利用GPS位移和主应力方向观测资料进行川滇地区边界力的联合反演研究

在简要介绍了川滇地区的构造格局和构造运动特征的基础上，讨论了不同观测数据同时用于反演的合理性和物理意义，利用1998～2000年观测的9个测点位移数据和1986年以前所测的10个主应力方向数据，将边界力和相对权比λ作为待反演参数，并考虑了主要活动断裂运动特性，进行了弹性有限元数值反演计算。计算结果表明，现今川滇地区的构造活动主要力源仍来源于印度板块与欧亚大陆的碰撞，菲律宾海板块的挤压作用也不可忽略，这一结论说明了该地区现今构造运动的继承性活动特征。     

基于DEM的河流多尺度显示研究

进行了基于DEM的河流多尺度显示方法的研究和试验。采用斯特拉勒算法对河流线进行分级,通过DEM提取河流的高差、集水面积等属性信息,并以此为基础提出了对河流的主支流的自动判别的方法,最终以国家基础地理信息的全国1∶25万数据库为数据源实现了实验区域河流的多尺度显示。     

基于新型机载多角度传感器AMTIS的LAI反演

以实地测量数据为先验知识,利用AMTIS数据对顺义地区的一块小麦地进行了叶面积指数(LAI)反演实验研究,并用实地LAI数据进行了验证。通过利用实测数据作为模型参数,以及对干湿土壤分类和匹配表的调整,使反演结果和反演速度得到了提高。     

三峡库区云阳新城水平层状岩体高边坡变形破坏主要控制因素

本文对三峡库区云阳新城一些高边坡的勘察成果进行了总结,目的在于了解云阳新城区近水平岩层条件下边坡变形破坏的型式、主要控制因素及支护要点。结果表明,云阳新城高边坡普遍存在表层剥落现象,含膨胀性矿物(主要是伊利石和绿泥石)的泥质岩较快速风化作用是造成边坡表层剥落式渐进性破坏的主要原因;沿卸荷裂隙与泥化夹层的崩滑是边坡失稳的主要型式,但边坡之间崩滑失稳的程度存在较大差异,一些边坡存在相对较为强烈的卸荷及边坡失稳问题,主要归因于其存在与边坡近于平行的构造裂隙。认为及时进行护坡并在工程设计中考虑结构面的存在型式是边坡防护的重点。     

Formation of Concentric Rings Around Sources

Zones of increased concentration formed by a solvent flowing from a source are considered. A matehmatical model for forming such zones is proposed. It takes into account that such a zone is composed of a set of independent particles. Hence the distribution of a substance around the source can be explained by movement of an individual particle. In the model this movement is a continuous semi-Markov process with terminal stopping at some random point in space. Parameters of the process depend on the velocity field of the flow. Forward and backward partial differential equations for the distribution density of a random stopping point of the process are derived. The forward equation is investigated for the centrally symmetric case. Solutions of the equation demonstrate either a maximum or a local minimum at the source location. In the latter case a concentric ring around the source is formed. If different substances vary in their absorption rates, they can form separable concentration zones as a family of concentric rings.     

Palynological evidence for Jurassic strata in the Panagarh area, West Bengal, India

The Rajmahal Traps were discovered in the Panagarh area, West Bengal, during the exploration for coal resources. A Gondwana succession was found beneath the traps, consisting of the Early Cretaceous Intratrappean Rajmahal Formation, the Early Triassic Panchet Formation and the Late Permian coal-bearing Raniganj Formation. The present palynological study was aimed at confirming the age of the Panchet Formation. As a result of this study it has been found that Jurassic sediments are also included in the Panchet Formation. The study has revealed that the Panchet Formation, defined on a lithological basis, is a time-transgressive unit extending from the Early Triassic to the Late Jurassic, with a phase of non-deposition between the Middle Triassic and Middle Jurassic.     

岩溶地区桩基的有限元分析

岩溶地区长桩存在着遇洞率的问题。为了研究岩溶地区桩的受力特点,采用有限元法模拟岩溶地区桩基的工作方式,分析了岩层厚度对桩的影响以及桩的受力状态,并研究了去桩的可能性。计算结果表明:岩层厚度对桩的影响较大,岩层的位置对桩的应力不产生影响,仅对桩的位移产生影响。     

俯伪斜分段密集采煤法三维有限元数值模拟研究

俯伪斜分段密集采煤法,作为一种较新的采煤方法,在我国技术上还不很成熟,因此,首次针对京煤集团木城涧矿大台井的地质条件和赋煤状况,通过简化建立三维立体有限元模型,模拟计算了该矿煤层顶底板在开采前后运动变化情况。结果表明:煤层倾角、推采距离和开采巷道数三者是影响煤层顶底板运动规律的重要因素,得到了表征顶底板运动规律的顶底板法向最大应力和法向最大位移与三影响因素关系曲线,详细阐述了三影响因素下的煤层顶底板运动规律;同时,对现场开采中支撑压力大小,特别是在三影响因素下,超前支撑压力的作用范围与应力峰值位置进行了数值计算,并总结了其影响规律;最后,指出了该数值分析方法对现场开采将具有十分重要的应用价值和指导意义。     

Application of Weights of Evidence to Mineral Potential Mapping of Yujiacun Ore Field in Northwest Yunnan Province, China

The multivariate information conprehensive processing technique is especially important at present to the digital mineral prospecting. However, the GIS-based weights of evidence have provided us with powerful tool for the quantitative assessment of mineral resource potential. In this paper, the mineralization model is established, based on the achievements made by previous researchers, to mend such deficiencies ad few references on ore fields in Yujiacun, Yunnan Province and the shortage of quantitative prediction and assessment of mineral resources. In addition, the weights of evidence are used to make a systematic quantitative prediction and assessment of mineral resources there, so that 2 mineral prospecting target areas of grade Ⅰ and 8 mineral prospecting target areas of grade Ⅱ are delineated, providing the further mineral resource exploration with the basis for the selection of mineral deposits.     

Copper-Polymetal Metallogenic Series and Prospecting Perspective of Eastern Section of Gangdise

Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.