Organic geochemistry of marine source rocks and pyrobitumen-containing reservoir rocks of the Sichuan Basin and neighbouring areas,SW China

Three bitumen fractions were obtained and systematically analysed for the terpane and sterane composition from 30 Paleozoic source rocks and 64 bitumen-containing reservoir rocks within the Upper Sinian, Lower Cambrian, Lower Silurian, Middle Carboniferous, Upper Permian and Lower Triassic strata in the Sichuan Basin and neighbouring areas, China. These bitumen fractions include extractable oils (bitumen I), oil-bearing fluid inclusions and/or closely associated components with the kerogen or pyrobitumen/mineral matrix, released during kerogen or pyrobitumen isolation and demineralization (bitumen II), and bound compounds within the kerogen or pyrobitumen released by confined pyrolysis (bitumen III). In addition, atomic H/C and O/C ratios and carbon isotopic compositions of kerogen and pyrobitumen from some of the samples were measured. Geochemical results and geological information suggest that: (1) in the Central Sichuan Basin, hydrocarbon gases in reservoirs within the fourth section of the Upper Sinian Dengying Formation were derived from both the Lower Cambrian and Upper Sinian source rocks; and (2) in the Eastern Sichuan Basin, hydrocarbon gases in Middle Carboniferous Huanglong Formation reservoirs were mainly derived from Lower Silurian source rocks, while those in Upper Permian and Lower Triassic reservoirs were mainly derived from both Upper Permian and Lower Silurian marine source rocks. For both the source and reservoir rocks, bitumen III fractions generally show relatively lower maturity near the peak oil generation stage, while the other two bitumen fractions show very high maturities based on terpane and sterane distributions. Tricyclic terpanes evolved from the distribution pattern C₂₀ < C₂₁ < C₂₃, through C₂₀ < C₂₁ > C₂₃, finally to C₂₀ > C₂₁ > C₂₃ during severe thermal stress. The concentration of C₃₀ diahopane in bitumen III (the bound components released from confined pyrolysis) is substantially lower than in the other two bitumen fractions for four terrigenous Upper Permian source rocks, demonstrating that this compound originated from free hopanoid precursors, rather than hopanoids bound to the kerogen.     

基于Gabor变换和支持向量机的手写体字符识别算法

针对在手写字符识别中由于书写习惯和风格的不同造成字符模式不稳定的问题,将支持向量机SVM方法用于手写字符的识别.算法首先采用Gabor变换提取手写字符图像的特征参数,然后采用提取的特征训练SVM分类器.再应用SVM分类器分类和判别手写字符.实验表明这种方法具有良好的车牌识别效果,较强的鲁棒性,较大的应用价值.     

离散型湖泊水体提取方法精度对比分析

基于卫星遥感的陆地水体提取方法多种多样,并且应用广泛.对于水体分布支离破碎的枯水期湖泊,准确的水体提取方法尚不明晰,直接影响湖泊水域面积的提取精度.以鄱阳湖湖区为研究对象,利用ALOS遥感影像,以2.5 m高分辨率全色波段融合影像非监督分类(ISODATA)得到的水体面积为参考值,分别使用归一化水体指数(NDWI)法、NDWIISODATA法和基于近红外(NIR)的ISODATA法提取了10 m分辨率的水体分布,分析了不同方法提取结果之间的差异性及产生原因.结果表明:3种方法均可以较好地提取出水体,但利用ISODATA法提取的水体细部信息更为明显,面积值较NDWI法更大;相对于近红外单波段而言,基于NDWI图像的ISODATA法提取水体的精度更高.纵观3种方法,基于NDWI图像的ISODATA法提取的水体精度最高,基于近红外波段的ISODATA法提取结果次之,NDWI阈值法的提取效果最差.研究结果对于离散型湖泊水体提取方法及数据源的选择等具有重要的借鉴和参考意义.     

遥感蚀变信息提取方法在西天山班禅沟一带铜、铁矿找矿中的应用

应用遥感蚀变信息提取的方法,对新疆和静县班禅沟一带地表出露的与铜、铁矿有关的蚀变形成的特征波谱信息进行提取,综合分析影像特征和线性构造、环状构造的特点,初步圈定了该地区铜、铁矿化蚀变带的分布。通过野外的验证工作,据此建立了该地区应用遥感蚀变信息异常、影像地质特征进行找矿的模型。     

结合边缘编组的Hough变换直线提取

针对传统Hough变换用于直线检测存在的问题进行了细致的分析和归纳总结,在此基础上,提出一种结合边缘编组的Hough变换直线提取算法。该算法首先采用基于8邻域的边缘跟踪算法对Canny算子检测得到的边缘点进行编组;然后对每一个边缘组分别进行Hough变换,单独确定Hough变换原点和参数的取值范围。Hough变换过程中,采用迭代的"投票"方式,每次确定单一峰值点并删除对应像素。实验证明,该算法原理简单,能有效解决传统Hough变换存在的精度不高、计算复杂等问题。同时该算法具有较强的鲁棒性,可以有效处理不同类型的影像数据,适用于并行处理。     

基于地物特征提取的车载激光点云数据分类方法

车载激光扫描测量方法较传统摄影测量方法具有更多优点,它能快速采集大面积、高精度的三维空间数据,具有广阔的应用前景。针对车载激光扫描数据的分类问题,提出了一种基于地物特征提取的点云数据分类方法,即采用主成分分析(PCA)方法,在提取多种街区地物点云数据几何特征和总结地物对象特征知识规则的基础上,根据选取的主特征设计一套阶层式的分类方法,并利用该方法对一套车载激光点云数据进行了分类试验。结果表明,该方法的分类效果良好,具有一定的实用性。     

Triggered earthquakes and deep well activities

Earthquakes can be triggered by any significant perturbation of the hydrologic regime. In areas where potentially active faults are already close to failure, the increased pore pressure resulting from fluid injection, or, alternatively, the massive extraction of fluid or gas, can induce sufficient stress and/or strain changes that, with time, can lead to sudden catastrophic failure in a major earthquake. Injection-induced earthquakes typically result from the reduction in frictional strength along preexisting, nearby faults caused by the increased formation fluid pressure. Earthquakes associated with production appear to respond to more complex mechanisms of subsidence, crustal unloading, and poroelastic changes in response to applied strains induced by the massive withdrawal of subsurface material. As each of these different types of triggered events can occur up to several years after well activities have begun (or even several years after all well activities have stopped), this suggests that the actual triggering process may be a very complex combination of effects, particularly if both fluid extraction and injection have taken place locally. To date, more than thirty cases of earthquakes triggered by well activities can be documented throughout the United States and Canada. Based on these case histories, it is evident that, owing to preexisting stress conditions in the upper crust, certain areas tend to have higher probabilities of exhibiting such induced seismicity.     

高效液相色谱-电感耦合等离子体质谱联用检测土壤中的无机硒形态

土壤样品中亚硒酸盐Se(Ⅳ)和硒酸盐Se(Ⅵ)的形态分析中,提取剂的选择和检测方法是技术的关键。以往的提取剂容易导致硒形态发生转变或无法同时提取Se(Ⅳ)和Se(Ⅵ),常用的氢化物发生原子荧光光谱法无法直接测定Se(Ⅵ),而是通过差减法得出Se(Ⅵ)含量。本文对比了不同提取剂的提取能力,确定使用0. 1 mol/L氢氧化钠溶液作为提取剂,在55℃超声萃取土壤样品30 min,提取液经高效液相色谱分离,电感耦合等离子体质谱检测,建立了土壤中Se(Ⅳ)和Se(Ⅵ)的形态分析方法。采用Hamilton PRP X-100色谱柱,以6 mmol/L柠檬酸为流动相,pH=5. 5,在8 min内可完全分离Se(Ⅳ)和Se(Ⅵ),两者的检出限分别为0. 15μg/L、0. 16μg/L,线性相关系数(r~2)均大于0. 999。以土壤为基体进行加标回收试验,Se(Ⅳ)和Se(Ⅵ)的回收率在84. 2%～95. 8%之间,相对标准偏差为1. 4%～5. 3%(n=6)。该方法简单快速,具有良好的精密度和准确度,适用于土壤中无机硒的形态分析。     

利用GVG线采样技术提取农作物种植面积及其精度分析

GVG(GIS&Video&GPS)线采样系统提出以线状样区代替以往成数抽样中的点样区与面积样区概念,通过统计线状样区内作物种植面积成数来反映区域总体农作物种植面积成数。通过 GVG实地采样,将其结果与解译遥感影像提取的作物种植面积成数结果进行了对比分析,结果显示采用GVG线采样方式精确度较高,其采样系统具有实用性和推广价值。     

玻璃海鞘脂肪酸提取工艺的研究

用乙酸乙酯从玻璃海鞘中提取多不饱和脂肪酸,通过正交实验对提取工艺进行研究,得其最佳提取条件为：温度50℃,提取时间240min,料液比1：3,提取次数2次。按此工艺提取,得脂肪酸产率为1．22％,利用气相色谱进行分析,得其中多不饱和脂肪酸含量为66．40％,EPA和DHA含量之和为15．20％。