Mean event infiltration rate averaged 13.6% higher under fluctuating intensities, while runoff ratios averaged only 63% of those seen under constant intensity. In order to understand the changing soil infiltrability, up to three affine Horton infiltration equations were fitted to segments of each experiment. All equations had the same final infiltrability f_c, but adjusted values for coefficients f₀ (initial infiltrability) and K_f (exponential decay constant) were fitted for periods of rainfall that followed significant hiatuses in rainfall, during which subsurface redistribution allowed near‐surface soil suction to recover. According to the fitted Horton equations, soil infiltrability recovered by up 10–24 mm/h during intra‐event rainfall hiatuses of 15 to 20‐min duration, contributing to higher overall event infiltration rates and to reduced runoff ratios. The recovery of infiltrability also reduced the size of runoff peaks following periods of low intensity rainfall, compared with the predictions based on single Horton infiltration equations, and in some cases, no runoff at all was recorded from late intensity peaks. The principal finding of this study is that, using a set of affine equations, the intra‐event time variation of soil infiltrability can be tracked through multiple intensity bursts and hiatuses, despite the lack of steady‐state conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Calibration of an oscillating nozzle‐type rainfall simulator

Nozzle‐type rainfall simulators are commonly used in hydrologic and soil erosion research. Simulated rainfall intensity, originating from the nozzle, increases as the distance between the point of measurement and the source is decreased. Hence, rainfall measured using rain gauges would systematically overestimate the rainfall received at the ground level. A simple model was developed to adjust rainfall measured anywhere under the simulator to plot‐wide average rainfall at the ground level. Nozzle height, plot width, gauge diameter and height, and gauge location are required to compute this adjustment factor. Results from 15 runs at different rain intensities and durations, and with different rain gauge layouts, showed that a simple average of measured rain would overestimate the plot‐wide rain by about 20 per cent. Using the adjustment factor to convert measured rainfall for individual gauges before averaging improved the estimate of plot‐wide rainfall considerably. For the 15 runs considered, overall discrepancy between actual and measured rain is reduced to less than 1 per cent with a standard error of 0·97 mm. This model can be easily tested in the ?eld by comparing rainfall depths of different sized gauges. With the adjustment factor they should all give very similar values. Copyright © 2003 John Wiley & Sons, Ltd.