Provenance Study of Fe–Ti Oxide Minerals in the Quaternary Sediments in Yichang Area and Its Implication of Formation Time of the Yangtze Three Gorges, China

The Three Gorges are considered to be critical to understand the formation of Yangtze River. Recent research results suggest that the Yangtze Three Gorges was created during the Quaternary but the exact time is debatable. Fe–Ti oxide minerals are seldom used to study sediment provenance, expecially using scanning electron microscopy(SEM), and energy dispersive spectrometer(EDS). In this study, the provenance of Quaternary sediments in Yichang area, which is located to the east of the Yangtze Three Gorges, was investigated by using SEM and EDS to research Fe–Ti oxides. The Panzhihua vanadium titanomagnetite and Emeishan basalt outcrop are located to the west of the Three Gorges. Further, the materials from them are observed in the Quaternary sediments of Yichang area. Fe–Ti oxide minerals from the Huangling granite are observed in the Yunchi and Shanxiyao Formations, which were formed before 0.75 Ma B.P., whereas Fe–Ti oxide minerals from the Huangling granite, Panzhihua vanadium titanomagnetite, and Emeishan basalt are observed in the riverbed and fifth-terrace sediments of the Yangtze River, which were formed after 0.73 Ma B.P.. Thus, we can infer that the Three Gorges formed after the deposition of the Shanxi Formation and before the fifth-terrace; i.e., 0.75–0.73 Ma B.P..     

Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.     

钻探-物探测井技术在覆盖区填图中的应用研究

钻探作为获取深部地质信息的最直接手段,可查明第四纪地层序列,确定基岩顶面埋深与起伏、验证推测模型、研究地质构造、圈定地质体间的重要接触关系,服务于覆盖区填图。物探测井是一种科学有效的井内探测手段,利用特定的岩性或岩性组合对应着特定的测井参数组合的特点,利用测井参数组合可识别地层的岩性、确定地层的深度与厚度,可进行地层划分对比等。钻探-物探测井技术的综合利用,将提高覆盖区勘探效率,降低勘探成本,为下一步开展的覆盖区填图工作提供技术方法支撑。     

山东黄金西岭勘查区深部勘探孔防斜与纠斜措施

西岭勘查区金矿找矿工作已全面进入勘探阶段,勘查区网度为80 m×80 m,对于钻孔质量要求十分严格：终孔靶点偏差不超过勘探网度的四分之一,即不超过20 m。对于西岭勘查区设计孔深均超过1500 m（部分钻孔设计甚至超过2500 m）的钻孔而言,这种要求远远超过地质岩心钻探规程要求。山东黄金地勘公司根据多年深孔施工经验,在防斜与纠斜方面均取得了一些突破,自主研发了钻具扶正器、独创了钻孔纠斜法,形成了一套实用的钻孔质量保证措施。     

上海砂性软土地层水平定向钻进泥浆性能调控技术

上海地区水平定向钻进铺管（HDD）钻遇不易成孔的砂性软土的概率甚高,这种地层对泥浆性能有特殊要求。但目前普遍使用的复配型增效商品土粉基调相近,难以就大量工程个案恰如其分地发挥关键功效。为此,论述了该类工程环境下泥浆性能设计要点,分析了材料添配的作用机理,重点给出了泥浆密度、粘度、切力以及失水量等参数调控的宜于实用的若干配材技术,以提供相类似工程条件下泥浆运用的可参考方法。     

软土区旋喷式插筋微型桩工艺试验研究

软土地质条件下建筑物的沉降变形和承载力要求越来越高,对基础施工工艺提出了较高要求。在高压旋喷施工工艺的基础上,提出旋喷式插筋微型桩施工工艺,开展了微型桩工艺试验研究,结果表明该工艺大幅提高了单桩桩基承载性能,为实际工程应用提供了技术数据支持。     

隆页2HF页岩气水平井钻井技术研究与实践

四川盆地周缘蕴藏有大面积常压低丰度海相页岩气,依目前的开发成本,储量难以动用,亟需开展低成本钻井工程工艺技术攻关,盘活该类页岩气资源。中石化华东油气分公司在渝东南武隆地区从钻、测、录、固等方面开展了低成本钻井技术研究。通过分析导致钻井成本高的原因,重点从井身结构优化、井眼轨迹控制优化、钻井工具优选、防漏堵漏措施以及测井、录井、固井工艺优化等方面进行了技术研究与现场实践,试验井隆页2HF井由导眼井与侧钻水平井两部分构成,钻井成本较邻井降低了30%,为武隆地区常压页岩气开发奠定了基础。     

典型矿区尾矿库特征污染物识别研究

通过对典型尾矿库土壤样品分析,利用重金属超标率、植物体BCF、污染因子的权重值筛选等通进行典型污染物识别,为开展尾矿库污染治理工作提供依据。     

三峡库岸滑坡变形特征及影响因素分析

三峡库区涉水滑坡主要影响因素是水位和降雨量,也是库区滑坡体失稳的主要影响因素和诱发因素。库区每年重复着水位升降不利于滑坡的稳定,而降雨特别是大强度的降雨也诱发产生滑坡。当水位波动遇到降雨,出现工况叠加,滑坡将加剧。因此,有必要对影响滑坡变形的主导因素进行了解分析。2016年6月三峡库区全面展开了自动化监测,使得数据统计方便可靠。本文采用滑坡变形速率、降雨量、库水位变化、最大水位变化速率、淹没程度,运用灰色关联度分析法对涉水滑坡进行了计算分析。水位下降阶段,文中土质滑坡变形受库水位影响最大。水位上升阶段,该土质滑坡上部变形受降雨影响最大,下部受水位影响最大。文中岩质滑坡总是受库水位影响最大。     

四川江油马角坝刺林包剖面二叠-三叠系间粘土岩研究

二叠-三叠纪之交华南地区普遍发育火山成因的粘土岩,其对于了解二叠纪末大规模火山活动及扬子板块碎屑物质来源具有重要意义。本文对扬子西缘马角坝刺林包剖面飞仙关组底部粘土岩进行了碎屑锆石U-Pb定年及原位Hf同位素测试、X衍射和全岩地球化学分析,以揭示粘土岩的岩石成分及物源信息。镜下特征、X衍射及主量元素特征表明岩石中粘土矿物主要为伊利石,含少量方解石、石英。碎屑锆石年龄显示,特征峰值年龄主要集中在2 615~2 383、1 868~1 328、1 186~778和430~246 Ma,并出现~250 Ma特征高峰,结合原位Hf同位素特征表明锆石与秦岭造山带、华南典型PTB剖面粘土岩及峨眉山大火成岩省具有较高的相似性。同时,通过微量、稀土元素分析发现粘土岩中Zr、Hf、Th、Cr、Co、Ti相对富集,与华南典型PTB粘土岩和峨眉山玄武岩相近,并结合构造背景及锆石特征,综合认为刺林包剖面PTB粘土岩来自于秦岭造山带及龙门山岛链局部剥蚀区、二叠纪末火山活动和峨眉山大火成岩省剥蚀岩体。