北京石花洞的区域地质意义

在全国范围内，北京石花洞的层数最多，次生化学沉积物的叠置关系明显。该洞的大形态反映了北京西山新构造运动的历史，可以同华北地文斯和永定河阶地对比。洞内次生化学沉积物记录了中更新世以来，西山地区古环境变化的信息，可以和周口店洞穴中碎屑堆积物进行对比。     

淮南谢—矿煤的组成对甲烷吸附性的影响

从淮南谢—矿五层煤（Ｃ＿（１３）、Ｂ＿（１１ｂ）、Ｂ＿（１０）、Ｂ＿（４ｂ）和Ａ＿３）中精选出镜煤、壳质暗煤、惰性暗煤及构造煤，采用重量法，分别测定它们的甲烷吸附量，从而研究不同成分组成的煤其甲烷吸附性能。     

从天山乌鲁木齐河源1号冰川变化估计近百年来该地区夏季升温

通过冰川波动历史来揭示气候变化是一种重要的方法。然而，以往有关这一方面的研究大都是一些定性的。文章试图依据冰种变化来定量的研究气候变化，并且通过近百年来天山乌鲁木齐河源１号冰川的变化，揭示出本世纪以来该河源地区夏季气温上升约０．２３￣０．２５℃，同时，对于该冰川不同长度规模时的气候敏感性也进行了讨论。     

鄂湘桂地区栖霞组古氧相分析与层序地层和海平面变化

鄂湘桂地区，早二叠世栖霞组主要为贫氧沉积，通过恢复其形成时沉积环境水体中溶氧量特征及其变化，识别出６个古氧相和４种古氧相相序。古氧相类型、古氧相相序及相差分别反映了沉积环境海平面变化的相位，速度和幅度。古氧相分析从成因上刻画了地层层序的内部结构，成为本区栖霞组内关键性界面，副层序，体系域及层序识别和确定的基础，在对岩相组合单调，空间上岩相厚度变化不大，同时具缺氧成因特征的地层进行层序地层分析时，具     

Tectonic Evolution of the Himalayan Collision Belt

This paper discusses the tectonic divisions of the Himalayan collision belt anddeals with the tectonic evolution of the collision belt in the context of crustal accretion in thefront of the collision belt, deep diapirism and thermal-uplift extension and deep material flow-ing of the lithosphere-backflowing. Finally it proposes a model of the tectonic evolution-progressive intracontinental deformation model-of the Himalayan belt.     

Kinetics of the Gas-Phase Reactions of OH Radicals, NO3 Radicals and O3 with Three C7-Carbonyls Formed From The Atmospheric Reactions of Myrcene, Ocimene and Terpinolene

Rate constants for the gas-phase reactions of OH radicals, NO₃ radicals and O₃ with the C₇-carbonyl compounds 4-methylenehex-5-enal [CH₂=CHC(=CH₂)CH₂CH₂CHO], (3Z)- and (3E)-4-methylhexa-3,5-dienal [CH₂=CHC(CH₃)=CHCH₂CHO] and 4-methylcyclohex-3-en-1-one, which are products of the atmospheric degradations of myrcene, Z- and E-ocimene and terpinolene, respectively, have been measured at 296 ± 2 K and atmospheric pressure of air using relative rate methods. The rate constants obtained (in cm³ molecule^–1 s^–1 units) were: for 4-methylenehex-5-enal, (1.55 ± 0.15) × 10^–10, (4.75 ± 0.35) × 10^–13 and (1.46 ± 0.12) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively; for (3Z)-4-methylhexa-3,5-dienal: (1.61 ± 0.35) × 10^–10, (2.17 ± 0.30) × 10^–12, and (4.13 ± 0.81) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively; for (3E)-4-methylhexa-3,5-dienal: (2.52 ± 0.65) × 10^–10, (1.75 ± 0.27) × 10^–12, and (5.36 ± 0.28) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively; and for 4-methylcyclohex-3-en-1-one: (1.10 ± 0.19) × 10^–10, (1.81 ± 0.35) × 10^–12, and (6.98 ± 0.40) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively. These carbonyl compounds are all reactive in the troposphere, with daytime reaction with the OH radical and nighttime reaction with the NO₃ radical being predicted to dominate as loss processes and with estimated lifetimes of about an hour or less.     

天山乌鲁木齐河源一号冰川探地雷达测厚及其数据分析

探地雷达是一种利用电磁波的反射原理探测地下介质分布特征的地球物理勘探技术，在冰川研究中发挥了重要作用。在天山一号冰川上用探地雷达进行了探测，获得了能够清晰地分辨冰一岩界面的雷达剖面。根据这些雷达剖面读出冰厚值，再结合最新的冰川地形图，作出了天山一号冰川的冰厚等值线图和冰下地形图；并由天山一号冰川最新的表面积数据推算了冰储量。     

Environmental Properties of Minerals and Contaminants Purified by the Mineralogical Method

The investigation of the environmental properties of minerals, i.e., environmental mineralogy, is a branch of science dealing with interactions between natural minerals and spheres of the Earth surface as well as a reflection of global change, prevention of ecological destruction, participation in biomineralogy, and remediation of environmental pollution. Pollutant treatment by natural minerals is based on the natural law and reflects natural self-purification functions in the inorganic world, similar to that of the organic world - a biological treatment. A series of case studies related to natural self-purification, which were mostly completed by our group, are discussed in this paper. In natural cryptomelane there is a larger pseudotetragonal tunnel than that formed by [MnO6] octahedral double chains, with an aperture of 0.462-0.466 nm2, filled with K cations. Cryptomelane might be a real naturally-occurring mineral of the active octahedral molecular sieve (OMS-2). CrⅥ-bearing wastewater can be treate     

Composition and Assemblage Characteristics of Magnetic Minerals in Layer S_(5-1) of Xifeng and Duanjiapo Sections

Magneticmineralsintheloess paleosolseriesaccountforabout 1 % -2 %ofthetotal (LiuTungshengandZhangZhonghu ,1 962 ) .Duetotheiraerolianorigin ,themagneticmineralsarecomplicatedincomposition ,largeingrainsizerange ,andsignificantlydifferentincrystallinity .Asaresult,researchonthesemagneticmineralswouldbesetwithalotofdifficulties.Previousre searchersemployedopticalmicroscopic ,X raydiffractionandM ssbauerspectrometrictechniquestostudythemagneticmineralsintheloess paleosolseries,andchieflyontheb…     

Optimizing a layered and laterally constrained 2D inversion of resistivity data using Broyden's update and 1D derivatives

Dense profile-oriented resistivity data allows for 2D and 3D inversions. However, huge amounts of data make it practically impossible to do full 2D or 3D inversions on a routine basis. Therefore, a number of approximations have been suggested over the years to speed up computations. We suggest using a combination of Broyden's update on the Jacobian matrix with derivatives calculated using a 1D formulation on a parameterized 2D model of locally 1D layered models. The approximations bring down the effective number of 2D forward responses to a minimum, which again gives us the ability to invert very large sections. Broyden's update is not as useful with a parameterized problem as is the case with a smooth minimum structure problem that has been the usual application. 1D derivatives, however, seem to be very effective when initiating a full 2D solution with Broyden's update. We compare the different methods using two different kinds of data on two synthetic models and on two field examples. The most effective and reliable optimization combines 1D derivatives with a full 2D solution and Broyden's update. When using Broyden's update the Jacobian matrix needs to be reset every once in a while. We do this whenever the difference in data residual from the previous iteration is less than 5%. This combined inversion method reduces the computation time approximately a factor of 3 without losing model resolution.