Isotope Method for Confined Groundwater Recharge of the Lower Reaches of the Heihe River, Inner Mongolia, China

Environmental isotopes have been applied to analyze confined groundwater recharge in the lower reaches of the Heihe River,Inner Mongolia.CFC is regarded as a tracer that determines the date of groundwater,the date being less than 45 a.The confined groundwater within the Gurinai area and Ejin Basin other than the surface water of Heihe River might have originated from precipitation from Qilian Mountain or/and the Tibetan Plateau.The deep confined groundwater overflows into an upper aquifer and emerges into the ground,forming springs and lakes within the low-lying area.The recharge volume is estimated to be around 400 million-cubic meters.     

Instability characteristics of the East Asian Monsoon recorded by high-resolution loess sections from the last interglacial (MIS5)

The selection of high-resolution loess sections is needed in order to determine the climatic variability of the East Asian Monsoon during the last interglacial. Two sequences of S1 on the eastern and west-ern sides of the Liupan Mountain were both composed of five paleosol layers and four loess layers,indicating that there were five strong summer monsoon events and four strong winter monsoon events in MIS5. This corresponds with other records of the East Asian Monsoon,along with NGRIP and the North Atlantic records,implying that the climate of the Northern Hemisphere was very instable during the last interglacial. Two layers of paleosols and one layer of loess had developed during MIS5a and MIS5c. Compared with MIS5e,the climate in MIS5a and MIS5c fluctuated more intensively on a millen-nial scale,whereas the climate was relatively stable in MIS5e.     

三维地震勘探激发参数选择与分析

文中介绍了山区进行三维地震勘探的重要性及其方法原理。以山西晋城煤业集团某勘探区为实例进行实地勘探和试验,并对试验结果进行了详细的分析,进一步验证了该方法的可行性。     

唐古拉山地区三叠纪层序地层分析及构造演化

三叠纪充填的一套碳酸盐岩—碎屑岩地层,被划分为两个超层序和5个层序单元。超层序Ⅰ以复理石建造为特征,是金沙江缝合带初始碰撞作用的产物,是唐古拉山地区三叠纪前陆盆地早期挠曲沉降构造活动的沉积响应,标志着晚三叠世诺利期前陆盆地业已形成;超层序Ⅱ以磨拉石与酸性火山岩建造为特征,是前陆盆地晚期冲断抬升构造演化的沉积响应,表明晚三叠世瑞替期来自造山带的沉积物开始越过前陆隆起向隆后盆地迁移。     

青藏高原羌塘中部果干加年山上三叠统望湖岭组的建立及意义

在果干加年山的主脊及其以北识别出一套稳定的沉积岩系,角度不整合于蛇绿混杂岩之上,以细砂岩、硅质粉砂岩为主,其中夹有大小不等的古生代外来岩块,底砾岩成分因地而异并具有快速堆积的特点,底部夹有流纹岩。厚度大于1633m。流纹岩夹层获得的锆石SHRIMPU-Pb谐和年龄为214Ma±4Ma,时代为晚三叠世诺利期。在剖面测制和区域对比的基础上建立了上三叠统望湖岭组,代表龙木错-双湖缝合带闭合以后接受的最早的沉积盖层。望湖岭组之下的蛇绿混杂岩获得阳起石Ar-Ar年龄219.7Ma±6.5Ma。同位素定年确定构造转化事件发生在214～220Ma之间,为龙木错-双湖缝合带的闭合时间提供了确切的时间约束,望湖岭组是这一事件的沉积记录,是龙木错-双湖缝合带蛇绿混杂岩之上首次发现的沉积盖层。     

On-going orogeny in the outer-arc of the Timor–Tanimbar region, eastern Indonesia

The Timor–Tanimbar islands of eastern Indonesia form a non-volcanic arc in front of a 7 km deep fore-arc basin that separates it from a volcanic inner arc. The Timor–Tanimbar Islands expose one of the youngest high P/T metamorphic belts in the world, providing us with an excellent opportunity to study the inception of orogenic processes, undisturbed by later tectonic events.Structural and petrological studies of the high P/T metamorphic belt show that both deformation and metamorphic grade increase towards the centre of the 1 km thick crystalline belt. Kinematic indicators exhibit top-to-the-north sense of shear along the subhorizontal upper boundaries and top-to-the-south sense in the bottom boundaries of the high P/T metamorphic belt. Overall configuration suggests that the high P/T metamorphic rocks extruded as a thin sheet into a space between overlying ophiolites and underlying continental shelf sediments. Petrological study further illustrates that the central crystalline unit underwent a Barrovian-type overprint of the original high P/T metamorphic assemblages during wedge extrusion, and the metamorphic grade ranged from pumpellyite-actinolite to upper amphibolite facies.Quaternary uplift, marked by elevation of recent reefs, was estimated to be about 1260 m in Timor in the west and decreases toward Tanimbar in the east. In contrast, radiometric ages for the high P/T metamorphic rocks suggest that the exhumation of the high P/T metamorphic belt started in western Timor in Late Miocene time and migrated toward the east. Thus, the tectonic evolution of this region is diachronous and youngs to the east. We conclude that the deep-seated high P/T metamorphic belt extrudes into shallow crustal levels as a first step, followed by doming at a later stage. The so-called ‘mountain building’ process is restricted to the second stage. We attribute this Quaternary rapid uplift to rebound of the subducting Australian continental crust beneath Timor after it achieved positive buoyancy, due to break-off of the oceanic slab fringing the continental crust. In contrast, Tanimbar in the east has not yet been affected by later doming. A wide spectrum of processes, starting from extrusion of the high P/T metamorphic rocks and ending with the later doming due to slab break-off, can be observed in the Timor–Tanimbar region.     

Development of a Continental Volcanic Field: Petrogenesis of Pre-caldera Intermediate and Silicic Rocks and Origin of the Bandelier Magmas, Jemez Mountains (New Mexico, USA)

The Miocene–Quaternary Jemez Mountains volcanic field(JMVF) is the site of the Valles caldera and associated BandelierTuff. Caldera formation was preceded by > 10 Myr of volcanismdominated by intermediate composition rocks (57–70% SiO₂)that contain components derived from the lithospheric mantleand Precambrian crust. Simple mixing between crust-dominatedsilicic melts and mantle-dominated mafic magmas, fractionalcrystallization, and assimilation accompanied by fractionalcrystallization are the principal mechanisms involved in theproduction of these intermediate lavas. A variety of isotopicallydistinct crustal sources were involved in magmatism between13 and 6 Ma, but only one type (or two very similar types) ofcrust between 6 and 2 Ma. This long history constitutes a recordof accommodation of mantle-derived magma in the crust by meltingof country rock. The post-2 Ma Bandelier Tuff and associatedrhyolites were, in contrast, generated by melting of hybridizedcrust in the form of buried, warm intrusive rocks associatedwith pre-6 Ma activity. Major shifts in the location, styleand geochemical character of magmatism in the JMVF occur withina few million years after volcanic maxima and may correspondto pooling of magma at a new location in the crust followingsolidification of earlier magma chambers that acted as trapsfor basaltic replenishment. KEY WORDS: crustal anatexis; fractional crystallization; Jemez Mountain Volcanic Field; Valles Caldera; radiogenic isotopes; trace elements     

Petrogenesis of the Tanzawa plutonic complex, central Japan: Exposed felsic middle crust of the Izu–Bonin – Mariana arc

The Miocene Tanzawa plutonic complex, consisting mainly of tonalite intrusions, is exposed at the northern end of the Izu–Bonin – Mariana (IBM) arc system as a consequence of collision with the Honshu Arc. The Tanzawa plutonic rocks belong to the calc-alkaline series and exhibit a wide range of chemical variation, from 43 to 75 wt% SiO₂. They are characterized by relatively high Ba/Rb and Ce/Nb ratios, and low abundances of K₂O, LIL elements, and rare earth elements (REE). Their petrographic and geochemical features indicate derivation from an intermediate parental magma through crystal fractionation and accumulation processes, involving hornblende, plagioclase, and magnetite. The Tanzawa plutonic complex is interpreted to be the exposed middle crust of the IBM arc, which was uplifted during the collision. The mass balance calculations, combining data from melting experiments of hydrous basaltic compositions at lower-to-middle crustal levels, suggest that parental magma and ultramafic restite were generated by dehydration partial melting (∼ 45% melting) of amphibolite chemically similar to low-K tholeiitic basalt. Partial melting of hydrated mafic lower crust might play an important role in felsic middle-crust formation in the IBM arc.     

西昌邛海泸山旅游地质资源特征

西昌邛海、泸山山水浑然一体,以其邛池夜月、碧波朝阳、渔村夕照、平湖秋月、三教合一寺庙群落同建于山中一道路上而闻名遐迩。邛海、泸山旅游资源十分丰富,种类齐全,并以四川省第二大天然湖泊优势,独特气候而名满天下。     

龙门山陆内俯冲带形成机制探讨

本文分析了龙门山陆内俯冲带两侧岩石圈的强度结构特征及在侧向力作用下所发生的变形过程。盆地岩石圈中高强度层厚而紧凑,显示了较好的整体高强度性;造山带岩石圈上地壳具高强度,其下为低强度层。在侧向挤压力的作用下,变形主要发生于造山带一侧,最可能的变形方式是其脆性上地壳出现倾向后陆的逆冲断层,盆地岩石圈沿此断层俯冲,挤压其下部的低强度层,使之发生韧性增厚变形。